Skip to content

User Guide

Thomas Wolf edited this page Feb 21, 2024 · 6 revisions
Table of Contents

Getting Started

Overview

If you're new to Git or distributed version control systems generally, then start here: https://git-scm.com/doc

The Preferences Dialog

Many of the configurations you will make in Eclipse are found in the Preferences Dialog. To open the Preference Dialog click Window > Preferences in the menu bar at the top. To see the preferences for git, click Team > Git in the tree on the left.

Basic Tutorial: Adding a project to version control

Configuration

Identifying yourself

Whenever the history of the repository is changed (technically, whenever a commit is created), Git keeps track of the user who created that commit. The identification consists of a name (typically a person's name) and an e-mail address. This information is stored in file ~/.gitconfig under dedicated keys. EGit will ask you for this information when you create your first commit. By default, this dialog is shown only once until you create a new workspace or tick the checkbox "Show initial configuration dialog" on the Git Preference page:

Image:Egit-0.11-initialConfigurationDialog.png

You can also untick "Don't show this dialog again" if you want to see it again later.

Instead of using this dialog, you can always change this information using the Git configuration:

  • Click Window > Preferences > Team > Git > Configuration
  • Click New Entry and enter the key value pairs user.email and user.name

Image:Egit-0.9-getstarted-email.png

Image:Egit-0.9-getstarted-name.png

Setting up the Home Directory on Windows

Add the environment variable HOME to your environment variables.

  1. In Windows 7, type "environment" at the start menu.
  2. Select "Edit environment variables for your account".
  3. Under "User Variables", click the "New" button.
  4. Enter "HOME" in the name field.
  5. Enter "%USERPROFILE%" or some other path in the value field.
  6. Click OK, and OK again. You have just added the Home directory on Windows.
  7. File > Exit, then restart the application.

Note that if you use Cygwin, you should already have HOME set. For example, if you installed Cygwin to C:\cygwin and your username is Fred, then Cygwin should have already set HOME to C:\cygwin\home\Fred (or something similar). You can verify this by entering echo %HOME% in the Windows command prompt, or echo $HOME in the Cygwin shell.

EGit needs this path for looking up the user configuration (.gitconfig). HOME should point to your home directory e.g. C:\Users\Tom. Ensure correct case! E.g. C:\users instead of C:\Users may cause problems!

If the HOME variable is not defined the home directory will be calculated by concatenating HOMEDRIVE and HOMEPATH.

If both HOME and HOMEDRIVE are not defined HOMESHARE will be used.

EGit shows a warning if HOME is not defined explicitly. Keep in mind that if you set the HOME environment variable while Eclipse is running, you will still see following warning. You will have to restart Eclipse for it to recognize the HOME value.

Image:Egit_no_home.png

Pointing out the System wide configuration

If you use Git for Windows as a companion to EGit, make sure EGit knows where Git is installed so it can find the "system wide settings", e.g. how core.autocrlf is set. Go to the settings and look under Team>Git>Configuration and then the System Settings tab.

If you selected one of the options to use Git from the Command Line Prompt when you installed Git for Windows, then the location of the system wide settings is filled in with a path and everything is fine. If not, use the Browse button to locate where Git is installed, e.g. C:\Program Files(x86)\Git.

This advice also applies to users of other Git packagings, e.g. Git under Cygwin or TortoiseGit.

Non-Windows users should in theory check this setting, but the system wide settings are usually not used on non-Windows platforms.

Create Repository

  • Create a new Java project HelloWorld. (In this case, the project was built outside of your Eclipse Workspace.)

    Image:Egit-0.9-getstarted-project.png

  • Select the project, click File > Team > Share Project.

  • Select repository type Git and click Next.

    Image:Egit-0.9-getstarted-share.png

  • To configure the Git repository select the new project HelloWorld.

    Image:Egit-0.9-getstarted-create-project.png

  • Click Create Repository to initialize a new Git repository for the HelloWorld project. If your project already resides in the working tree of an existing Git repository the repository is chosen automatically.

    Image:Egit-0.9-getstarted-project-created.png

  • Click Finish to close the wizard.

  • The decorator text "[master]" behind the project shows that this project is tracked in a repository on the master branch and the question mark decorators show that the .classpath and .project and the .settings files are not yet under version control.

    Image:Egit-0.9-getstarted-shared-project.png

Track Changes

  • Click Team > Add to Index on the project node. (This menu item is named Add on older versions of Egit.)

  • The + decorators show that now the project's files have been added to version control.

  • Mark the "bin" folder as "ignored by Git", either by right-clicking on it and selecting Team > Ignore or by creating a file .gitignore in the project folder with the following content:

    /bin

  • This excludes the bin folder from Git's list of tracked files.

  • Add .gitignore to version control (Team > Add):

    Image:Egit-0.11-getstarted-ignore-added.png

  • You may have to set your Package Explorer filters in order to see .gitignore displayed in the Package Explorer. To access filters, select the down arrow on the right edge of the Package Explorer tab to display View Menu.

    Image:Pe_downarrow1.png

  • Select Filters... from the View Menu and you will be presented with the Java Element Filters dialog. Unselect the top entry to display files that begin with . (period) such as .gitignore.

  • Click Team > Commit in the project context menu.

  • Enter a commit message explaining your change, the first line (followed by an empty line) will become the short log for this commit. By default the author and committer are taken from the .gitconfig file in your home directory.

  • You may click Add Signed-off-by to add a Signed-off-by: tag.

  • If you are committing the change of another author you may alter the author field to give the name and email address of the author.

  • Click Commit to commit your first change.

    Image:Egit-0.9-getstarted-commit.png

  • Note that the decorators of the committed files have changed as a result of your commit.

    Image:Egit-0.9-getstarted-commited.png

Inspect History

  • Click Team > Show in History from the context menu to inspect the history of a resource:

    Image:Egit-0.11-getstarted-history1.png

  • Create a new Java class Hello.java and implement it.

  • Add it to version control and commit your change.

  • Improve your implementation and commit the improved class.

  • The resource history should now show 2 commits for this class.

    Image:Egit-0.9-getstarted-application.png

    Image:Egit-0.11-getstarted-history2.png

  • Click the Compare Mode toggle button in the History View.

  • Double click src/Hello.java in the Resource list of the History View to open your last committed change in the Compare View.

    Image:Egit-0.11-getstarted-compare.png

Congratulations, you just have mastered your first project using Git !

GitHub Tutorial

Note: pushing to a GitHub repository via HTTPS or fetching from a private GitHub repository via HTTPS may ask you for your log-in credentials (username and password). Use a personal access token (PAT) as the password. Do not use your normal log-in password for your user account at GitHub!

You have to create the PAT first via the GitHub web UI. GitHub personal access tokens give you fine-grained control over what the token holder may do. This is done by assigning "scopes" to tokens. See the GitHub documentation for the details.

Some hints:

  • A token without scopes gives only read-only access to public information.
  • To get write access and access to private repositories your GitHub account has access to, set the repo scope for the token when you create it.

Create Local Repository

  • follow Getting Started to create a new local repository (with your content instead of the demo project).

Create Repository at GitHub

  • create a new repository at GitHub:

Image:Egit-0.10-github-create-repo.png

On the next screen you can see the URLs you may use to access your fresh new repository:

  • click SSH to choose the SSH protocol. It can be used for read and write access.

  • click HTTP to choose the HTTP protocol. It can also be used for read and write access.

  • click Git Read-Only to choose the anonymous git protocol for cloning. It's the most efficient protocol git supports. Since the git protocol doesn't support authentication it's usually used to provide efficient read-only access to public repositories.

    Image:Egit-0.10-github-cloneurl.png

Eclipse SSH Configuration

  • Open the Eclipse Preference Dialog (Window > Preferences). Navigate to and expand the Network Connections option and select SSH. Ensure that your SSH2 home is configured correctly (usually this is ~/.ssh) and contains your SSH2 keys:

Image:Egit-0.10-ssh-preferences.png

Further information about advanced SSH configuration (such as using Putty or another SSH agent with EGit) is available in the EGit FAQ (section SSH).

Push Upstream

  • Click Team > Remote > Push... and copy and paste the SSH URL of your new GitHub repository.

  • If you are behind a firewall which doesn't allow SSH traffic, use the GitHub HTTPS URL instead and provide your GitHub user and password instead of using the uploaded public SSH key. To store your credentials into the Eclipse secure store click Store in Secure Store.

  • Note: many HTTP proxies are configured to block HTTP URLs containing a user name, since disclosing a user name in an HTTP URL is considered a security risk. In that case remove the user name from the HTTP URL and only provide it in the user field. It will be sent as an HTTP header.

    Image:Egit-0.10-github-pushurl.png

  • Click Next and on first connection accept GitHub's host key.

  • Enter your SSH key's passphrase and click OK.

  • On the next wizard page click Add all branches spec to map your local branch names to the same branch names in the destination repository (on a one-to-one basis).

    Image:Egit-0.10-github-push-refspec.png

  • Click Next. The push confirmation dialog will show a preview of the changes that will be pushed to the destination repository.

    Image:Egit-0.10-github-push-preview.png

  • Click Finish to confirm that you want to push these changes.

  • The next dialog reports the result of the push operation.

    Image:Egit-0.10-github-pushresult.png

  • Point your browser at your GitHub repository to see that your new repository content has arrived.

    Image:Egit-0.10-github-pushed-repo.png

Concepts

Git is built on a few simple and very powerful ideas. Knowing them helps to understand more easily how git works.

Repository

The Repository or Object Database stores all objects which make up the history of the project. All objects in this database are identified through a secure 20 byte SHA-1 hash of the object content. This has several advantages:

  • comparing two objects boils down to comparing two SHA-1 hashes.
  • since object names are computed from the object content in the same way in every git repository, the same object will be stored under the same name in all repositories which happen to contain this object.
  • an object never changes once created (obvious since changing the contents means a new hash must be calculated and a new name assigned).
  • repository corruption can easily be detected by checking if the SHA-1 object name still is the secure hash of the object's content.

Git has four object types :

  • A Blob object stores file content.
  • A Tree object stores the directory structure and contains Blob objects and other Tree objects together with their file system names and modes.
  • A Commit object represents a snapshot of the directory structure at the time of the commit and has a link to its predecessor Commit object which form an acyclic graph of the repository revisions forming the repository history.
  • A Tag object is a symbolic named link to another repository object which contains the object's name and type. Optionally, it also contains information about who created the tag and other signing information.

The object database is stored in the .git/objects directory. Objects are either stored as loose objects or in a single-file packed format for efficient storage and transport.

Trust

Git provides a built-in trust chain through secure SHA-1 hashes which allows it to verify if objects obtained from a (potentially untrusted) source are correct and have not been modified since they have been created.

If you get the signed tag for e.g. a project release which you can verify with e.g. the tagger's (the project lead's) public signing key, git ensures that the chain of trust covers the following:

  • the signed tag identifies a commit object.
  • the commit object represents exactly one project revision including its content and history.
  • the commit object contains the tree of blob objects and other tree objects representing the directory structure of the project revision.
  • the blob objects contain the file contents for this project revision.

All of the involved object names can be checked for consistency using the SHA-1 algorithm to ensure the correctness of the project revision and that the entire history can be trusted.

Index

The Git Index is a binary file stored in the .git/index directory containing a sorted list of file names, file modes, and file meta data used to efficiently detect file modifications. It also contains the SHA-1 object names of blob objects.

It has the following important properties:

  • The index contains all information necessary to generate a single uniquely defined tree object. E.g. a commit operation generates this tree, stores it in the object database and associates it with the commit.
  • The index enables fast comparison of the tree it defines with the current working directory. This is achieved by storing additional meta data about the involved files in the index data.
  • The index can efficiently store information about merge conflicts between the trees involved in the merge so that for each pathname there is enough information about the involved trees to enable a three-way merge.

Branches

A branch in Git is a named reference to a commit. There are two types of branches, namely "Local" and "Remote Tracking" branches which serve different purposes.

Local Branches

Whenever a change to a (local) Repository is committed, a new commit object is created. Without any other means, it would be very difficult to keep track of the changes in the Repository, in particular when other commits are added to the Repository, for example due to an update from the remote Repository or when checking out another commit.

A local branch helps with this task by providing a (local) name by which the "current" commit can be found. When changes are committed to the local repository, the branch is automatically updated to point to the newly created commit.

In addition, it is possible to add a so-called upstream configuration to a local branch which can be helpful when synchronizing with a remote repository.

Remote Tracking Branches

Remote tracking branches are created automatically when cloning and fetching from remote repositories. A remote tracking branch in the local repository always corresponds to a (local) branch in the remote repository. The name of such a branch follows certain conventions.

The remote tracking branch points to the same commit as the corresponding branch in the remote repository (at the time of the clone/fetch).

Remote tracking branches can be used for automated creation of upstream configuration for local branches.

Working Directory

The working directory is the directory used to modify files for the next commit. By default it is located one level above the .git directory. Making a new commit typically involves the following steps:

  • Check out the branch the new commit shall be based on. This changes the working directory so that it reflects the HEAD revision of the branch.
  • Do modifications in the working directory.
  • Tell git about these modifications (add modified files). This transfers the modified file contents into the object database and prepares the tree to be committed in the index.
  • Commit the tree prepared in the index into the object database.
  • The result is a new commit object and the HEAD of the current branch moves to the new commit.

Recording Changes in the Repository

You start from a fresh checkout of a branch of a local repository. You want to do some changes and record snapshots of these changes in the repository whenever you reach a state you want to record.

Each file in the working directory can either be tracked or untracked:

  • Tracked files are those which were in the last snapshot or files which have been newly staged into the index. They can be unmodified, modified, or staged.
  • Untracked files are all other files (they were not in the last snapshot and have not yet been added to the index).

When you first clone a repository, all files in the working directory will be tracked and unmodified since they have been freshly checked out and you haven't started editing them yet.

As you edit files, git will recognize they are modified with respect to the last commit. You stage the modified files into the index and then commit the staged changes. The cycle can then repeat.

This lifecycle is illustrated here:

Image:Egit-0.9-lifecycle-file.png

Tasks

Creating Repositories

Considerations for Git Repositories to be used in Eclipse

The short story

When setting up Git Repositories with EGit, there are two recommendations for the creation of "productive" (as opposed to "playground") Repositories:

  • Don't create the Repository within the Eclipse workspace.
    • Be careful when cloning or creating a Repository.
    • Make sure to use the Git Sharing Wizard correctly.
  • Don't create a Repository with an Eclipse project as root.
    • Make sure to use the Git Sharing Wizard correctly.

The first mistake happens when you specify a workspace folder during cloning or creation of a Repository.

Both mistakes will happen when you use the Git Sharing Wizard from an Eclipse project that you have created manually in your workspace without taking precautions (the wizard has been fixed in the latest version).

Below you will find some motivation for these recommendations.

The longer story

Eclipse Workspace and Repository working directory

Git Repositories can be created in different ways, for example by cloning from an existing Repository, by creating one from scratch, or by using the EGit Sharing wizard.

In any case (unless you create a "bare" Repository, but that's not discussed here), the new Repository is essentially a folder on the local hard disk which contains the "working directory" and the metadata folder. The metadata folder is a dedicated child folder named ".git" and often referred to as ".git-folder". It contains the actual repository (i.e. the Commits, the References, the logs and such).

The metadata folder is totally transparent to the Git client, while the working directory is used to expose the currently checked out Repository content as files for tools and editors.

Typically, if these files are to be used in Eclipse, they must be imported into the Eclipse workspace in one way or another. In order to do so, the easiest way would be to check in .project files from which the "Import Existing Projects" wizard can create the projects easily. Thus in most cases, the structure of a Repository containing Eclipse projects would look similar to something like this:

Image:EGit-0.12-SetupRepo-RepoStructureTwoProjects.jpg

Implications

The above has the following implications:

  • It is probably not a good idea to make a project the root folder of your Repository.

The reason is that you will never be able to add another project to this Repository, as the .project file will occupy the root folder; you could still add projects as sub-folders, but this kind of project nesting is known to cause lots of problems all over the place. In order to add another project, you would have to move the project to a sub-folder in the Repository and add the second project as another sub-folder before you could commit this change.

  • It is a good idea to keep your Repository outside of your Eclipse Workspace.

There are several reasons for this:

The new Repository will consider the complete folder structure of the Eclipse workspace as (potential) content. This can result in performance issues, for example when calculating the changes before committing (which will scan the complete .metadata folder, for example); more often than not, the workspace will contain dead folders (e.g. deleted projects) which semantically are not relevant for EGit but cannot be excluded easily.

The metadata (.git-) folder will be a child of the Eclipse Workspace. It is unclear whether this might cause unwanted folder traversals by Eclipse.

You can easily destroy your Repository by destroying your Eclipse Workspace.

Creating a new empty Git Repository

You can create a project first and share it afterwards. The Share Project Wizard supports creation of Git repositories (see Adding a project to version control).

You can also create a new empty Git Repository from the Git Repositories View (see Creating a Repository).

Creating a Git Repository for multiple Projects

You may create multiple projects under a common directory and then create a common repository for all projects in one go:

  • create the Eclipse projects (e.g. a, b, c) under a common directory
  • select all projects (a, b, c), and in the contextual menu click Team > Share Project > Git
  • press Next
  • select all projects (a, b, c)
  • the wizard automatically moves up the default repository location to the parent folder since multiple projects have been selected
  • click Create Repository and Finish

Starting from existing Git Repositories

In order to work with the content of a Git repository in the Eclipse workbench, the contained files and folders must be imported as projects. In principle, this import can be done using the generic "New Project" or "Import..." wizards, since the working directory of a Git Repository is just a normal directory in the local file system. However, the newly created projects would still have to be shared manually with Git. The "Import Projects from Git" wizard integrates project import and sharing and also offers some extra convenience.

