Skip to content

This a rework of Mahor's pellet extruder v3. Aiming to overcome the following challenges: Stability - the original design is a bit wobbly and flexible when mounted to the CR10, you can see in some of Maho's videos he has used aluminium to make the front and back plates, but as I don't have the tools to do this I wanted a 3D printed solution. Dus…

master
Switch branches/tags
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.

Universal-Pellet-Extruder-V3-ZQ-version

This a rework of Mahor's pellet extruder v3. Aiming to overcome the following challenges:

  • Stability - the original design is a bit wobbly and flexible when mounted to the CR10, you can see in some of Maho's videos he has used aluminium to make the front and back plates, but as I don't have the tools to do this I wanted a 3D printed solution.
  • Dust and mess - if your active cooling is blowing air into the hopper and you're printing with shredded waste plastic then you end up with bits of plastic getting blown everywhere. I wanted a different location for cooling (this is not a problem with pellets).
  • Prevent blockage - shredded waste plastic is very high friction and the pieces of it are very light so it dose not flow very well.
  • Make it easy to mount to my CR10 - now it mounts directly.

The stl files are kept on here:

For the extruder: https://www.thingiverse.com/thing:3032188

For the sterrer: https://www.thingiverse.com/thing:3051987

See the wiki for assembly instructions.

About

This a rework of Mahor's pellet extruder v3. Aiming to overcome the following challenges: Stability - the original design is a bit wobbly and flexible when mounted to the CR10, you can see in some of Maho's videos he has used aluminium to make the front and back plates, but as I don't have the tools to do this I wanted a 3D printed solution. Dus…

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published