Starting the import wizard

To start the wizard click Import > Git > Projects from Git.

If you started in a clean workspace, the first page will display an empty list:

Image:Egit-0.9-import-projects-select-repository.png

Before you can continue, you need to add one or several Git repositories to the list. If you already have repositories in the list, this step is optional.

Cloning or adding Repositories

There are two ways to add Git repositories to the list:

  1. Clone a remote repository
  2. Add an existing repository from your local file system

Cloning a Repository

The first option is used if you start with a remote repository. The clone operation will copy that repository to your local file system. To start the Clone Wizard click Clone.... The Clone Wizard is described in more detail in Cloning Remote Repositories. Upon successful completion of the clone operation, the newly cloned repository appears in the list automatically.

Adding a Repository

The second option is useful if you already have a repository in your local file system, for example because you have cloned it earlier, you created it from scratch or you copied it from somewhere else. Click Add...; and select a directory in the local file system. Press Search to trigger a scan for Git repositories contained in this directory. If Git repositories are found, they will be listed and you can select repositories to add:

Image:Egit-0.11-import-projects-add-dialog.png

After successful completion, the repository list should contain some repositories:

Image:Egit-0.11-import-projects-filled-list.png

Selecting a Repository from the List

You can now select a repository and click Next. On the following wizard page, you will decide how to import projects.

Importing projects

This page offers a group with radio buttons that allows you to select a wizard and a directory tree that optionally allows you to select a folder in the working directory.

Image:Egit-0.11-import-projects-select-wizard.png

Wizard for project import

Import Existing Projects

If this radio button is selected, the wizard will scan the local file system for .project files and display the projects found. This is the most comfortable solution and should be used if .project files are checked into the Repository.

Limiting the Scope for Project Import

In this case, the directory tree at the bottom is active. You can limit the search for .project files by selecting a folder in this tree, otherwise the complete working directory of the repository will be scanned. On the next page, a list of the found projects (if any) will be shown. This is very similar to the generic Import Existing Projects wizard, but has some additional filtering capabilities:

Image:Egit-0.9-import-projects-select-projects.png

Use the New Projects Wizard

When this option is chosen, the generic "New Project" wizard will open. After completion of the "New Project" wizard, the "Import Projects from Git" wizard will resume and assist with sharing the projects you just created.

In this case, the directory tree at the bottom is inactive, as the selection is not relevant for the "New Project" wizard.

Import as General Project

This option can be helpful when there are neither .project files available nor a suitable "New Project" wizard. If chosen, the wizard will generate a .project file and point the project to a folder of the Repository's working directory. The result is a "General Project".

By default, the newly generated project will point to the working directory of the Repository. By selecting some folder from the directory tree at the bottom, you can have the project generated for that folder.

Click Next to open a simple dialog for entering a name and a directory for the new project:

Image:Egit-0.9-import-projects-general-project.png

By default the suggested project name matches the name of the directory.

Working with remote Repositories

Cloning Remote Repositories

Using the Git Clone Wizard you may clone remote repositories using different transport protocols.

The wizard can be started from the "Import Projects from Git" wizard using File > Import... > Git > Projects from Git > Next > Clone URI > Next

or from the "Git Repositories View" (described in Managing Repositories) using the Clone a Git Repository toolbar button or view menu.

Repository Selection

On the first page of the wizard enter the location of the remote repository:

Image:Egit-0.9-clone-wizard-url-page.png

  • URI - The complete URI of the remote repository or the path on the file system. This field is automatically synchronized with the other fields. Note that you can use the Local file... button to browse for a local directory and that the URI field offers content assist by offering previously used values
  • Host - The name of the remote host or empty if cloning from the file system.
  • Repository Path - Path to the remote repository or on the file system.
  • Protocol - One of the protocols described below.
  • Port - Port number.
  • User - The user name used for authentication.
  • Password The password used for authentication.
  • Store in Secure Store Whether the password is saved in the Eclipse secure store.

The following protocols are supported:

Note: If you are behind a firewall you may need to configure your proxy settings (Preferences > General > Network Connections). Many HTTP proxies are configured to block URLs containing a username (and/or password) like e.g. http://fred:topsecret@egit.eclipse.org/egit.git hence it's recommended to use the user, password fields at the bottom of the wizard page, the credentials will be transmitted as HTTP headers.

Branch Selection

On the next page choose which branches shall be cloned from the remote repository:

Image:Egit-0.11-clone-wizard-branch-page.png

If you are not sure which branches you need, simply hit "Select All".

You can filter the branches by their name by typing using the text control above the list. Note, however, that branches that have been checked will always be shown in the list, i.e. they will not be filtered.

Local Destination

On the next page define where you want to store the repository on the local file system and define some initial settings.

Image:Egit-0.9-clone-wizard-destination-page.png

  • Directory - The directory which will contain the Git repository. It will be created by the wizard if it does not yet exist.
  • Initial branch - Choose here which local branch will be created and initially checked out.
  • Remote name - Define a name for the remote repository. The default is "origin".

The default root path for storing Git repositories can be configured in the Preference Menu Window > Team > Git > Default Repository Folder You can press Finish on this page or press Next if you are working with Gerrit Code Review and you want to configure your repository accordingly.

Cloning from specific locations

The Clone wizard of EGit can be extended by other plugins in order to search for repositories on specific backends which host git repositories. Currently such an extension is available for Github and soon will be available for Gerrit. For both you need to install the respective Mylyn connectors. The Gerrit Mylyn connector extension then will also configure the remote repository for the work with Gerrit. This can also be done or changed later from the Git Repositories View, see Gerrit Configuration.

When you have installed such an extension, the Clone wizard opens with a selection page where you can choose between different sources of the repository to clone:

Image:Egit-1.3-CloneSources.png

Pushing to other Repositories

Pushing to upstream

If you are working with a local branch which has a so-called "Upstream Configuration", the most convenient way for pushing relies on this upstream configuration.

Typically local branches are created based on a remote tracking branch. Since the remote tracking branch is associated with a remote and the remote contains the information required to access the corresponding remote repository, it is possible to automatically create this upstream configuration while creating the local branch (see Branching for more information).

When pushing upstream from the local branch, push requires no further parameters and hence can be performed without showing another dialog based on the stored upstream configuration.

In order to push upstream, right-click on a project and select Team > Push to upstream or right-click on a Repository in the Repositories View and click Push to upstream. There is also an action available in the Git Command Group. Push will then be executed immediately after selecting the action. Once finished, a confirmation dialog will be shown displaying information about the pushed data and/or error messages:

Image:Egit-0.11-PushResultDialog.png

Configuring upstream push

The upstream push can be configured using the "Configure..." button on the confirmation dialog (see above) or by right-clicking a project and selecting Team > Remote > Configure push to upstream....

A configuration dialog will be shown for configuration of push URIs and corresponding branch mappings (RefSpecs):

Image:Egit-3.1-ConfigurePushToUpstream.png

The dialog is divided into three main sections. In the upper part, information about the currently checked out branch and the remote it's following is shown. Usually local branches are created based on a remote tracking branch which auto-configures that the local branch tracks this remote tracking branch.

In this specific example, there is a warning message that there are several branches that use the remote named "origin". This means that changes in the push configuration will affect all these branches, not just the branch shown in the Branch field. Move your mouse over the warning to display these branches in a tooltip.

The URI Group contains two controls, a URI field and a Push URIs list. If the list is empty, the URI in the URI field will be used for Push, if at least one entry is in the Push URIs list, the URIs in the list will be used instead. It should be noted that if the Push URIs list is empty and the URI is changed in this dialog, the new URI will also be used for Pull, so care should be taken when doing so.

The RefMapping Group allows specification of one or several RefSpecs (see Refspecs) for Push.

"Add" will open a small wizard that helps in the creation of the RefSpecs. You can also paste a RefSpec from the clipboard into the list.

Clicking on the "Advanced" control will show/hide an "Edit (Advanced...)" button that allows for more complex RefSpec editing similar to the Push Wizard below.

The buttons in the lower button bar allow you to save your changes and do the push immediately, save the changes without fetching, dry-run (push without saving the configuration), revert your changes, and Cancel.

Direct Push

Alternatively, you can use Direct Push Support on a Push Specification of a Remote.

Push Wizard

The most powerful (but also most complex) way is using the Push Wizard Team > Remote > Push...

Push URI
  • If you already configured a Push Specification in the Repositories View you may also select it here using the drop-down list under Configured remote repositories. The Finish button will be enabled if the Push Specification for this remote is configured properly (i.e. has at least one URI and a ref spec.
  • Otherwise click Custom URI and enter the URI of the upstream repository you want to push to.

Image:Egit-0.9-push-wizard-destination-page.png

Push Ref Specifications

See also Refspecs for more explanations.

Click Next If this is the first time you connect to this repository via ssh you will have to accept the host key of the remote repository

Image:Egit-0.9-push-wizard-accept-hostkey.png

If your ssh key is protected by a passphrase (which is recommended) you have to enter it here

Image:Egit-0.9-push-wizard-ssh-passphrase.png

Click Add all branches spec

Image:Egit-0.9-push-wizard-refspec-allbranches.png

This is a convenient way to declare that you want to map your local branch names to the same branch names on the upstream repository you want to push changes to.

Click Add all tags spec to map local tags 1:1 to tags in the repository you want to push to.

If you want to map local branches to those in the upstream repository in a different way you may define more detailed mapping specifications in the following way

  • enter source and destination ref or select already existing branches from the drop-down lists
  • click Add Spec

This will transfer the newly defined mapping to the list Specifications for push

Other common push specs:

  • You may e.g. map refs/heads/* to refs/heads/joe/* if you want to name the branches you push to according to your nickname joe. This is useful if multiple users want to publish their local branches on personal branches in a jointly used public repository.
  • Another usual mapping is to map the source ref HEAD to the destination refs/heads/master. This means you want to map your current HEAD (which might currently point e.g. to any local topic branch) to the upstream master branch.
Delete Ref Specifications

To delete a ref in the destination repository select the ref to be deleted from the drop-down list Remote ref to delete and click Add Spec. This will create a corresponding entry in the Specifications for push list. Alternatively you may type in the specification for the refs to be deleted, this may also use wildcards. Pushing Delete Ref Specifications will delete the matching Refs in the destination repository.

Image:Egit-0.9-push-wizard-delete-refspec.png

Conflicting Push Ref Specifications

If you add multiple conflicting Push Ref Specifications they will be marked in red, solve this by removing or editing the conflicting specs. It is also possible to edit the specs in-place in the list Specifications for push

Image:Egit-0.9-push-wizard-refspec-conflict.png

Push Confirmation

Click Next

This will open the Push Confirmation dialog showing a preview which changes will be pushed to the destination repository. If this does not match your expectation click Back and correct your push specs accordingly.

  • For ref updates the range of commits to be pushed will be shown in the format .. e.g. d97f5a2e..adfdbfd2 means all commits between d97f5a2e and adfdbfd2 will be pushed.
  • For refs which do not yet exist in the destination repository [new`` ``branch] or [new`` ``tag] is displayed.
  • For refs which will be delete [deleted] is shown.

Image:Egit-0.9-push-wizard-confirm-push.png

  • Select the Push only if remote refs don't change in the mean time check box if you want to be sure that what you see in this preview is also what you get when pushing these changes out.
  • Select the Show final report dialog only when it differs from this confirmation report check box if you only want to get a report after executing the push if the result differs from this preview.
Push Result Report

Click Finish

Depending on the options you have chosen a push result report dialog is shown. It displays the list of commits which are pushed to the remote.

Image:Egit-3.1-PushConfirmationDialog.png

In the box at the bottom the push confirmation message from the remote server is displayed. In case of any errors you will find the error message from the remote server here. To see the message for a given list entry simply select it in the list.

Click Ok to close the dialog.

Fetching from other Repositories

Fetching from upstream

If you are working with a local branch which has a so-called "Upstream Configuration", the most convenient way for fetching relies on this upstream configuration.

A local branch is typically created based on a remote tracking branch. Since the remote tracking branch is associated with a remote and this remote contains the information required to access the remote repository, it is possible to automatically create this upstream configuration while creating the local branch (see Branching for more information).

When fetching from upstream, this persisted configuration can be used to fetch automatically without the need to provide further parameters in a dialog.

In order to fetch from upstream, click Team > Fetch from upstream on a project or click Fetch from upstream on a Repository in the Repositories View. There is also an action available in the Git Command Group.

Fetch will be executed immediately after selecting the action. Once finished, a confirmation dialog will be shown displaying information about the fetched data and/or error messages:

Image:Egit-3.1-FetchResultDialog.png

Configuring fetch from upstream

The upstream fetch can be configured using the "Configure..." button on the confirmation dialog (see above) or by clicking Team > Remote > Configure fetch from upstream... on a project.

A configuration dialog will be shown for configuring the fetch URI and branch mappings (RefSpecs):

Image:Egit-3.1-ConfigureFetchFromUpstream.png

The dialog is divided into three main sections. In the upper part, information about the currently checked out branch and the remote it's following is shown.

The URI field can be used to add/change the fetch URI.

The RefMapping Group allows specification of one or several RefSpecs (see Refspecs) for Fetch.

The "Add" button will open a small wizard that helps in the creation of the RefSpecs. You can also paste a RefSpec from the clipboard into the list.

Clicking on the "Advanced" control will show/hide an "Edit (Advanced...)" button that allows for more complex RefSpec editing similar to the Fetch Wizard.

The buttons in the lower button bar allow you to save your changes and do the fetch immediately, save the changes without fetching, dry-run (fetch without saving the configuration), revert your changes, and Cancel.

Direct Fetch

Another way for fetching is to use Direct Fetch Support on a Fetch Specification of a Remote.

Fetch Wizard

The most powerful (but also most complex) way is using the Fetch Wizard Team > Fetch...

  • If you already configured a Fetch Specification in the Repositories View you may also select it here using the drop-down list under Configured remote repositories. The Finish button will be enabled if the Fetch Specification for this remote is configured properly (i.e. has at least one URI and a ref spec.

Image:Egit-0.9-fetch-wizard-source-page.png

  • Otherwise click Custom URI and enter the URI of the upstream repository you want to fetch changes from.

Image:Egit-0.9-fetch-wizard-source-url-page.png

Fetch Ref Specifications

See also Refspecs for more explanations.

Click Next Click Add all branches spec

Image:Egit-0.9-fetch-wizard-refspec.png

This is a convenient way to declare that you want to map the branch names in the upstream repository you want to fetch changes from 1:1 to the same local branch names.

  • Click in the edit field Destination Ref and replace the path segment choose_remote_name with a symbolic name for the upstream repository you are going to fetch from.

  • The default remote name for the repository your repository has been cloned from is origin. The master of this remote maps by default from refs/heads/master to refs/remotes/origin/master.

  • If you e.g. want to additionally track branches from Joe's repository in your local repository you would map the branch in his repository refs/heads/* to the following tracking branches refs/remotes/joe/*.

  • Deselect Force Update if you want to allow fast-forward updates only, select this option if you also want to allow non-fast-forward changes.

  • ick Force Update all Refs to set the force update option on all specs

  • ick Remove all specs to remove all specs from the list

  • Click Add all tags spec to map tags tags in the repository you want to fetch from 1:1 to local tags.

If you want to map branches or tags in the upstream repository to local branches in a different way you may define more detailed mapping specifications in the following way

  • enter source (ref in source repository) and destination ref (tracking branch or tag in local repository) or select already existing branches from the drop-down lists
  • click Add Spec

This will transfer the newly defined mapping to the list Specifications for fetch

Fetch Result Report

Click Finish

Image:Egit-3.1-FetchWizardResult.png

A fetch result dialog is shown.

  • For ref updates the list commits which have been fetched will be shown.
  • For refs which didn't exist before in the local repository [new`` ``branch] or [new`` ``tag] is displayed.
  • For refs which have been deleted [deleted] is shown.

Pulling New Changes from Upstream Branch

  • Right-click on a project in the Package Explorer and select Team > Pull or right-click on a repository in the Git Repositories view and select Pull to pull new changes from the upstream branch your local branch is tracking. This also works if resources are selected from more than one repository.
  • Whenever you create a local branch based on a remote tracking branch EGit can configure a tracking relationship so that subsequent pulls will fetch and then merge or rebase (depending on the configuration of this tracking relationship) the changes from the tracked upstream branch; see Branching for details.

Ad-hoc selection of the upstream branch to pull from is not yet supported by EGit.

Available alternatives include:

  • run git pull from outside eclipse (but beware on Windows)
  • if you did no local change or want to discard your local changes, use Team > Reset...

Working with Gerrit

If you are working with Gerrit Code Review, EGit allows you to conveniently push and fetch changes to and from the Gerrit servers.

Enabling Gerrit for a repository

When a repository is cloned in EGit from a Gerrit server using a http, https, or ssh URI, EGit will automatically set up the clone for use with Gerrit. The repository clone is configured such that

  • fetching also fetches the review notes from Gerrit,
  • pushing by default pushes the commits for review, and
  • commit messages automatically get a Gerrit Change-Id unless they already have one.

If a repository cloned from a Gerrit server outside of EGit is used in EGit, the clone may not be set up such that EGit recognizes it as a Gerrit repository. Gerrit operations in EGit will not appear in any menus unless you configure your repository first. To do that, open the Git Repositories view and browse down to the Remote that represents the Git repository server you want to use and select Gerrit Configuration....

Pushing a change to a Gerrit Code Review Server

Right-click on a project and select Team > Remote > Push to Gerrit... or right-click on a Repository node in the Repositories View and select Push to Gerrit...

A dialog will appear that lets you select or enter a URI and branch name:

Image:Egit-4.4-PushChangeToGerritDialog.png

  • In the URI combo, select or enter the URI that points to your Gerrit instance; the combo will be pre-filled with all URIs defined in any remote of your current Repository; in addition you can type any URI into this field
  • In the Gerrit Branch field, enter the name of the branch to select the review queue your changes will be be pushed to
  • Optionally, enable the topic and enter a topic identifier. EGit proposes the last used topic for the local branch being pushed, or the local branch name.

The dialog also offers a content assist for the Gerrit branch. Simply press "Ctrl+Space" to activate this (consult the tooltip that appears when hovering over the little bulb decorator near the Gerrit Branch field). The remote tracking branches for the current repository will be shown. Note that this content assist is filtered, so in order to see all proposals, you need to make sure to have the Gerrit Branch field empty before requesting the content assist.

Upon clicking Finish, the currently checked out commit will be pushed to the Gerrit branch specified. Also, the URI and Gerrit Branch values will be remembered and suggested again when the dialog is opened again later.

This allows for more flexibility when working with different Gerrit branches in parallel (e.g. frequently switching between development and hotfixing).

Pushing as Draft

The "refs/for" in the "Push to Gerrit" wizard is a combo drop-down box; click it and select "refs/drafts" instead of "refs/for" to push a draft change to Gerrit.

Editing a change

When a change has been pushed to Gerrit and the reviewers suggest to make some improvements, a new patch set for the change has to be uploaded. First, edit the commit(s):

  • In case you have one commit corresponding to one change, you can amend the commit (see Amending Commits).
  • In case you have multiple dependent commits and need to edit a commit other than the last one, you can do an interactive rebase (see Interactive Rebase). Alternatively, check out the commit you want to edit, amend it and then cherry-pick the later commits on top (this is what interactive rebase does for you).

Then push again to the same branch. Gerrit will detect that you are updating existing changes and will add new patch sets.

Fetching a change from a Gerrit Code Review Server

Right-click on a project and select Team > Remote > Fetch from Gerrit... or right-click on a Repository node in the Repositories View and select Fetch from Gerrit...

A dialog will appear that lets you select or enter a URI and a change as well as some additional options:

Image:Egit-3.1-FetchChangeFromGerritDialog.png

  • In the URI combo, select or enter the URI that points to your Gerrit instance; the combo will be pre-filled with all URIs defined in any remote of your current Repository; in addition you can type any URI into this field
  • In the Change field, you must enter the full name of a change; you can either take this value from the Gerrit Web UI, use the content assist described below, or build the name using the following pattern: "refs/changes/" + (last two digits from change number) + / + (change number) + / + (revision number)
  • In the "Actions to perform after fetch" you can decide what to do after the change has been fetched; you can either create and checkout a branch pointing to the change, create and checkout a tag pointing to the change, or simply checkout the change (thus making HEAD detached); the last option does nothing after fetch, but you will be able to find the commit pertaining to the change at FETCH_HEAD (go to the Repositories View and find FETCH_HEAD under the References node of your Repository, see Inspecting References). The name for the branch or tag is suggested by the dialog but can be overwritten as needed. Since deletion of tags is currently not supported in EGit, we suggest to use local branches rather than tags for the time being. Since the Repositories view allows to group branches hierarchically using "/" as hierarchy separator, the suggested names can come in very handy when dealing with large numbers of changes.

Instead of the tedious copy-paste or manual entering of the change ID, the dialog also offers a content assist for the change. Simply press "Ctrl+Space" to activate this (consult the tooltip that appears when hovering over the little bulb decorator near the Change field). The Gerrit Server will be contacted and all available changes will be fetched and shown in a content assist dialog:

Image:Egit-0.11-ContentAssistGerritChange.png

The list will be filtered with your input in the change field. After selecting the change in the content assist, the Change field will be filled with the correct information.

You can also copy the download command from the Gerrit WebUI to the clipboard before opening the Fetch from Gerrit... wizard. This will automatically populate the dialog with the values needed to fetch this change.

Image:Egit-3.1-GerritDownloadCommand.png

The Change field is also automatically filled in (and content assist is triggered) if the clipboard contains a web URL pointing to a Gerrit change, or the change number part of such a URL (numbers separated by "/"), or a plain change number.

Working with Gitflow

If you are using Gitflow (http://nvie.com/posts/a-successful-git-branching-model/), EGit allows you to work with Gitflow operations, managing feature, release and hotfix branches. Install the feature "Git integration for Eclipse - Gitflow support" in order to install EGit's Gitflow integration.

Enabling Gitflow for a repository

Gitflow operations will not appear unless the selected repository is configured for Gitflow. To do that, open the context menu on a repository in the Git Repositories view and select Init Git Flow. File:Egit-4.0-git_flow_init_repository_node_right_click.png

You can skip this step if your repository was already configured for Gitflow by another client.

Starting a feature/release/hotfix

Right-click on a repository, select Git Flow, and select the appropriate start command.

File:Egit-4.0-git flow-repository node right click.png File:Egit-4.0-git flow submenu-repository node right click.png

A dialog will appear that lets you enter a name for the Gitflow branch, adding the correct prefix automatically.

Starting release from a commit other than HEAD

Go to the EGit History view, and right-click the commit you want to start the release from. In the context menu, go to Git Flow, and select Start release from commit . File:Egit-4.0-git_flow_start_release_from_history_view_context_menu.png

Inspecting the state of the Repository

Label Decorations

Label decorations show Git-specific information about resources under Git version control. They appear in all views showing model objects, like Package Explorer, Project Explorer, Navigator, and Hierarchy View.

The Git label decorations can be switched on globally in the Preference Menu (Window > Preferences) under General > Appearance > Label Decorations, and more detailed settings can be modified in Preferences under Window > Preferences > Team > Git > Label Decorations.

There are two different types of label decorations: text decorations and icon decorations.

Text Decorations

Text decorations appear on the left or right side of the text label. They can be configured on the Preferences dialog under Team > Git > Label Decorations on the Text Decorations tab. For example, the default for a dirty resource is a > on the left side of its name.

These are the default settings:

Image:01-TextDecorations.png

For files and folders there are the variables "name", "dirty" and "staged". "Dirty" and "staged" are flags; if they are true, the text after the colon is displayed.

For projects there are the additional variables "repository", "branch" and "branch_status". The "repository" variable displays the name of the repository.

The "branch" variable displays the name of the currently checked out branch. If no branch is checked out, the decoration shows the shortened name of the commit (first seven characters followed by ellipsis). If tags and/or remote branches are pointing to this commit, a "best guess" heuristic is applied to also show this information: tags take precedence over remote branches, and if several tags apply, the newest one is displayed. If there are several remote branches or tags that have no modification date, then alphabetic sorting is applied and the last one is shown. Example: the checked out commit e49f576... refers to tag v.0.7.1 of repository egit: Image:03-ExampleDecoration.png

The "branch_status" variable shows the status of the local branch compared to the remote-tracking branch that is set as upstream:

  • ↑N – The local branch has N commits that are not yet on the remote-tracking branch. This can be read as "N commits to push".
  • ↓M – The remote-tracking branch has M commits that are not on the local branch. This can be read as "M commits to merge/rebase".
  • ↑N↓M – The local branch and the remote-tracking branch have diverged (the two above apply both).
  • – Empty if the local branch and the remote-tracking branch have the same state.

The status variable can be used with a leading space like this: { branch_status}. This results in the space being added only when the status is not empty.

Icon Decorations

Icon decorations appear on the lower right corner of the icon displayed in front of the label. They can be configured on the Preferences dialog under Team > Git > Label Decorations on the tab Icon Decorations.

These are the default decorations:

Image:02-IconDecorations.png

  • dirty (folder) - At least one file below the folder is dirty; that means that it has changes in the working tree that are neither in the index nor in the repository.
  • tracked - The resource is known to the Git repository and hence under version control.
  • untracked - The resource is not known to the Git repository and will not be version controlled until it is explicitly added.
  • ignored - The resource is ignored by the Git team provider. The preference settings under Team > Ignored Resources, "derived" flag and settings from .gitignore files are taken into account.
  • dirty - The resource has changes in the working tree that are neither in the index nor in the repository.
  • staged - The resource has changes which have been added to the index. Note that adding changes to the index is currently possible only in the commit dialog via the context menu of a resource.
  • partially-staged - The resource has changes which are added to the index and additional changes in the working tree that neither reached the index nor have been committed to the repository. See partial staging from the Git Staging view for how to do that.
  • added - The resource has not yet reached any commit in the repository but has been freshly added to the Git repository in order to be tracked in future.
  • removed - The resource is staged for removal from the Git repository.
  • conflict - A merge conflict exists for the file.
  • assume-valid - The resource has the "assume unchanged" flag. This means that Git stops checking the working tree files for possible modifications, so you need to manually unset the bit to tell Git when you change the working tree file. Also see Assume unchanged action.

Commit Dialog

A summary of the status of all modified tracked files is displayed on the commit dialog. By double clicking a file the changes to be committed will be displayed in a compare dialog. As EGit currently always commits the content of the working tree (corresponding to git commit -a on the command line) the compare dialog will compare the working tree with the last commit.

Comparing Content

In daily work you will often want to see the changes between your last commit, the index, and the current working tree. In order to do so, select a Resource (project, folder, or file) in the project explorer or navigator and right-click an action under Compare With.

To analyze the contents of a specific commit you should use the History View which supports this task much better, see task Inspecting Commits.

Compare editor and Synchronize View

If you use any of the submenu actions of Compare With on a single file, a compare editor will be shown, otherwise (since EGit 3.1) the Synchronize View will be opened that lets you browse the changes; by double-clicking on a changed file in this view, a compare editor will be opened for this file. In the toolbar of the Synchronize View you can select the Sychronize Model you want to use for presenting the changes you are inspecting.

Image:Egit-3.1-SynchronizeSwitchModel.png

Compare working tree with last commit

The difference between a resource in the current working directory and in the last commit in the current branch can be viewed from the context menu Compare With > HEAD revision. This feature is also available in the Commit dialog. Double clicking on an entry in the Commit dialog opens a compare dialog.

Comparing Working Tree with Index

The differences between the current working tree and the index (based on the currently selected resource) can be viewed from the context menu Compare With > Git Index.

Comparing Working Tree with a branch, a tag or a reference

  • Select a resource
  • right-click Compare With > Branch, Tag, or Reference...
  • select a branch, tag or reference

Comparing Working Tree with Any Commit

From the project explorer
  • Select a resource
  • right-click Compare With > Commit...
  • select a commit from the commit graph
From the history view (files only)
  • Select a file in the package explorer
  • right-click Team > Show in History or Compare With > History...
  • in the commit graph select a commit
  • from the context menu select Compare with working tree
  • this will open a compare dialog showing the changes between the selected commit and the current working tree

Comparing Two Commits

  • Select a resource in the Package Explorer
  • click Team > Show in History or Compare With > History... (the latter for files only)
  • in the commit graph select two commits
  • right-click Compare with each other
  • this will open a compare dialog showing the changes between the two selected commits
  • you can also open a Git Tree Compare view by right-clicking Compare with each other in Tree

Comparing Index with HEAD or Any Other Commit

You can compare Index with HEAD using the Staging View. Double click a file displayed in the "Staged Changes" pane to compare its Index version against the HEAD version. Comparison between Index and another commit isn't implemented yet.

Comparing with Branches (Synchronize)

The difference between the working tree (including not committed changes) and a branch or tag can be viewed (since EGit 3.1) by selecting the project(s) you want to compare and clicking Compare With > Branch, Tag or Reference. The result is filtered for the resources you selected before starting the comparison.

You can also compare with a branch by clicking the dynamic menu Team > Synchronize on a project and selecting the Ref you want to synchronize your working tree against. If the Git repository contains multiple Eclipse projects it is sufficient to select one project, the Synchronization View will also include all other projects.

Image:Egit-1.0-synchronize-dynamic.png

If you want to synchronize with a Ref not listed in the dynamic menu click Team > Synchronize > Other.... Then in the Synchronize Wizard click into the destination column of the repository you want to synchronize and select the Ref you want to compare against.

Image:Egit-1.0-synchronize-custom.png

When clicking "Include local uncommitted changes in comparison" also local, not yet staged changes and the already staged changes will be shown in comparison.

It is also possible to compare multiple repositories at once. In this case in the Synchronize Wizard select for each repository the Ref you want to compare against.

Quickdiff

Instead of using a compare editor you can enable quick diff support and see the changes within the text editor. This feature can be enabled via the General > Editors > Text Editors > Quick Diff preference page:

Image:04-QuickDiffPreferences.png

The difference annotation will then be displayed on the left hand side of the editor:

Image:05-QuickDiffInEditor.png

If you move your mouse over the annotation you see the content of the version you are comparing to:

Image:06-QuickDiffInEditorPopup.png

Per default, the comparison is against the HEAD. You can determine the version you are comparing to, the so-called quickdiff baseline, from the context menu of a commit in the history view (Show in > History). There are three menu entries:

  • Quick Diff -> Reset baseline to first parent of HEAD - Compare against the first commit before HEAD.
  • Quick Diff -> Reset baseline to HEAD - Compare against HEAD.
  • Quick Diff -> Set as baseline - Compare against the selected commit

Inspecting Commits

To inspect a given commit

  • from the context menu in package explorer select Team > Show in History
  • select the commit you want to inspect

Image:Egit-3.1-ViewDiffInHistory.png

View Diff for a Commit

The history view displays the diff in the lower left pane. Selecting a file in the lower right pane shows the diff for this file.

Showing the contents of a Commit

The behavior of a double click on a file in the lower right pane depends on the state of the compare mode toggle button. If it's on, a compare editor will be opened which compares the file content in the current commit with the content in the ancestor commit; if it's off, an editor will be opened showing the file content in the current commit.

Committing Changes

Modifications to a project under git version control are persisted in the git history through commits. Starting from the state checked out from the git repository modify your project until you have reached a state you are satisfied with and then commit all these changes into the repository as one single commit. Each commit represents a well defined snapshot of all the files stored in the repository.

Modifying the content

To modify a project which is already shared with Git modify or delete files either within Eclipse or directly in the file system. There is no need to tell Git in advance about these operations. New files which should be version-controlled have to be explicitly put under Git version control :

  • click Team > Add in the file's context menu

Alternatively you may display untracked files in the Commit dialog and check the Show untracked Files checkbox to select them for inclusion into the commit.

Label decorators, e.g. in the Package Explorer View, show :

  • untracked files which are not yet under git version control (marked with "?")
  • files which have been added (marked with "+")
  • modified files (marked with ">" in front of the filename)

For details see Label Decorations.

Here is an example in the Package Explorer for :

  • a committed file
  • a file modified in the working tree but not yet staged for the next commit
  • a modified file which modifications have been staged for the next commit
  • a file which has been newly staged for first-time inclusion with the next commit
  • a file which is not under git version control

Image:Egit-0.9-label-decorators.png

Committing

There are two ways to commit changes with EGit:

  • using the Staging View, or
  • using the Commit Dialog.

The Commit Dialog is considered deprecated and may be removed in future versions. Since EGit 4.4, the Team > Commit... context menu action by default opens the staging view instead of the commit dialog.

This behavior is, for the time being, configurable in the global Preferences > Team > Git > Committing preferences.

Image:Egit-4.5-CommittingPreferences.png

If "Use Staging View to commit instead of Commit Dialog" is checked (the default setting), the Team > Commit... action will open the staging view. If it's unchecked, the commit dialog will be opened.

If the staging view is used an additional option "Automatically stage selected resources on commit" available since EGit 4.5 determines whether selected files should be automatically staged when Team > Commit... is invoked. This will stage all changes contained in the selected resources. It makes the behavior a bit more consistent with the way the commit dialog works: in the commit dialog, individual files can be checked or unchecked for inclusion in the commit, and selected files are checked by default. In the staging view, you compose your commit by staging changes, and only staged changes will be committed. Auto-staging thus includes the selected files automatically in the commit when the staging view is used.

The "Include selected untracked files" option determines whether selected files that are not yet in the git repository at all are included in the commit (checked in the commit dialog, or auto-staged in the staging view if auto-staging is on).

Committing with the Staging View

The preferred way to create commits with EGit is the Staging View since it always shows the current git status for the selected repository and allows to stage (add to git index) and unstage (remove from git index) modified files. Double click a file in the Unstaged Changes pane to compare it against the git index, double click a file in the Staged Changes pane to compare it's index version against HEAD. In the Staging View you can edit the commit message incrementally since it's a view and not a modal editor.

Image:Egit-3.1-StagingView.png

Committing using Commit Dialog

To commit a change click Team > Commit... in the context menu of a resource in the project.

Git tracks all changes made to the entire repository capturing the modifications of all version-controlled files in that repository not regarding if these files reside in the same Eclipse project or not.

Once you have triggered the commit the Commit Dialog will pop-up

Image:Egit-0.9-commit-dialog.png

Select the changes you want to commit, enter the commit message and to create the commit, press Ctrl+Enter (Command+Enter on Mac OS X) in the commit message text field, or click Commit.

Commit Message

In the Staging View or Commit Dialog you specify the commit message describing the change.

It is good practice to start the message with a short first line summarizing the change followed by a blank line and then the message body. In order to ensure that also git command line tools can format these messages nicely the lines shouldn't be formatted too wide (this is indicated by a grey vertical line).

Image:Egit-0.9-commit-dialog-spell-quickfix.png

The commit message text is checked for errors by the Eclipse spell checker. The spell checker can be configured via the Eclipse Preferences > General > Editors > Text Editors > Spelling. Press Ctrl+1 to open quick fixes which may help to fix the spelling errors.

Image:Egit-1.2-commit-dialog-path-assist.png

The commit message editor supports content assist for file names shown in Files section of the commit dialog, which can be activated pressing Ctrl+Space.

Footer Tags In the last paragraph of the commit message (i.e. after the last blank line), optional footer tags may follow:

Bug: 3176
Change-Id: I267b97ecccb5251cec54cec90207e075ab50503e
Reported-by: Joe Developer <joe@dev.org>
Signed-off-by: William Shakespeare <will.from@the.past>

The semantics of these tags are project or tool specific

  • If there is an entry in a bug tracking system for the change to be committed it is a good idea to add it here as a bug tag
  • Gerrit Code Review uses the Change-Id: footer to correlate different patchsets of a change evolving during the review process towards the finally accepted patch. To generate a Gerrit Change-Id click Compute Change-Id for Gerrit Code Review; the ID will be generated on commit, until then a null Change-Id is shown as a placeholder. With the EGit configuration parameter gerrit.createchangeid set to true the corresponding checkbox in the Commit Dialog is always preselected. This parameter can be set on repository level, on system level or on user level. See Repository Configuration for more information.
  • The Signed-off-by: footer is used by many projects to create a formal track record of declarations that the signing author contributed the changes under the project's license and IP rules. This way the IP provenance of a project's evolving code base can be captured on a technical level. See e.g. the Developer Certificate Of Origin used by the Linux kernel project. If the EGit preference Insert Signed-off-by in Team > Git > Commit Dialog is set the corresponding checkbox in the Commit Dialog is always preselected.

Selecting changes to commit

  • When you click Commit in the Staging View only staged changes will be committed. The native git command line works in the same way. All unstaged changes will stay untouched and remain in your working directory. This feature is often used to separate modifications done to a set of files into different commits.
  • When you click Commit in the Commit Dialog you can use the checkbox in front of each file to decide if you want to include its changes into the new commit. If you clear the checkbox in front of a file, the changes to this file will not be included in the commit. The local file in your eclipse workspace will still contain the modifications giving you the chance to commit these changes with a subsequent commit.

One example: Imagine since the last commit you have fixed a bug in A.java and you have added a new method to B.java. These two modifications are logically independent from each other hence you may want to commit them in two independent commits. In this case you initate the commit, deselect B.java from the set of committed files and specify a commit message describing only the bugfix in A.java. After a successful first commit you just call commit again and the upcoming dialog will present you the remaining changes in B.java. Now you specify a commit message describing the addition of the method and finish the second commit.

In the Commit Dialog new files you added to the project which have not been explicitly added to version control (see "Modifying the content") will be listed in the commit dialog if you select the checkbox "Show untracked Files". If you select the checkbox in front of these files in the list they will be added to the repository and committed once you press the commit button. Files which are excluded by a .gitignore file will not be shown here. If you have no other changes in your repository than such untracked files the checkbox Show untracked Files is selected by default.

Amending Commits

If you recognize that you missed something when committing a change you may fix this: open the staging view or commit dialog again and specify that the current commit shall "amend" the previous commit in the current branch. The new commit will then replace the previous one. This feature is often used to correct incorrect commits before they are published to other repositories.

Note: do not amend commits if they have already been published to a shared repository since this may disturb others if they already based their changes on the published change.

Amend example: Imagine you have committed a change to a file containing a typo

Image:EGit-Typo.png

After committing the change you detect a typo. In order to correct this typo and the corresponding commit you just fix the typo in the source file

Image:EGit-Corrected.png

Then open the Staging View or Commit Dialog again and select the Amend Previous Commit icon in the toolbar.

Image:EGit Amend Commit Button.png

The commit message of your previous commit (the one you want to replace) is then filled into the "Commit Message" field. This gives you the chance not only to correct errors in the content of the version-controlled files but to also correct errors (e.g. typos) in the commit message describing your change.

As an alternative to amending you could just commit the corrected version as a subsequent commit. But the first commit containing the typo is of no use to anybody and in order not to clutter the history of your project with unneeded commits you should amend the commit.

Be aware that amending commits which are already published to other repositories may cause trouble. Once you have pushed a commit to a remote repository or your local repository was cloned by somebody else, you should be very careful with amending commits. In this case publishing a second commit which corrects the first one is probably a better solution. Otherwise inform all others that you amended a published commit so that they can react accordingly.

Reverting Changes

Reverting changes in the working tree

Replace with File in Git Index

Changes which are not yet committed and not yet staged can be reverted for a set of selected files. Select the file(s) in the Package Explorer or an analogous view and click Replace With > File in Git Index.

Replace with HEAD

Click Replace With > HEAD to replace the selected files with their HEAD version. You can also use Reset to with option hard to forcefully reset the entire working tree of your repository back to the state of the HEAD commit (See "Resetting your current HEAD" below). This operation will revert all changes in the working tree and the index.

Replace with Branch, Tag or Reference

Click Replace With > Branch, Tag or Reference to replace the selected files with their version corresponding to a branch, tag or reference.

Replace with Commit

Click Replace With > Commit to replace the selected files with their version corresponding to a selected commit.

Replace with Previous Revision

Changes that are already staged or even committed can be "reverted" by replacing them with a version from the previous commit. Select a single resource in the Package Explorer or an analogous view and click Replace With > Previous Revision. The repository will determine the last commit that modified the selected resource and offer to replace the workspace resource with the contents of this commit.

This is mainly intended for "removing" single files from a commit (when committing the reverted workspace resources, they are effectively removed from the current commit). Even though this also works on folders and projects, the results of replacing a folder or project with a "previous revision" may be unexpected.

Revert using quickdiff

The quickdiff feature can be used to revert individual changes to a file. You can revert by line, block (se range of changes lines) or selection. Select all text and then Revert selection to revert a whole file.

Reverting changes introduced by a specific commit

Changes which are introduced by a given commit can be reverted by an automatically created new commit on top of the currently checked out commit. The commit which is to be reverted does not have to be checked out for that.

Select the commit in the History View, open the context menu and select Revert Commit. This reverts the changes that the selected commit introduces by creating a new commit on top of the currently checked out commit.

Resetting your current HEAD

Git offers the possibility to reset the HEAD of the current branch to any other commit. It optionally resets the index and the working tree to match that commit. Note that this action affects all files and folders in the entire repository.

You have the option to do a hard reset, a mixed reset and a soft reset.

  • soft - the HEAD points now to the new commit, the index and the working tree are unchanged
  • mixed - the HEAD points now to the new commit, the index is updated, the working tree is unchanged
  • hard - the HEAD points now to the new commit, the index and the working tree are updated

Reset to specific branch or tag

Select Team -> Reset... on a project. This opens a dialog where you can select a branch or a tag.

Reset to a specific commit

Select a commit in the History view and open the context menu. Here you find the entries Hard reset, Mixed reset and Soft reset.

Revert all local and staged changes

This can be done using a hard reset. If you reset to the current HEAD (normally the last commit on your branch) with the option hard you reset the currently checked out branch to this commit and overwrite the working tree and the index with the content of HEAD. You can do this in three ways:

  • Select Team > Reset... on a project. In the dialog select HEAD or your current branch and switch the radio button to hard.
  • Right click and select Reset... on any branch or tag in the Repositories view. This opens a dialog which lets you decide on the reset type. Choose hard here.
  • Open the context menu on the HEAD commit in the history view and select Hard Reset.

Branching

General remarks about branches

Committing changes to a local repository is impractical without using a local branch (see concepts section above). Furthermore, by using several different branches, it is possible to work on different changes in parallel by switching among these branches.

Thus, before starting to change the local repository, the first step is typically to create a local branch. Local branches are "based upon" either a commit or a remote tracking branch.

The second option is recommended when working with remote repositories, as it simplifies the task of synchronizing the local changes with the remote ones by adding so-called "upstream configuration" to the new local branch.

See Branch Creation dialog for more details.

Upstream configuration

Each local branch which is based on a local tracking branch can have some additional configuration indicating the remote repository, the remote branch, and the so-called pull strategy. See Branch Creation dialog for more details.

Typically, this configuration is created automatically when creating the local branch based on a remote tracking branch. However, it can be displayed and edited in the repository configuration or by clicking Show In > Properties on a branch in the Repositories View.

Checking out an existing Branch

From the team menu on a project node

  • Select Team > Switch To... and select a branch name from the list

If there are too many branches the list does not show all of them. In this case

  • Select Team > Switch To... > Other...
  • On the dialog, select a branch, a tag or a Reference
  • Click Ok

From the Git Repositories View

  • click Checkout on a branch node
  • or double click a branch node

From the History View

  • Click Checkout on a commit which has a branch label
  • If more than one branch point to the commit a dialog will let you decide which branch to check out.

Creating a New Local Branch

This is always done with the Branch Creation dialog. The newly created branch can optionally be checked out by selecting a check box on the dialog.

From the team menu

  • Select Team > Switch To... > New Branch....
  • On the dialog, select a branch, a tag or a Reference.
  • Click Create Branch....
  • The Branch Creation dialog will be opened.

From the Repositories View

  • Select Create Branch... on the "Branches" node or on any "Branch", "Tag" or "References" node.
  • The Branch Creation dialog will be opened.

From the History View

Renaming an Existing Branch

From the Team menu on a Project node

  • Select Team > Advanced > Rename Branch...
  • On the branch selection dialog, select the branch to rename
  • Enter the new branch name and click OK

From the Repositories View

  • Open the Git Repositories View
  • Select Rename Branch... or press F2 on the branch you want to rename
  • Enter the new branch name and click OK

From the History View

  • Select Rename Branch... on a commit with a branch label
  • Enter the new branch name and click Ok

Deleting a Branch

All the actions below show the same behavior with respect to the following:

  • The currently checked out branch can not be deleted
  • If deletion of the branch may result in data loss, a warning is displayed that must be confirmed
    • EGit assumes a potential data loss if the branch points to a commit that is not reachable from the currently checked out commit

From the Team Menu on a Project node

  • Select Team > Advanced > Delete Branch...
  • Select the branch to delete from the dialog being displayed and press Ok

From the Repositories View

  • Open the Git Repositories View
  • Select Delete Branch on the branch you want to delete

From the History View

  • Select Delete Branch on a commit with a branch label
  • If multiple branches point to the commit, a selection dialog will be shown on which you can select the branches to delete

Branch Creation Dialog

There are several actions available to create a local branch. All these actions use the Branch Creation dialog:

Image:Egit-3.5-CreateBranchDialog.png

Enter the name of the local branch you want to create. If a source branch is selected which is a remote tracking branch EGit will suggest to create the new local branch with the same name.

Click Select... to select the source branch the new branch shall be based on. Typically, this is a remote tracking branch, but it could be any branch or commit in the repository (selecting a local branch is not recommended if you are working with a remote repository). If you want to base the new branch on a commit no branch is referring to then click Create Branch... from the commit shown in the History View.

When a source branch is selected you can configure the "upstream configuration" of the new branch which is helpful when fetching and pushing, but particularly when pulling. Depending on the selected option the following configuration can be chosen:

  • "Merge upstream commits into local branch": When pulling, the changes will be fetched from upstream and the remote tracking branch will be updated. Then the current local branch will be merged with the new changes. This is the default if the new branch is based on a remote tracking branch (but this default may be overridden by specific repository configuration)
  • "Rebase commits of local branch onto upstream": When pulling, new changes will be fetched from upstream and the remote tracking branch will be updated. Then the current local branch will be rebased onto the updated remote tracking branch
  • if you uncheck the option "Configure upstream for push and pull"): When pulling, no specific upstream configuration will be done for the new branch; however, if a default remote exists (a remote with name "origin", pull will try to use the configuration of this remote; this is the default if the new branch is not based on a remote tracking branch

You may view and edit the upstream configuration in the repository configuration or by selecting Show In > Properties on a branch in the Repositories View.

EGit also supports the git configuration parameter branch.autosetuprebase, set it to always if you want to use the rebase pull strategy by default. If you set this in the repository configuration this is used for all local branches created based on a remote tracking branch in this repository, if you set it in your user configuration it will be used for all your repositories.

In the lower part, you can decide whether the new branch shall be checked out immediately.

Configure Branch Dialog

Image:Egit-3.5-ConfigureBranchDialog.png

Click Configure Branch... on a branch in the Repositories View in order to change the upstream configuration of a local branch. Select which remote ("." means the local repository) and branch the selected local branch should track. Check "Rebase" if you want pull to rebase the local branch onto new changes arriving for the tracked branch, otherwise pull will merge new changes arriving for the tracked branch.

Merging

A merge incorporates changes from another branch or tag, since the time their histories diverged from the current branch, into the currently checked out branch.

Merging a branch or a tag into the current branch

You can trigger merge from:

  • the History View
  • the Team menu
  • the Git Repositories View

Starting merge from the History View

This is the recommended view to start a merge since it shows you the history of your repository. Ensure that the toggle buttons Show all changes in repository and Show all Branches and Tags are selected in the History View's toolbar. This ensures that you see the complete history of your repository in order to decide which branch you want to merge. Select the commit with the branch or tag label you want to merge and click Merge.

Starting merge from the Team menu

In the Package Explorer or Navigator, open the context menu on a project node. Select Team > Merge...

Now the merge dialog opens:

Image:Egit-3.1-MergeDialog.png

On the dialog, select a branch or a tag you want to merge with your current branch. This dialog also allows you to select merge squash and fast-forward options.

Starting merge from the Git Repositories View

You can trigger a merge from any branch and tag node and from the repository node if you have checked out a local branch. See Merging a Branch or a Tag for further details.

Merge options

The following fast-forward configuration options for merge are recognized by EGit, which are used for all branches:

[merge]
    ff = true|false|only

When you only want to configure it for a certain branch, use the following:

[branch "name"]
    mergeoptions = --ff|--no-ff|--ff-only

fast-forward options ff = true or mergeoptions = --ff : When the merge resolves as a fast-forward, only update the branch pointer, without creating a merge commit. This is the default behavior.

ff = false or mergeoptions = --no-ff : Create a merge commit even when the merge resolves as a fast-forward.

ff = only or mergeoptions = --ff-only : Refuse to merge and abort the merge operation unless the current HEAD is already up-to-date or the merge can be resolved as a fast-forward.

When you start merge from the Team menu "Team > Merge..." you can set the fast-forward, squash or no-commit merge options in the merge dialog:

Image:Egit-3.4-merge-options.png

Possible merge results

After pressing the Merge button, the following scenarios can occur:

  • Already up to date: Your current branch points to a commit that has the selected branch or tag as predecessor. In this case nothing is changed.
  • Fast-forward: Your current branch points to a commit that is a predecessor of the selected branch or tag. In this case your branch is moved and points to the selected branch or tag; this new HEAD is checked out to the working tree. Fast-forward is very common when working with remote repositories: When a remote tracking branch is updated, the merge with the corresponding branch generally is a fast-forward. You can perform a pull by fetching the remote branch (e.g. origin/master) and merging it into the corresponding local branch (e.g. master).
  • Real merge: When neither of the conditions above apply egit triggers a merge of the commits. There are two possible outcomes: If no conflicts occur the current branch will point to a newly created merge commit; if conflicts occur the conflicting files will be marked with label decorators (see Resolving a merge conflict for further actions in case of merge conflicts).
Merge Result dialog

The result of a merge is summarized in a dialog:

Image:Egit-3.1-MergeResultDialog.png

On the first line you see the result of the merge. The possible results are "Already-up-to-date", "Fast-forward", "Merged", "Conflicting" or "Failed". A possible reason for "Failed" may be that there are conflicting changes in the working directory.

On the second line you see the new HEAD commit in case of a successful merge (Already-up-to-date, Fast-forward or Merged).

In the table you see the commits which were merged.

Resolving a merge conflict

A merge can result in conflicts which require user action. This is the case when the content of files cannot be merged automatically. These conflicts are marked with a label decoration in the Staging View. Using the Staging View to find the files with conflicts in order to resolve them is handy since the Staging View shows only modified files so that you don't have to wade through all of your resources but only those which might need your attention for resolving the conflicts.

Image:Egit-3.1-StagingViewConflicts.png

Also the conflicting resources are decorated in the navigation trees like Project Explorer or Package Explorer views

Image:Egit-0.10-merge-conflict.png

The merge conflicts in the content of files are presented with textual conflict markers (see http://www.kernel.org/pub/software/scm/git/docs/git-merge.html#_how_conflicts_are_presented for more details).

Using Merge Tool

  • select the top level resource showing the red conflict label decorator
  • click Team > Merge Tool
  • select the merge mode Use HEAD (the last local version) of conflicting files and click OK

Image:Egit-0.10-select-merge-mode.png

  • the merge editor opens showing the working tree version in the left pane and the version to be merged in the right pane

Image:Egit-0.10-merge-tool.png

  • edit the working tree version until you are happy with it
  • Team > Add the merged resource to mark the conflict as resolved
  • commit the merge commit via Team > Commit

Manual conflict resolution

To resolve a conflict you have to do the following steps:

  • Navigate to the conflicting resource
  • Edit the content of the conflicting resource
  • Tell EGit that the conflict is resolved with Team > Add
  • Commit the conflict resolution with Team > Commit

Finding conflicting files

A repository which contains conflicting files has the textual label decorator "|Conflicts" attached to the repository name. Conflicting resources and folders containing such conflicting resources get a conflict label decoration.

Image:Conflicts.png

Alternativley, it's easy to find a list of all conflicting files in the staging area. Open the Git Staging view. The conflicting files with decorators will be seen on the left. Image:Git_merge_conflict.png

Editing conflicting files

In the file content, the area where a pair of conflicting changes happened is marked with markers <<<<<<<, =======, and >>>>>>>. The part before the ======= is typically your side, and the part afterwards is typically their side (see http://www.kernel.org/pub/software/scm/git/docs/git-merge.html#_how_conflicts_are_presented for more details).

Open the file in an editor, edit the content and save the editor.

Note that this step is not mandatory. EGit does not check the content to decide if a conflict is resolved. The next step is the relevant one.

Adding conflict resolution to the git index

Once you are finished with editing a file either click Add to Index in the Staging View or click Team > Add to add the conflict resolution to the git index. This will also mark the corresponding conflict as resolved.

When you have resolved all conflicts the textual repository label decoration changes to "Merged". There are no conflict markers anymore.

Image:ResolvedConflicts.png

Committing a merge

When the repository is in state "Merged" (as is indicated with the textual label decorator "|Conflicts" attached to the repository name) the merge can finally be committed.

In the Staging View you may want to remove the conflict remarks from the standard merge commit message which is generated by the merge operation and update the commit message if necessary. Then click Commit in order to commit the conflict resolution.

Image:Egit-3.1-StagingViewConflictsResolved.png

If you want to use the Commit Dialog to commit the conflict resolution click Team > Commit... anywhere in the navigation tree. The commit dialog opens with a slightly different look compared to a normal commit:

  • The Commit message area is prefilled with a standard merge commit message.
  • It is not possible to amend a previous commit.
  • It is not possible to add untracked files.
  • it is not possible to uncheck the checkboxes. This guarantees that all resolved conflicts are committed.

After pressing the "Commit" Button the merge is completed.

Aborting Merge

If a merge resulted in conflicts you can abort the merge with a hard reset to the current branch. This can be done in state "Conflicts" and in state "Merged", i.e. before and after you have resolved the conflicts.

The hard reset can be done from the team menu, the Git Repositories View or the History View. See Revert all local and staged changes for more details.

Rebasing

Rebase Introduction

Rebase applies a chain of commits onto a given commit. A typical scenario is the development of some feature on a "topic" branch which was created from a "master" branch at some point in time. When "master" is updated with changes e.g. from other developers while "topic" is still under development, it may become necessary to incorporate these changes into "topic". Let's assume we start development on "topic" by creating the "topic" branch from master. At this point, both "master" and "topic" point to commit "E". When the first commit ("A") is added to "topic", the commit history of the repository looks like this:

          A topic
         /
    D---E master

Now, let's assume that there were some more commits on "topic" and as well some more commits on "master" (for example, "master" may track some remote repository and there were some changes in that remote repository that have been pulled into "master"):

          A---B---C topic
         /
    D---E---F---G master

Now, in order to incorporate the changes in "master" into "topic", a Rebase of "topic" onto "master" would produce

                  A'--B'--C' topic
                 /
    D---E---F---G master

Technically, the sequence of commits that are contained in "topic" but not in "master" are applied (that is, cherry-picked) on top of "master" one by one. Note that the commits A, B, C are neither lost nor changed, instead a new chain of commits A', B', C' with the same changes and commit messages as the original commits (but different commit IDs) will be created. The old commits A, B, C are still around in the object database but not visible anymore as they are no longer reachable from any branch. A', B', C' are different from the old ones as they now also contain changes F and G.

Rebase, A Simple Example

Let's have a look at some simple example: we have a text file "FamousWords.txt" which initially might have some content like

Chapter 1
Once upon a time...

Chapter 2
To be or not to be

Now, in "topic", two commits are created, the first one adding a French translation to Chapter 2, and another one adding a German translation:

After first change in "topic":

Chapter 1
Once upon a time...

Chapter 2
To be or not to be
Être ou ne pas être

After second change in "topic":

Chapter 1
Once upon a time...

Chapter 2
To be or not to be
Être ou ne pas être
Sein oder nicht sein

At the same time, the file was changed in "master" by adding two commits adding French and German translations to Chapter 1:

Chapter 1
Once upon a time...
Il était une fois
Es war einmal

Chapter 2
To be or not to be

The commit history looks like this:

Image:EGit-0.10-MergeDemoHistory.png

Now, if "topic" is rebased onto "master", the two changes in topic are applied in the same sequence as they were applied during the evolution of "topic".

The result is a merged version of "FamousWords.txt":

Chapter 1
Once upon a time...
Il était une fois
Es war einmal

Chapter 2
To be or not to be
Être ou ne pas être
Sein oder nicht sein

and a commit history with the commit history of "topic" on top of the current "master": Image:EGit-0.10-MergeDemoHistoryAfterRebase.png

The Real World: Rebase Conflicts

Up to now, we have assumed that the changes in "topic" can be auto-merged into "master". In the real world, however, it may happen that you encounter conflicts during rebase. Now, if a commit that is to be cherry-picked contains changes that conflict with changes in "master", the rebase operation is interrupted after applying the conflicting change; the conflicts are visualized in the usual way (with conflict markers) and the user gets a chance to decide whether to

  • resolve these conflicts manually,
  • skip the current commit, or
  • abort the rebase completely

If Resolve Conflicts is chosen, and the conflicts have been resolved manually, the changes must be "Added", and then rebase can be resumed, i.e. the next commit in the chain will be applied.

If Skip was chosen, the conflicting changes will be reverted and the next commit in the chain will be applied.

If Abort was chosen, the rebase operation will be completely rolled back, returning the Repository into its original state before the rebase was started. This process is repeated until the last commit was applied successfully or skipped. Finally, the "topic" branch will be changed to point to the last commit.

To understand "Skip" better, let's look back to the introduction above. If we assume that commit "B" causes some conflicts with the current "master", the user might decide to simply skip "B"; the new commit history after the rebase would then look like this:

                  A'--C' topic
                 /
    D---E---F---G master

Starting Rebase

In the History View:

  • Checkout the branch you want to rebase
  • Select the commit onto which you want to rebase the checked out branch. This commit will become the new base for all commits being rebased
  • Click Rebase

In the Git Repositories View: On Repository nodes, Rebase... opens a dialog asking the user to select a branch that is not checked out; the currently checked out branch will then be rebased onto the selected branch. On "Branch" nodes (both Local and Remote Tracking branches, but not on the currently checked out branch), Rebase immediately rebases the currently checked out branch onto the selected branch:

Image:EGit-0.10-StartRebaseFromRepoView.png

Rebase Confirmation Dialog

If Rebase was successful, a confirmation dialog will be displayed; this dialog can be suppressed by ticking a checkbox; a preference on the Git preference page allows to make the dialogs appear again. If the dialog is suppressed, an "Information" message is written to the Eclipse log instead.

Rebase Conflicts

If a conflict occurs during rebase, a dialog is shown giving some information about the commit that caused the conflict. By selecting a radio button, you can decide whether to

  • Start the Merge Tool to resolve the conflicts manually
  • Skip the current commit
  • Abort the rebase altogether
  • Do nothing (return to the workbench), this is equivalent to hitting "Escape":

Image:Egit-3.1-RebaseResultWizard.png

Unless Skip or Abort was chosen in the dialog, the conflicts must be resolved manually by editing the conflicting files. When done with editing, the files must be declared as being resolved by adding them to the git index.

If you canceled the rebase wizard the easiest way to find the files with conflicts is using the Staging View. Click Merge Tool on the file with conflicts to open the merge tool for this file. The Merge Tool can also be started from the corresponding entry in the Team menu.

Image:Egit-3.1-StagingViewOpenMergeTool.png

Edit the file until you are happy with the conflict resolution and click Add to Index on the corresponding entry in the Staging View. This stages the conflict resolution and marks the conflict resolved.

Image:Egit-3.1-StagingViewMarkResolved.png

After all conflicts have been resolved, the Continue operation gets enabled. In order to continue the rebase operation which was stopped due to conflicts click the Continue button in the Staging View or click Rebase > Continue on the repository node in the Repositories View.

Image:Egit-3.1-StagingViewRebaseButtons.png

If instead of resolving conflicts you want to skip the commit which caused the conflicts click Skip instead.

If you want to abort the ongoing rebase operation click Abort. This reverts everything to the state before you started rebase.

Aborting Rebase

As long as the Repository is in "Rebasing" state, the user can always abort the rebase in the Git Repositories View using the menu action "Rebase > Abort" which is available on the Repository node.

Interactive Rebase

Synopsis

Image:Egit-3.2-InteractiveRebaseView.png

Interactive rebase allows to quickly edit a series of commits using the following actions defined in a rebase plan:

  • pick to define the order of commits, moving pick entries enables reordering
  • skip to remove a commit
  • edit to amend a commit
  • reword to edit a commit's message
  • squash to squash a commit with its predecessor commit and including their commit messages
  • fixup to squash a commit's diff into its predecessor discarding the squashed commit's message

Warning: don't rewrite commits you have already published on a remote repository, it's considered a bad practice for all but experimental or review branches since your colleagues may have already based their work on these published commits and you would force them to also rewrite their changes. Though it's a tool frequently used on review branches e.g. when using Gerrit to rework changes which have to be improved based on review feedback.

Starting interactive rebase

First checkout the local branch (here branch toRebase) containing the commit series you want to edit. Then open the History View for this repository and click Interactive Rebase on the commit preceding the oldest commit you want to rewrite. Often this is the one origin/master points at.

Image:Egit-3.2-StartInteractiveRebase.png

This opens the new view Git Interactive Rebase showing the rebase plan populated with the commits to be modified in topological order in the sequence they will be processed during the rebase operation. The initial action for all commits is Pick which would cherry-pick the corresponding commit. Note that EGit also rewinds HEAD to the commit preceding the first one in the edit list in order to prepare the repository for rebasing.

Image:Egit-3.2-StartedInteractiveRebase.png

Planning rebase

Here the initial rebase plan, the first commit to be applied on the rewound HEAD comes first and then all the other commits to be rebased in the order they will be applied when clicking "Start".

Image:Egit-3.2-PlanInteractiveRebase.png

Next we prepare the rebase plan, moving commits up and down using the arrow buttons to reorder commits and choosing the rebase action we want to apply on the commits we want to tweak.

In this example I first reordered the commits so that the implementation of new calculator operations immediately precedes the commit implementing tests for the respective operation.

Here what I want to modify in this series of commits:

I want to skip commit "TODO list" since it contains a private todo list I used while implementing the operations and I don't need this anymore. I need to amend commit "Add divide operation" since it's buggy, this was revealed by the corresponding test which was implemented in a later change, hence I select action Edit here the commit "Add multiply opration" obviously has a typo in the commit message header so I choose Reword. I want to squash commit de7647b into its predecessor since it doesn't make sense to have the JavaDoc fix separate from the implementation of what it describes, hence I choose Squash to squash it with its predecessor.

Image:Egit-3.2-InteractiveRebaseView.png

Executing interactive rebase

When you're done planning the rebase click Start to start execution of the rebase command. EGit will process the plan and stop at the commits where you have selected actions which need your intervention to interactively edit the corresponding commit.

In our little example rebase stops the first time on commit "Add divide operation" since we signaled that we want to edit it. The last picked commit is highlighted in bold. At this time the first step skipping the commit "TODO list" was already processed and this commit is no longer in our commit series we are rewriting while executing rebase. Also the commit "Add divide operation" was already cherry-picked since we want to amend it. Note that EGit has already selected the "Amend" option in the Staging View in order to prepare amending this commit.

Image:Egit-3.2-InteractiveRebaseEdit.png

Now we fix the bug in this commit, stage the changes needed to fix the bug, adjust the commit message if necessary and click Commit in order to amend the buggy commit.

Image:Egit-3.2-InteractiveRebaseAmend.png

Let's have a look at the History View to see the resulting commit graph. HEAD now points at the rewritten fixed commit "Add divide operation", note that its SHA1 is different from its original version since we rewrote the commit to fix the bug.

Image:Egit-3.2-InteractiveRebaseHistoryAfterEdit.png

Next we click Continue in order to resume processing the rebase plan. Rebase picks the commits "Divide test" and "Add multiply opration" and stops again raising a commit message editor so that we can fix the typo in the commit message of the latter commit.

Image:Egit-3.2-InteractiveRebaseReword.png

Edit the commit message to fix the typo and click OK in order to amend the commit message and resume processing.

Rebase picks the next 3 commits, squashes the commits "add power" and "Fix javadoc for power operation" into one new commit and stops again so that we can prepare the commit message of the new commit. Its initialized with the concatenation of the messages of the commits being squashed.

Image:Egit-3.2-InteractiveRebaseSquash.png

Edit the squashed commit's message and click OK to resume processing.

Image:Egit-3.2-InteractiveRebaseSquashMessage.png

Rebase picks the final commit "Power test" and completes successfully.

Image:Egit-3.2-InteractiveRebaseFinished.png

Finally lets have another look in the History View to examine the result of the interactive rebase command. Compare the rewritten series of commits now contained in branch "toRebase" with the old commit series still visible since I have placed another local branch "start" there in order to keep the old series visible.

Image:Egit-3.2-InteractiveRebaseHistoryAfterRebase.png

Safety Instructions

If you happen to go wrong during this multi-step process you can always hit Abort in order to stop the rebase operation in progress and roll back to the starting point.

When you are starting to use this feature it's maybe a good idea to place a second local branch on the starting point (as I showed in this example) to make it more obvious what's going on until you are familiar with this powerful git command.

Rebase with auto-stashing

EGit also supports the Git configuration option rebase.autostash. Set this option rebase.autostash = true to automatically create a temporary stash before a rebase operation begins, and apply it after the operation ends. This means that you can run rebase and also interactive rebase on a dirty worktree. However, use with care: the final stash application after a successful rebase might result in non-trivial conflicts.

Cherry Picking

Cherry-pick Introduction

A given commit C on branch stable-1.0 contains a set of changes you would like to integrate in your current development on branch master.

                  A--B--C--D stable-1.0
                 /
    D---E---F---G master HEAD

Cherry-pick the commit C to create a new commit C' on top of the head commit of the currently checked out branch master. C' will then contain the changes performed in C applied onto the HEAD of the currently checked out branch master.

                  A--B--C--D stable-1.0
                 /
    D---E---F---G--C' master HEAD

Cherry-pick Example

You are currently working on branch "feature2" (HEAD). There is a commit "feature 1" in another branch. You want to integrate the changes performed by commit "feature 1" into your current development on branch "feature 2".

  • In the History View select commit "feature 1" and click Cherry-pick:

Image:CherryPick1.png

  • As result you get a new commit "feature 1" at the tip of your current branch "feature" containing the changes of "feature 1":

Image:CherryPick2.png

  • Cherry-picking can encounter conflicts. In this case conflict markers are rendered into the affected sources:

Image:CherryPick3.png

  • Open the Staging View to quickly find the conflicting files.
  • Click Merge Tool on a file with conflicts to open the merge tool for this file
  • Resolve the conflicts by editing the corresponding sources in the same way as described in Resolving a merge conflict
  • Add the files you edited to mark the conflicts resolved
  • Commit the conflict resolution

Tagging

Creating a Tag

  • Open the History View and click Create Tag... on the commit you want to tag

Image:Egit-3.1-CreateTagDialog.png

  • Enter the tag name
  • Enter the tag message
  • Click OK to create the annotated tag

To create a lightweight tag storing neither message nor author information leave the tag message empty.

Tags can also be created from the team menu, click Team > Advanced > Tag..., enter the tag name and message, select the commit you want to tag (default is HEAD) and click OK.

Replacing an Existing Tag

What to do if you tagged the wrong commit or ended up with some sort of typo ?

  • If you didn't yet push this out just replace the tag and you are done.
  • If it's already published you shouldn't replace the tag but use a new name since otherwise you have to tell everybody who got the old tag to replace it manually with your updated one. This is because, Git does not (and it should not) change tags behind users back. So if somebody already got the old tag, doing a git pull on your tree shouldn't just make them overwrite the old one.

So if your old tag wasn't yet pushed you may correct it in the following way :

  • In the History View click Tag... on the commit you want to place the tag on

Image:Egit-3.1-ReplaceExistingTag.png

  • Select the tag you want to replace from the list of existing tags
  • or start typing any part of the tag you look for into the Tag Name field, this will filter the list of existing tags to those tags which contain the string you are typing, then select the tag you want to replace
  • Mark the checkbox Force replace existing tag
  • Change the tag and press OK

You can also change annotated tags into lightweight tags by removing the message or vice versa by adding a message.

Deletion of tags

In order to delete a tag, select the tag to be deleted and click Delete Tag.

Note: it's a bad practice to delete tags which have already been published on a public server, some Git servers even disallow tag deletion to ensure traceability for releases which are usually tagged. Also see the section "On re-tagging" in the Git reference documentation of the tag command.

Light-weight and Signed Tags

Light-weight tags are shown in the Repositories View as well as in the Create Tag dialog. Tags are shown with a blue icon in the Repositories View; annotated tags are decorated with a yellow person icon.

Image:Egit-1.1-tags.png

In the History View, tags are shown as yellow labels.

Image:Egit-1.1-tags-history.png

Signed tags are not yet supported by EGit, use command line git`` ``tag`` ``-s instead.

Patches

Creating Patches

"A patch is a piece of software designed to fix problems with, or update a computer program or its supporting data" (wikipedia). A patch file contains a description of changes of a set of resources which can be automatically applied to another eclipse workspace or git repository.

The patch formats used by eclipse (Team > Apply Patch) and by git (git`` ``apply or git`` ``am on the command line) are different. It is possible to create both types of a patch in EGit.

Create a Patch from a Commit

This is the most common use case for a distributed versioning system. A developer commits a change on a local feature or bugfix branch and wants to export this change into a patch file.

It can be done from the history view:

Image:Egit-0.0-create-patch-menu.png

The patch file will contain the difference between the commit and its parent in the history view. Note that the filter of the history view applies also for patch creation.

Patch Wizard

The Wizard consists of two pages. Page one lets you select the location of the patch:

Image:Egit-0.0-create-patch-dialog.png

The name of the patch file is created from the first line of the commit message.

On the second page you can change the patch format.

Currently there is one check box: Export in git patch format.

  • If you do not check it (this is the default) the patch can be applied with the eclipse Apply Patch... wizard. The paths are relative to the eclipse projects and do not contain prefixes (like git format-patch --no-prefix on the git command line).
  • If you check it the patch will look like the result of git format-patch --no-stat on the git command line.

Binary diffs are currently not produced.

Applying Patches

Currently EGit isn't able to apply patches in git format. It is possible to apply patches using the standard Eclipse (unified diff) format using Team > Apply Patch.... Git patches may contain non-standard extensions for rename and binary diffs. The current version of EGit does not generate these extensions.

Managing Repositories

The "Git Repositories View" is the primary UI element to facilitate working with multiple Repositories simultaneously (i.e. within one Eclipse Workspace).

This view can be opened using the menu path Window > Show View > Other... > Git > Git Repositories

It is also part of the "Git Repository Exploring" perspective available using menu path Window > Open Perspective > Other... > Git Repository Exploring

If you already have projects in your workspace which are shared with a Git Repository, you can use Team > Show in Repositories View

on any resource to open the view.

Adding Repositories to the Git Repositories View

Initially, the Git Repositories View is empty. In order to add Repositories to it, there are several options:

  1. Adding a Repository from the Local File System manually
  2. Cloning a Repository and having the cloned Repository added to the view automatically
  3. Creating a Repository on the Local File System
  4. Adding a Repository by pasting a Git Repository path to the view

Adding a Repository manually

You can add a Repository from your local file system to the Git Repositories View without cloning it. This can be helpful if you are setting up a new Eclipse workspace and want to re-use your Git Repositories. Use the Add an existing Git Repository button from the view's toolbar:

Image:RepoMgrAddRepositoryIcon.png

A dialog will appear prompting you for a directory of your local file system. After selecting the correct directory, you can hit the Search button to see a list of Git Repositories in this directory. You can then select some or all found Repositories and add them to the view using OK:

Image:Egit-0.11-import-projects-add-dialog.png

Cloning a Repository

In order to clone a Repository, refer to Cloning remote Repositories. After a successful clone operation, the newly cloned Repository should appear in the Git Repositories View automatically.

You can also use the Clone a Git Repository button from the view's toolbar to start the Clone wizard:

Image:RepoMgrCloneRepositoryIcon.png

Please refer to Cloning remote Repositories about how to use the wizard.

Creating a Repository

You can create a new, empty repository on the local file system. This is useful if you later on want to create one or more new projects below this repository. Another usecase is to create a new bare repository where you can push to. Use the Create a new Git Repository button from the view's toolbar:

Image:RepoMgrCreateRepositoryIcon.png

A dialog will appear which lets you choose a directory:

Image:RepoMgrCreateRepositoryDialog.png

If you select the checkbox Create as Bare Repository the new repository will not have a working directory. You then can only add content by pushing changes from another repository.

Adding a Repository using Copy and Paste

As a shortcut, it is also possible to paste the local file system path of a Git repository from the clipboard into this view. In order to do so, copy the path of a Git repository (the full path of its .git folder) to the clipboard, then open the context menu on the view panel:

Image:RepoMgrPasteRepositoryPath.png

or click Edit > Paste from the main menu (or the corresponding keyboard shortcut). If the clipboard content is not suitable, an error popup will be displayed, otherwise the added Repository should appear automatically.

After the view has been populated with some repositories, it should look like this:

Image:RepoMgrViewWithRepos.png

Removing Repositories

Removing a Repository from the Repositories View

In order to remove a repository from the Repositories View select a repository and click "Remove Repository"

Image:Egit-0.10-RemoveRepository.png

Deleting a Repository

In order to delete a repository, select it in the Repositories View and click "Delete Repository".

Image:Egit-0.10-DeleteRepository.png

Then confirm that you want to delete the repository and decide if you want to delete the repository's working directory with the projects contained in the repository from the Eclipse workspace.

Image:Egit-3.1-DeleteRepository.png

Attention: deleting the working tree (second checkbox) along with the repository (the .git directory; first checkbox) of course removes everything contained in that working tree directory. This includes Eclipse projects that were ever shared (see Adding a project to version control) with that git repository, even if later disconnected (Team→Disconnect)! Sharing a project copies it into the git working tree; disconnecting it does not copy it back.

Structure of the Git Repositories View

The following screenshot shows the topmost two levels of the Git Repositories View:

Image:Egit-0.11-RepoViewTopLevel.png

The root node represents the Repository itself. The node text indicates the name of the Repository and its location in the local file system. The "Branches" and "Tags" nodes allow browsing and manipulation of tags and branches. The "References" node lists other references which are not branches or tags, most notably the "HEAD" and "FETCH_HEAD" symbolic references (see Git References).

The "Working Directory" node displays the location and structure of the working directory on the local file system (only in case of a development, or non-bare Repository, for bare Repositories, this node is always a leaf).

Finally, the "Remotes" node allows browsing and manipulating the remote configurations used for Fetch and Push.

Repository Groups

The repositories shown in the Git Repositories View can also be organized into groups. Groups are like logical folders; they are a purely visual structuring aid: moving a repository into or out of a group does not move the repository on disk. A group does not have a folder on the disk.

File:EGit_5_6_Repository_Groups.png

Repository groups can be created via the context menu, sub-menu "Repository Groups", or via the view menu, entry "Create Repository Group...". Repositories can be moved into or between groups by drag'n'drop or via the context menu. Dragging a repository from a group into the white unused area of the view moves the repository out of the group, back to top-level. Groups can be renamed or deleted via the context menu. Deleting a group never deletes the repositories contained, those just go back to the top level. Nested groups are not supported.

Functions of the Git Repositories View

Project Import

In order to work with the contents of a Git Repository, its files and folders must be imported into the Eclipse workspace in the form of projects. While the Git Clone wizard allows to do such imports directly after cloning, the Git Repositories View allows to trigger project imports independently of the clone operation.

The "Import Projects..." context menu is available on the "Repository" node as well as on any "Folder" node within the "Working Directory" node and the "Working Directory" node itself:

Image:Egit-0.11-ImportProjectsFromRepoView.png

The rationale for offering the Import Projects... action on several nodes is that some of the wizards used for importing projects can take the file system directory into account, for example the Import Existing Projects wizard. If the import is started from the "Repository" or the "Working Directory" node, the working directory of the repository is set as context, otherwise the directory corresponding to the currently selected "Folder" node.

The details of project import are discussed in Use the New Projects Wizard.

Branch and Tag Support

The "Branches" node allows to create, browse, checkout and delete local and remote branches. The "Tags" node allows to browse and check out tags. Both the "Branches" node and the "Tags" node allow to merge the branch or tag into the currently checked out branch and also to synchronize with the currently checked out branch.

For better readability, branches are organized in two sub-nodes for local and remote branches, respectively, and only the shortened names are displayed, e.g. instead of "refs/heads/master" you would find an entry "master" under the "Local Branches" node, instead of "refs/remotes/origin/master" the shortened name "origin/master" is displayed under the "Remote Branches" node. Similarly, tag names are shortened by omitting the "refs/tags/" prefix:

Image:RepoMgrBranchesAndTags.png

Check-out of Branches and Tags

Branches and tags can be checked out by either double-clicking on the respective node or by selecting the corresponding context menu entry.

Creation and Deletion of Branches

Local branches can be created using the Branch Creation Dialog. The wizard is opened by right-clicking on the "Branches", the "Local Branches" on any "Branch" and "Tag" node).

Branch deletion is done using the corresponding context menu entry.

Rebasing

You can trigger rebasing of the currently checked-out branch onto another branch by right-clicking Rebase on any (local or remote tracking) branch node.

Merging a Branch or a Tag

You can trigger a merge from any branch and tag node and from the repository node if you have checked out a local branch. See Merging for further details of the merging features.

  • When you select any branch node other than the currently checked out branch or any tag node, use Merge to directly trigger a merge into the currently checked out branch.

  • When you select the repository node or the currently checked out branch, use Merge... to open the merge dialog. The merge dialog is described at Merging a branch or a tag into the current branch.

Synchronizing with a Branch or a Tag

You can perform a comparison of the changes in your HEAD with the changes done in any other branch or tag. Right click and select Synchronize... on any branch or tag. Then the eclipse synchronize view opens which contains a representation of the changes that are contained in your HEAD but not on the other branch or tag (outgoing change) or vice versa (incoming change). Please refer to the documentation of the synchronize feature for further details.

Determining the Checked-out Branch

There are two ways to determine which branch or tag is currently checked out: the checked out branch/tag node is decorated with a little check mark and the "HEAD" entry under the "Symbolic References" node shows the (full) name of the checked out branch:

Image:RepoMgrCheckedOutBranch.png

Resetting to a Branch or a Tag

Right click and select Reset... on any branch or tag. This opens a dialog which lets you decide on the reset type. See Resetting you current HEAD for further details.

"Detached" HEAD

If HEAD is "detached", i.e. is not pointing to the tip of a local branch but to a commit or tag, then none or several "checked-out" markers may appear in the tree, since any number of remote branch or tags may point to the currently checked out commit. The state you are in while your HEAD is detached is not recorded by any branch (which is natural --- you are not on any branch).

Inspecting References

The References node displays some References other than branches and tags (the list is dynamic and depends on the current state of the Repository):

Image:Egit-0.11-RepoViewReferencesNode.png

If the Reference is symbolic, i.e. points to another Reference, the name of the target reference is shown, followed by the object ID of the reference's target. If the Reference is not symbolic, only the object ID is shown.

In the example above, HEAD is a symbolic Reference pointing to branch "refs/heads/master" (i.e. branch "master" is checked out", while FETCH_HEAD points directly to commit 226a7f... .

The following actions are available on right-clicking on a Reference: Checkout(unless the Reference is already checked out) and Create Branch... .

Browsing the Working Directory

The "Working Directory" node visualizes the local file system structure of the Git Repository. It is also possible to open a text editor on the files:

Image:RepoMgrOpenTextEditor.png

Alternatively, files can be opened by dragging them from the Working Directory to the Editor Area.

Also, on all file and folder nodes as well as on the "Repository" node, an option is offered to copy the (file-system specific) path to the clipboard. This is sometimes useful when the path is needed, for example to open a directory using a file browser or to copy and paste Repositories between view instances (see above about how to add Repositories to the view). The Copy to Clipboard action is also available using Edit > Copy (or the corresponding keyboard shortcut).

Repository Configuration

Integration with the generic "Properties" view in Eclipse allows to view and edit the Git Configuration (global and repository-specific configuration). If the "Properties" view is open, it is updated automatically when a "Repository" node is selected. With a drop down box (left red box in the screen shot) you can switch between the display of the Repository Configuration, the Global Configuration and a view which aggregates both. If the view displays the Repository Configuration or the Global Configuration you can open an editor dialog with the Edit button (right red box in the screen shot). The editor dialog has the same functionality as the preference page Team > Git > Configuration.

In the Git Repositories view, there is a Properties action in the context menu, which will open a configuration dialog allowing to edit the Repository Configuration. Here, key value pairs can be added, changed or deleted. The Open button allows to open the Repository Configuration file in a text editor.

Remote Repositories

The "Remotes" node allows for browsing and editing Remote configurations. Each Remote configuration has a name and either a Push Specification, a Fetch Specification, or both. If a "Remote Configuration" node or any of its children is selected, the Properties view will show a summary of the Remote configuration. In this example: there is a Remote configuration named "origin" which only has a Fetch Specification, but no Push Specification:

Image:RepoMgrRemoteConfig.png

Menu actions are provided to add, configure, and remove Remote configurations and Fetch and Push Specifications.

Direct Fetch and Push Support

It is possible to execute fetch and push directly (i.e. without a wizard) on the remote node as well as on the respective "Fetch" and "Push" nodes:

Image:RepoMgrSimpleFetch.png

Note that the fetch or push operation will be executed immediately in an asynchronous job; on completion you will get a confirmation pop-up displaying the fetch result.

The "Fetch" node contains a so called fetch specification and the "Push" node contains a so called push specification.

A default fetch specification is created when the repository is cloned. You can edit the fetch specification with the menu entry Configure Fetch.... This opens a wizard. On the first page you can edit the Fetch URI. Ob the second page you can determine the fetch ref specifications, see Fetch Ref Specifications.

You can create or edit a push specification with the menu entry Configure Push.... This opens a wizard. On the first page you can edit the Push URIs. If a fetch is specified the fetch URI is automatically included into the push specification and no additional Push URI is needed. On the second page you can determine the push ref specifications, see Push Ref Specifications.

Adding a Remote Configuration

This is done using a context menu action on the "Remotes" node. A wizard is started asking for the name of the new configuration and whether to configure Fetch, Push, or both:

Image:RepoMgrNewRemote.png

If the Configure Fetch checkbox was selected, the next wizard page will ask for the URI of the Repository to fetch from:

Image:Egit-0.9-repo-view-createRemoteWizardFetch.png

Click Change... to open a dialog that allows you to select a URI. The next step is to define the Remote Specification for the fetch URI. See Fetch Ref Specifications about the details.

If the Configure Push checkbox was selected, the next wizard page will ask for the URIs of the repositories to push to. This is actually a list, as you can push to multiple repositories at once. Click Add.... to add URIs to the list using the same dialog as above. You can remove URIs by marking them in the list and hitting Remove. This step is completely optional if there is already a fetch URI defined. In this case, the fetch URI will also be used for push. If at least one push URI is defined in this steps, it will override the fetch URI. In this example, there is already a fetch URI, so the Next button is enabled, even though there is no Push URI in the list:

Image:Egit-0.9-repo-view-createRemoteWizardPush.png

The next step is to define the Remote Specification for the push URIs. See Push Ref Specifications about the details.

Upon completion, the new Remote configuration will be visible:

Image:RepoMgrRemoteCreated.png

Changing Remote Configurations

It is also possible to add, remove, or change Fetch/Push Specifications for an existing Remote configuration using the context menu.

Gerrit Configuration

If you work with Gerrit Code Review as remote repository server you can

  • specify the push configuration used to push changes to code review
  • specify the fetch configuration to fetch the review notes from Gerrit
  • configure your repository to select the Compute Change-Id for Gerrit Code Review option in the Commit dialog by default

Select Gerrit Configuration... from the context menu of a Remote. This opens a wizard with one page:

Image:Egit-2.1-clone-wizard-gerrit-page.png

  • When you click Finish the wizard sets the repository configuration parameter gerrit.createchangeid to true. This ensures that the checkbox Compute Change-Id for Gerrit Code Review in the Commit dialog is selected by default. See Commit Message for details.

  • If you want to configure automatic Change-Id insertion at a later point in time you may use the repository configuration editor (Preferences > Team > Git > Configuration) to set the configuration parameter gerrit.createchangeid to true. If you want this configuration for all your repositories you may put it into ~/.gitconfig then you don't need to repeat this configuration for every new repository you happen to work on.

  • Additionally the wizard adds a refspec "refs/notes/*:refs/notes/*" to your fetch specification. Gerrit stores data about the review in git notes. With this refspec these review data will be fetched automatically when you fetch from this remote and they will be displayed in the commit viewer.

  • In the section Push URI you can configure the URI which is used for the default push configuration. It is pre-filled depending on the URI you are cloning from. If you clone with the git protocol, the protocol is automatically changed to ssh, and the default Gerrit ssh port 29418 is automatically added. For protocols which require a user there is a user field for convenience.

  • The section Push Configuration has one field, Destination Branch. Here you should enter the name of the target branch where changes accepted in the Gerrit code review workflow will be submitted to. This yields an entry HEAD:refs/for/<branchname> in the push configuration of the remote you specified in the clone wizard.

  • Repositories which have been configured for Gerrit are displayed with the green Gerrit decorator

Image:Egit-3.1-RepositoryGerritDeco.png

Refresh

The view is auto-refreshed periodically. The Refresh button in the toolbar allows to trigger an immediate refresh:

Image:RepoMgrRefresh.png

Link with Selection

If the Link with selection toggle is enabled, the file or folder corresponding to the current workbench selection will be displayed automatically:

Image:RepoMgrLinkWithSelection.png

Link with Editor

If the Link with editor toggle is enabled, the file or folder corresponding to the currently active editor will be displayed automatically:

Image:RepoMgrLinkWithEditor.png

Hierarchical Branch Layout

If the Hierarchical Branch Layout toggle is enabled, branches will be shown in a hierarchical layout using slash (/) as hierarchy separator:

Image:RepoMgrHierarchicalBranchLayout.png

This can be helpful for organizing large numbers of branches.

Bare Repositories

"Bare" Git Repositories (as opposed to "development" or "standard" Repositories) have no working directory by definition, so all actions related to the working directory (check-out, project import, browsing the working directory) are not available for such Repositories. The "Bare-ness" of a Repository is visualized on the "Working Directory" node, which is always a leaf:

Image:RepoMgrBareRepository.png

Bare repositories are only changed by pushing changes to them.

Removing Repositories from the Git Repositories View

This is offered as a menu action on the "Repository" node. Note that this does not delete the Repository, but just removes the node from the view. If there are projects in the workspace which are located in the working directory of the Repository, the user will be prompted to confirm deletion of these projects from the Eclipse workspace.

Showing Repository in Related Views

Show in History

The command Show in > History will open the History View showing all changes in the selected repository.

Show in Reflog

The command Show in > Reflog will open the Git Reflog view showing the Git reflog of the selected repository.

Show in Properties

The command Show in > Properties will open the Properties view showing the properties of the selected repository.

Working with Tasks

The EGit integration with Mylyn was moved to Mylyn in Eclipse 2023-06. See mylyn.egit.

Viewing Commits

The Egit commit viewer allows commits to be opened in the Eclipse editor area.

The EGit commit viewer displays the following commit information:

  • Commit tab
    • Links to open parent commits
    • Author
    • Committer
    • Message
    • List of tags pointing to this commits
    • List of branches that the commit exists on

Image:Commit-editor-commit-page-egit-4.6.png

  • Diff tab
    • Read-only text editor with the output of the file differences, with a content outline linked to the editor.
    • The colors used in the viewer for highlighting lines can be configured from the Preferences > General > Appearance > Colors and Fonts > Git folder.
    • The overview ruler right of the editor's text viewer shows colored annotations for all added or removed lines.
    • Quick navigation between "hunks" (changes with added or removed lines) is available via clicking on an annotation in the overview ruler, or via the "Go To Next Annotation"/"Go To Previous Annotation" actions in the global Eclipse toolbar (default keyboard shortcuts are "Crtl/Cmd-." and "Shift-Ctrl/Cmd-.").
    • Line numbers in hunk headers, as well as the file names in file diff headers are hyperlinks to open the old or the new version or also the current working tree version in an editor, or to show a two-way diff between the old and the new version. The latter is also available on the word "diff" in a file diff headline (the one starting with "diff --git"). These links are only available if applicable; for instance there will be no link to open the old version for an added file since there was no old version in this case.

Image:Commit-editor-diff-page-egit-4.6.png

  • Notes tab
    • All Git notes for the commit

Image:Commit-editor-notes-page-egit-4.6.png

Tagging a commit

  • Select the Create Tag icon from the commit viewer toolbar
    • The Tag dialog will open allowing you to create a tag from the commit.

Creating a branch from a commit

  • Select the Create Branch icon from the commit viewer toolbar.
    • The Branch dialog will open allowing you to create a new branch from the commit

Checking out a commit

This checks out the commit displayed in the commit viewer. The commit will be checked out and HEAD will become detached.

Cherry picking a commit

Applies the change introduced by the commit displayed in the commit viewer on top of the currently checked out commit or branch.

Opening the commit viewer

The commit viewer can be opened from the following places:

Searching for commits

EGit supports searching for commits.

Git Search page

Commits can be searched from the Git Search tab in the standard Eclipse Search dialog.

This dialog supports searching for text or patterns present in the different fields of a Git commit such as the message, author line, committer line, and the SHA-1 ids of the commit, its parent(s), and the tree associated with it.

Image:Git-search-page.png

Browsing Search Results

Commit search results are displayed in the standard Eclipse Search view. Results are grouped by repository when in Tree mode. Double-clicking a commit from the Search view will open it in the commit viewer.

Image:Git-search-results.png

Launching Git Search

The Git Search page can be opened by selecting the Git Search option from the Search drop-down on the Eclipse toolbar.

Image:Git-search-dropdown.png

Open commit dialog

EGit has an Open Git Commit dialog similar to the Mylyn Open Task and coreOpen Resource dialogs. The dialog searches every configured Git repository for the branch, tag, or commit SHA-1 entered into the filter box and displays the matching commits.

Image:Git-open-commit.png

The dialog can be opened by selecting the Open Git Commit button on the Eclipse navigation toolbar.

Image:Git-open-commit-toolbar.png

Finding the author of each line in a file

EGit supports showing git blame information inside the editor ruler.

Selecting the Team > Show Revision Information action on file selections will open the editor and display an annotation ruler with commit and author information for each line in a file. Hovering over the ruler will display a pop-up showing the commit id, author, committer, commit message and the diff applied by this commit on the selected hunk.

The look and feel of the blame annotation editor ruler can be configured from the Revisions sub-menu available from the ruler context-menu.

Image:Egit-3.2-BlameImprovements.png

Click open commit to open the commit in the commit viewer, click show in history to show the commit in the History View. Click show annotations to show annotations of the parent commit of the commit shown in the hover.

Working with Submodules

You can read more about what Git submodules are and how they work in this Git Community Book chapter.

Cloning Repositories with Submodules

Submodules are repositories nested inside a parent repository. Therefore when doing a clone of a parent repository it is necessary to clone the submodule repositories so that the files/folders are available in the parent repository's working directory.

Checking the Clone Submodules button from the Git Clone wizard will clone all submodule repositories after the clone of the parent repository finishes.

Image:Egit-13-clone-submodules-wizard.png

Browsing Submodules

There is a Submodules node displayed in the Git Repositories view for repository's that contain submodules.

All submodules in the given parent repository are displayed under this node as well as information about what commit is currently checked out.

Image:Egit-13-submodules-node.png

Adding a Submodule

You can add a new submodule to a repository by selecting a repository in the Git Repositories view and selecting the Add Submodule context menu option.

The wizard will prompt for the path and URL of the submodule being added. The path entered will be relative to the parent repository's working directory and the URL will be used to clone the repository locally.

Once the wizard is completed the submodule will be cloned, added to the index, and the submodule will be registered in the .gitmodules file as well as in the parent repository's .git/config file.

Updating Submodules

There are two actions that can be used to update submodules, Update Submodule and Sync Submodule.

Selecting the Update Submodule action on a submodule will check out the commit referenced in the parent repository's index for that submodule. This command will also perform a merge or rebase if that has been configured in the update field for the selected submodule's configuration section in the parent repository's .git/config file.

Selecting the Sync Submodule action on a submodule will update the remote URL used by the submodule from the current value in the .gitmodules file at the root of the working directory of the parent repository.

Team Project Sets

Team project sets (.psf files) are supported by the Git team provider.

Import

To import an existing project set, use the Import... wizard and then select Team Project Set from Team.

You can then select a file which contains the import definitions and optionally choose to add imported projects to a working set.

In the next step, the repositories are cloned, the projects imported and connected. This can take a while depending on the size of the repositories.

Export

To create a project set file for existing Git projects, select the projects/working sets which are already connected to the Git team provider.

Then open the Export... wizard and select Team Project Set from Team. There you can choose to export working sets or projects only and can refine your selection. In the next step, select an output path and finish the wizard.

Format

You can also manually edit a .psf file. Each project has an entry which looks like this:

<project reference="1.0,git://egit.eclipse.org/egit.git,master,org.eclipse.egit"/>

The values are separated by commas and have the following meaning:

  1. Format version
  2. Git repository URL
  3. Name of branch to initially check out
  4. Path to the project to import (folder which contains .project), relative to the repository

Each project has one entry. So for multiple projects in the same repository, create such an entry for each project with the same repository URL. The import is smart enough to only clone each repository once.

If the repository contains a project at the root, use . as the project path.

GIT LFS Support

Partial support for GIT LFS is included in EGit when the optional JGit LFS support bundle "Java implementation of Git - optional LFS support" is installed. This support works best when using the SSH protocol with a capable LFS remote (i.e. GitHub or Gerrit with LFS plugin).

To enable usage of EGit's LFS support, either enable it globally (for the current user) by pressing the "Enable LFS support globally" button:

File:EGit-5.0_LFS_enable_globally.png

... or configure Eclipse to automatically make sure the LFS support is enabled whenever Eclipse starts up. Check the "Automatically configure LFS..." checkbox:

File:EGit-5.0_LFS_enable_automatically.png

... or - to enable builtin LFS support only for a single repository - right click a repository and select "Enable LFS locally"

File:EGit-5.0_LFS_enable_locally.png

Note that if the JGit LFS support has not been installed some actions are disabled. If LFS support is already enabled in a more global scope the "Enable LFS locally" action is not displayed.

Once LFS support is enable directly or indirectly for a repository, you can work as usual with files, more specifically these use cases should work:

  1. Fetching LFS objects from a LFS Server (note that HTTP authentication is not implemented yet, so SSH works best, as this provides a mechanism to authenticate).
  2. Pushing LFS objects to an LFS Server (same note about HTTP authentication applies).
  3. Staging and committing files which are managed by LFS (through .gitattributes).
  4. Checking out files managed by LFS
  5. Viewing LFS managed file's content from the GIT history
  6. Comparing actual file content for LFS managed files from the history

Reference

Menus

Project Context Menu

On project nodes in navigation views (Navigator, Package Explorer etc.) the following Git actions are available for projects shared with the Git team provider:

main project menu

Image:Egit-3.1-ProjectMenu-Main.png

"Remote" sub-menu

Image:Egit-3.1-ProjectMenu-Remote.png

"Switch To" sub-menu

Image:Egit-1.2-project-menu-switchto.png

"Advanced" sub-menu

Image:Egit-3.1-ProjectMenuAdvanced2.png

Resource Context Menu

On resource nodes (files and folders) in navigation views the following Git actions are available for projects shared with the Git team provider:

Image:Egit-3.1-ResourceMenu.png

Repositories View Menus

In the Repositories View the menu depends on the node type which is selected

Image:Egit-0.10-repoview.png

Menu on repository nodes:

Image:Egit-3.1-ResourceMenu.png

Menu on branch nodes:

Image:Egit-3.1-RepoViewBranch.png

Menu on tag nodes:

Image:Egit-3.1-RepoViewTag.png

Menu on Reference nodes:

Image:Egit-3.1-RepoViewReference.png

Menu on Remote nodes:

Image:Egit-3.1-RepoViewRemote.png

Menu on Fetch Configuration nodes:

Image:Egit-3.1-RepoViewFetchConfig.png

Menu on Push Configuration nodes:

Image:Egit-3.1-RepoViewPushConfig.png

Menu on Working Tree nodes:

Image:Egit-3.1-RepoViewWorkingDir.png

History View Menus

Menu on entries in the History View's commit list

Image:Egit-3.1-HistoryViewMain.png

Menu entries in the History View's Quickdiff sub menu

Image:Egit-3.1-HistoryViewQuickDiff.png

Git Workbench Toolbar and Git Workbench Menu

In order to ease use of the most frequently used Git actions the Git Command Group can be activated to show a Git Workbench Toolbar and/or Menu

  • Click Window > Customize perspective...
  • in the tab Command Groups Availability click Git, this will enable both the Git workbench toolbar and menu
  • in the tabs Toolbar Visibility and Menu Visibility you may configure which actions should appear in the Git Workbench toolbar and menu

Image:Egit-3.1-GitToolbar.png

Image:Egit-3.1-GitMenu.png

Menu Actions

  • Add
    • Add changes present in the working tree to the git index, also known as staging changes.
    • Put newly created resources under git version control (Git does not automatically start tracking resources).
    • Resolve conflicts.
  • Apply Patch - Apply a patch.
  • Assume unchanged - Resources can be flagged "assume unchanged". This means that Git stops checking the working tree files for possible modifications, so you need to manually unset the bit to tell Git when you change the working tree file. This setting can be switched on with the menu action Team > Assume unchanged and switched back with the menu action Team > No Assume unchanged.
  • Branch, Create Branch - Checkout a branch or create a branch.
  • Change Credentials - Change logon credentials of a Fetch or Push Specification, credentials are stored per URL in the Eclipse Secure Store.
  • Checkout - Checkout a Branch, Tag, Commit or Reference.
  • Cherry-pick - Cherry-pick a single commit onto the tip of the currently checked out branch.
  • Clear Credentials - Clear logon credentials of a Fetch or Push Specification, credentials are stored per URL in the Eclipse Secure Store.
  • Commit - Commit changes.
  • Delete Fetch - Delete a Fetch Specification.
  • Delete Push - Delete a Push Specification.
  • Configure Fetch - Configure a Fetch Specification.
  • Configure Push - Configure a Push Specification.
  • Delete Branch - Delete a branch.
  • Delete Repository - Delete a repository.
  • Disconnect - Disconnect the attached Git Team Provider from this project. The git repository still exists but is no longer integrated with Eclipse.
  • Ignore - Add files to .gitignore so that git ignores them.
  • Import Projects - Import projects into the Eclipse workbench.
  • Merge - Merge branches.
  • Merge Tool - Resolve conflicts using the Merge Tool.
  • Open Properties View - View and edit the repository configuration.
  • Pull - Pull changes from remote branch tracked by currently checked out local branch.
  • Remote >Fetch From - Fetch changes from a remote repository
  • Remote > Fetch from Gerrit - Fetch change from a Gerrit Code Review Server
  • Remote > Push - Push changes to other repositories
  • Remote > Configure Fetch from Upstream - Configure Upstream for automated fetch
  • Remote > Configure Push to Upstream - Configure upstream for automated push
  • Rebase - Rebase a branch onto another one.
  • Remove Repository - Remove a repository from the Repositories View.
  • Rename Branch - Rename a branch.
  • Reset - Reset the current HEAD, Index or Working Tree.
  • Show in History - Show the selected resource in the History View.
  • Show in Repositories View - Show the selected resource in the Repositories View.
  • Switch to... - Switch to (also known as checkout) another branch or tag.
  • Synchronize - Synchronize local and remote branches with each other.
  • Tag - Create, delete tags.
  • Untrack - Remove resources from git version control. If you want to delete the resource from the working tree click also Delete in the resource's context menu.

Git Perspective and Views

Git Perspective

Window > Open Perspective > Git Repository Exploring opens the Git Repository Exploring perspective

Git Repositories View

Window > Open View > Git > Git Repositories opens the Git Repositories view which is explained in detail here.

History View

Overview

The History View for Resources under Git version control is a commit-centric view of the resources in a given Repository. It can be used to perform the following tasks:

  • Inspecting the change history of a given File under Git version control (viewing and comparing the versions of such a File in the Repository)
  • Search for a certain commit using different search criteria
  • Check-out of a certain commit
  • Creation of branches and tags based on a certain commit
  • Creation of patches based on the changes in a certain commit
  • Resetting the complete Repository to a certain commit
  • Setting and resetting of the quickdiff baseline to a certain commit

Opening the History View

The History view can be opened by

  • Right-clicking Show In > History View on any resource under Git version control in the explorer (not available in all Perspectives)
  • Right-clicking Team > Show in History on any resource under Git version control in the explorer
  • Clicking Window > Show View > Other..., then Team > History

Once the view is open, you can activate the Link with Selection button to keep the input of the view in sync with the selection in the explorer automatically.

Organization of the History View

The History view is organized in several panes:

Image:Egit-0.9-history-view.png

The upper pane is the Commit Graph displaying the commit log (or commit history) in reverse chronological order (newest commit on top). Below the commit graph, there are by default two panes: on the left side, the Revision Comment area, which shows the commit message and a textual Diff of the file or files in the commit, and on the right side, the Revision Detail area, which shows a table of the files that were changed by the commit.

The first column of this table describes the nature of the change for each file:

ADD  the file was added by the commit

MODIFY  the file was modified by the commit

DELETE  the file was deleted by the commit

The content of the lower panes depends on the selection in the upper pane and is updated automatically when this selection changes.

Both lower panes can be switched on and off separately by right-clicking anywhere in the upper pane and selecting Show Revision Comment and Show Revision Details, respectively.

Above the Commit Graph, the current input is visualized. The input is always a workspace resource, either a project, a folder, or a file. After the type of the input, the path is shown, followed by the name of the Repository containing the resource in square brackets.

Using the History View

Inspecting the Commit Graph

The Commit Graph area is the main part of the History View. By default, it shows the currently checked out commit and all its ancestors, i.e. the first entry in the list is the checked out commit. The following picture is used to explain some of the features of the History View:

Image:Egit-0.9-history-view-branchAndMerge.png

Each line in the Commit Graph corresponds to a commit. Branches, tags and HEAD are visualized as follows:

  • The tips of local branches are shown as green rectangles
  • The tips of remote branches are shown as grey rectangles
  • The local HEAD is shown as a white rectangle
  • Tags are shown as yellow rectangles

(our example doesn't have remote branches).

The line on the left side is the actual commit graph, which shows the parent-child relation of the commits in the list (each commit has at least one parent, except for the very first commit in a Repository). There can be forks, which correspond to a branch operation, and joins, which correspond to a merge operation. In our example, there was a branch "experimental" created after the commit with branch "beforeSplit", and the same file was changed both in the "master" and in the "experimental" branch. The last commit is a merge commit where the content of the "experimental" branch was merged with the "master" branch.

The exact change can be inspected by marking a commit and looking at the Revision Comment area. When scrolling down in the Revision Comment area, a textual diff for the changes will be visible, in our example it says that the content of Project1/f1/file1.txt was changed from "modified" to "modified in master". When selecting the next commit (which corresponds to the "experimental" branch), a similar diff would be displayed, saying that the content of that file was changed from "modified" to "modified in experimental". The newest commit is the result of merging "experimental" into "master". Accordingly, the new commit has two ancestors and the "master" and "experimental" lines are joined again.

Displaying and Comparing versions of a File

If the current input is already a file, right-clicking Open on a commit will open an editor with the file content corresponding to the currently selected commit. If the file does not exist in the selected commit, an error message will be displayed. Clicking Compare with working tree will open a compare editor comparing the file content of the currently selected commit with the file content in the workspace.

Image:Egit-0.9-history-view-openAndCompare.png

The Open and Compare with working tree actions can also be executed by double-clicking on a commit: if the "Compare Mode" toolbar button (see below) is down, Compare with working tree will be executed, otherwise Open.

It is possible to compare the contents of two commits filtered by the current input by selecting the two commits and right-clicking on Compare with each other. If the current input is not a file, there is an additional menu action Compare with each other in Tree. The first action opens an Eclipse compare editor, the second opens the Git Tree Compare View.

Furthermore, it is possible to select any number of commits and right-click Open to see all versions of the file corresponding to the selected commits (one editor will be opened per version).

If the current input is not a file, then there won't be menu actions for Open. However, it is possible to double-click on an entry the Revision Detail area. If compare mode is active, a compare editor will be opened showing the changes for the file being double-clicked in the currently selected commit (i.e. a diff of the file content in the currently selected commit against the file content of this commit's ancestor). If compare mode is not active, an editor with the file content corresponding to the currently selected commit is shown.

Image:Egit-0.9-history-view-openAndCompareFromDetails.png

Working with the Filter Settings

The filter settings can be changed using the corresponding toolbar actions (see below). By default, the "Resource" setting is active, i.e. only those commits are shown in the list that contain changes for the current input. If the current input is not a file, all commits are shown that contain changes for any child of the current input.

If the filter setting is "Resource" and the current input is a file, then the list of commits contains only those commits that contain changes for that file. This is useful when analyzing the history of that file. In some cases, however, it is helpful to also see other commits which do not change the actual file. For example, it may be interesting to see whether a given change in the file was before or after some other commit which does not change that file itself. In our example, we might want to know whether a given change was "before" or "after" the commit tagged as "Project1". By changing the filter setting from "Resource" to "Repository", this is easily done:

Image:Egit-0.9-history-view-filtersettings.png

The behavior of the other two settings ("Folder" and "Project") is similar in that they include the commits that change any resource in the parent folder of the current input or any resource in the project of the current input, respectively. In our example above, if filter setting "Project" would be used, the commit "Add Project2 to Repository" would not be shown, is it doesn't change anything in the project of the current input (Project1/f1/file1.txt).

Alternatively, in order to see all commits pertaining to a specific project, one could change the history view input to that project. However, the file-specific menu actions would then not be available.

Toolbar actions

The first four buttons in the History View's toolbar are the standard buttons for Refresh, Link with Selection, Pinning and Navigation History.

Find

If the "Find" toolbar button is down, a search bar is displayed in the lower part of the view which allows to search for commits in the commit log. Depending on the setting in the drop-down list in the search bar the commit's title, comment, author or committer are searched.

The found search hits are high-lighted in bold and the "Next" and "Previous" buttons allow to jump to the next or previous commit matching the search criteria:

Image:Egit-0.9-history-view-search.png

Filter settings

The next four toggle buttons in the view toolbar control how the displayed commits are filtered with respect to the current input: Image:Egit-0.9-history-view-config.png The buttons are working as radio buttons, i.e. one of the four buttons must always be down.

  • If the "Repository" button is down, the commit log is not filtered and shows all commits reachable from the currently checked out branch (or all commits, see below about the "All Branches" action)

  • If the "Project" button is down, the commit log is filtered to show all commits which affected any of the resources in the project containing the current input

  • If the "Folder" toggle is down, the commit log is filtered to show all commits which affected any of the resources in the parent folder of the current input

  • If the "Resource" button is down, the commit log is filtered to show only commits which affected the current input; the view menu item Show > Follow Renames allows to toggle whether renames of the selected resource should be followed by this filter

Note that not all combinations of filter setting and current input are meaningful; for example, if the current input is a project, the "Project" option is in fact the same as the "Resource" option.

Compare Mode

Image:Egit-0.9-history-view-comparemode.png

The next button is again a toggle, activating "Compare Mode". If it is down, certain double-click actions (see above) will open a compare editor instead of a normal editor.

All Branches

Image:Egit-0.9-history-view-allbranches.png

This toggle activates the "All Branches" mode. By default, only those commits are shown in the commit log that can be reached from the currently checked out commit, i.e. the Commit Graph ends with the currently checked out commit and newer commits are not shown. If this button is down, all commits will be shown in the commit log. This is illustrated in the following picture from our example. The branch "beforeSplit" is currently checked out; by activating the toggle, the newer branches will become visible:

Image:Egit-0.9-history-view-allbranchesToggle.png

View Menu actions

Configuring the View

Most of the toolbar actions are available in the View Menu, too. In addition, the following toggles are available:

Image:Egit-3.1-HistoryViewSettings.png

and the Filter submenu allows to configure filter settings

Image:Egit-3.1-HistoryViewSettingsFilter.png

"Additional Refs" toggles the visibility of certain Refs created during actions like fetch, rebase, merge, for example FETCH_HEAD, ORIGIN_HEAD... This can be helpful to remove clutter from the history view.

"Notes History" toggles the displaying of Gerrit's review notes branch/ref in the History view

"Follow Renames" toggles whether renames of a selected resource should be followed in the History View, if the "Resource" filter is used. This preference can also be configured in the preference wizard Preferences > Team > Git > History > Follow Renames.

"Revision Comment" toggles the visiblity of the Revision Comment area.

"Revision Details" toggles the visibility of the Revision Detail area.

If "Relative Dates" is checked, the commit dates are shown as relative dates instead of absolute dates.

"E-mail Adresses" toggles the display of committer e-mails.

The sub-menu "In Revision Comment" opens a sub-menu with some more toggles that govern the appearance of the Revision Comment area:

"Tag sequence" allows to show/hide a couple of lines indicating the last tag in the list of ancestors of the given commit and the next tag in the list of successors of the given commit, i.e. the tags preceding/following the given commit.

The "Wrap Comments" and "Fill paragraphs" toggles govern the formatting within the Revision Comment area.

"Revision Details" and "Revision Comments" are also available by right-clicking anywhere in the Commit Graph area.

"Tag sequence", "Wrap Comments" and "Fill paragraphs" are also available by right-clicking anywhere in the Revision Comment area.

Context Menu actions

The context menu in the Commit Graph area is slightly different, depending on whether the current is a File or a Folder/Project, respectively. The following menu entries are always available:

Image:Egit-1.2-historyview-menu.png

If the current input is a File, there are some other actions available; if exactly one commit is selected, there are three additional options:

Image:Egit-1.2-historyview-file-menu.png

and if exactly two commits are selected, the menu will appear like this:

Image:Egit-1.2-historyview-2files-menu.png

If more than two commits are selected, only the "Open" action and the "Quickdiff" menu will be available.

Compare with working tree

This action is only available if the current input is a file and a single commit is selected. It will open a compare editor comparing the file content of the selected commit with the file content in the working tree.

Compare with each other

This action is only available if the current input is a file and exactly two commits are selected. It will open a compare editor comparing the file content of the selected commits with each other.

Open

This action is only available if the current input is a file. It will open an editor for each selected commit displaying the content of the file for the given commit.

Checkout

This checks out the currently selected commit. If a branch exists for this commit, the branch is checked out, if more than one branch exists for this commit, a dialog will be shown asking which branch should be checked out. If no branches exist for the commit, the commit will be checked out and HEAD will become detached.

Create Branch

Creates a branch on the currently selected commit. A dialog will be shown asking for a branch name and whether the newly created branch should be checked out.

Delete Branch

This action will be enabled if a branch exists for the currently selected commit, which is not checked out. If there is a single branch on this commit, which is not checked out, this action will delete this branch immediately. If multiple such branches exist, a dialog will be shown asking which branches should be deleted. If commits become unreachable on "Delete Branch" a confirmation dialog will be shown to prevent accidental unreachability of commits.

Create Tag

Creates a tag on the currently selected commit. A dialog will be shown asking for a tag name and a tag message.

Create Patch

This action is not available on the very first commit of a Repository. It will create a patch containing the changes of the currently selected commit compared to that commit's predecessor. A dialog will be shown asking whether the patch should be created as file or in the clipboard and whether to use the Git patch format of the generic patch format.

Cherry Pick

Applies the change introduced by the selected commit on top of the currently checked out commit.

Revert Commit

Reverts the changes that the selected commit introduces by creating a new commit on top of the currently checked out commit.

Merge

Merges the selected commit into the currently checked out branch.

Rebase on top of

Rebases the currently checked out branch on top of the selected commit.

Reset > Soft/Mixed/Hard

This action resets the Repository containing the current input to the currently selected commit. Depending on the choice of the sub-menu, a soft, mixed, or hard reset will be performed.

Quickdiff > Reset Quickdiff Basline to HEAD
Quickdiff > Reset Quickdiff Basline to first parent of HEAD

These two actions set the quickdiff basline for the repository to HEAD or to the parent of HEAD. These actions are always available, even if more than one commit is selected.

Quickdiff > Set as Baseline

This action is only available if a single commit is selected; it will st the quickdiff baseline for the repository to the selected commit.

Copy

Copies the IDs of the currently selected commit or commits into the clipboard.

Show Revision Comment

Toggles the visibility of the Revision Comment area.

Show Revision Details

Toggles the visibility of the Revision Details area.

Wrap Comments

Only available when right-clicking on the Revision Comment area. If active, the comments will be auto-wrapped to fill the display area, otherwise the wrapping of the commit message will be used.

Fill Paragraphs

Only available when right-clicking on the Revision Comment area. If active, the commit message will be displayed without unnecessary line breaks.

Drag and Drop Support

You may drag and drop commits from the commit graph either onto a Mylyn Task or into a folder on your harddisk. In both cases, EGit will automatically create a patch you may attach to a bug or store on disk.

Working with the Revision Details Area

The Revision Details Area shows a table of the files that were changed by the selected commit. Selecting the context menu action Show Annotations on selected files will open the file in a (read-only) editor and display an annotation ruler with commit and author information for each line in a file. See this section.

Synchronize View

The menu command Team > Synchronize Workspace will launch the Synchronize View. This view allows you to inspect the differences between the resources in the local workspace and a local or remote tracking branch. Alternatively you may compare a local and a remote tracking branch. Comparison of two remote tracking branches as well as menu commands on the Synchronize View are not yet available in this EGit version and will be provided in a future release.

Here is what the Git Synchronize View looks like:

Image:Egit-0.9-synchronize-overview.png

Synchronization State

The Synchronize View shows the synchronization state of resources in your workspace or a local branch compared to those in another local or remote tracking branch representing the state of a branch from a remote repository. This state is shown by using icons and can also be configured to show the state as text appended to the resource name.

Image:Egit-0.9-synchronize-overview-labels.png

A description of the icons is shown in the table below:

Icon Description
Image:Egit-0.9-synchronize-incoming-add.png An incoming addition means that a resource has been added to the target branch.
![Image:Egit-0.9-synchronize-incoming-change.png]images/Egit-0.9-synchronize-incoming-change.png "Image:Egit-0.9-synchronize-incoming-change.png") An incoming change means that the file has changed in the target branch.
Image:Egit-0.9-synchronize-incoming-deletion.png An incoming deletion means that a resource was deleted from the target branch.
Image:Egit-0.9-synchronize-outgoing-add.png An outgoing addition means that the file was added to your workspace or source branch and is not yet in the target branch.
Image:Egit-0.9-synchronize-outgoing-change.png An outgoing change means that the file was changed in your workspace or source branch.
Image:Egit-0.9-synchronize-outgoing-delete.png An outgoing deletion is a resource that has been deleted in your workspace or source branch.
Image:Egit-0.9-synchronize-conflict-add.png A conflicting addition means that the resource has been added in your workspace or source branch and in the target branch.
Image:Egit-0.9-synchronize-conflict-modify.png A conflicting change means that the file has been changed in your workspace or local branch and in the target branch. A manual or automatic merge will be required. Also, any entries in the view that contain children that are conflicts will also be decorated with the conflict icon. This is done to make conflicts easy to find.
Image:Egit-0.9-synchronize-conflict-delete.png A conflicting deletion means that the resource was deleted in your workspace or source branch and in the target branch.

Mode

The Synchronize View can be filtered using modes using either the toolbar actions or the menu items in the view's drop down menu. Modes can be used to show only incoming, outgoing or conflicting changes.

Image:Egit-0.9-synchronize-mode.png

Models

The Synchronize View is capable of displaying different model representations of the resources. Each product may contain its own product specific representations. The Eclipse SDK comes with three models:

Workspace Model: displays a resource based model. Layout options for this model can be controlled from the Preferences dialog in the drop down menu. The layout options for the Workspace model are

Flat layout: shows all the out-of-sync resources as direct children of their project.

Tree layout: shows the resource hierarchy as it is shown in the Project Explorer.

Compress Folders: shows changes grouped by project and then by folder. This results in a hierarchy that is at most three levels deep with folder paths being compressed into a single level (similar to a Java package).

Java Model: displays a Java based model (similar to what appears in the Package Explorer). Git Commits: displays a Git Commit based model. This model shows incoming changes grouped by commit which is handy for seeing who released what and why. For outgoing changes, you can create commits by creating commits. The display format of the Git commit description can be configured in the preferences under Team > Git > Label Decorations in the tab Other.

In addition to to the models, there is also a Flat Presentation which displays all the out-of-sync elements as top level elements.

Navigation

The Synchronize view provides toolbar actions for navigating through the changes in the view. These actions not only navigate between files but also go from change to change within a file.

Image:Egit-0.9-synchronize-navigation.png

The tree in the Synchronize View can easily be expanded and collapsed from the tool bar.

Image:Egit-0.9-synchronize-expand-collapse.png

Git Tree Compare View

This view will be opened by some of the Compare With actions (see Comparing Content). When started from a resource (e.g. a project or folder), it will look similar to the resources in the workspace. However, the usual icons on the files will be replaced with icons showing the change state (added, deleted, changed, or unchanged).

The changes can be browsed and a double-click on a file will open a compare editor for this file (this only makes sense on "changed" files, in case of added or deleted files, one side of the compare editor will be empty, whereas unchanged files will show the same content on both sides of the editor):

Image:Egit-0.11-GitTreeCompareView.png

It is possible to hide unchanged files by clicking the "Hide files with equal content" button in the toolbar.

The Git Tree Compare View can also be started without having workspace resources as starting point (for example by comparing two commits in the history view when the input of the history view is a Repository and not a workspace resource). In this case, the complete content of the Repository is shown and both projects and folders appear as simple "folder" icons:

Image:Egit-0.11-GitTreeCompareViewRepo.png

Git Staging View

Image:Egit-3.1-StagingView.png

This view provides an equivalent for git status showing changes made in the working tree. Unstaged changes which have not yet been transferred to the git index are displayed in the Unstaged Changes pane, changes which have already been "added" (staged) to the Git index are shown in the Staged Changes pane. By default these panes are displayed in a row layout, which can be changed to a column layout by the Column Layout option. The Staged- and Unstaged Changes panes by default show the full path of the files. They can be configured by the Show File Names First option to show the file names first, followed by the directory that the files are located in.

Double-click modified files to open a compare view. If fired from the "unstaged" pane the compare view will show the not-yet staged changes. When fired from the "staged" pane it will display the already staged changes. To open a file in the editor, use the Open Workspace Version action on the file's context menu.

To stage a file, drag it from the Unstaged Changes pane to the Staged Pages pane. Alternatively, use the Add to Git Index action on the file's context menu in the Unstaged Changes pane. The Replace with File in Git Index action will replace the selected file in the working tree. If the file is unstaged, it will be reset. If it is staged, the working tree version will be replaced with the staged version from the Git index.

To unstage a file, drag it from the Staged Changes pane to the Unstaged Changes pane. Alternatively, use the Remove from Git Index action on the file's context menu.

The commit action will commit the staged changes only -- similar to what git commit does in native git. An integrated commit message editor allows to edit the commit message for the commit. In contrast to the commit dialog, the staging view can be kept open while doing changes. This allows for incrementally writing the commit message along with the changes. The commit message being edited is associated with the repository, the staging view is linked with. It is not stored persistently and will get lost if the staging view or Eclipse are closed.

To commit, press Ctrl+Enter (Command+Enter on Mac OS X) in the commit message text field, or click on the Commit or Commit and Push button.

The Staging View's view menu allows to configure the Staging View

Image:Egit-3.1-StagingViewSettings.png

If you are working on a large change and many files are displayed in the Staging View you may use the "Filter Files" filter field which will filter the content of the Staging View to only show the files matching the filter you entered.

Image:Egit-3.1-StagingViewFilterFiles.png

Partial Staging

Sometimes it's useful to commit only some changes of a file. An example is when working on a feature and noticing a typo or small bug, which is unrelated to the feature.

To commit only certain changes, these changes have to be staged first. To do this, double-click on the file in the Unstaged Changes pane. This will open the compare editor. On the left side is the workspace version, on the right is the index (staged) version.

Both sides of the compare editor are editable. When changing something in the right side (index) and saving, the file will turn up in the Staged Changes pane and when committing, exactly that content will be committed.

To stage a group of changed lines, the Copy Current Change from Left to Right toolbar button (arrow icon) can be used.

Git Reflog View

Image:Egit-1.2-reflog-view.png

The Reflog View shows the Git reflog for a selected repository. It supports showing the reflog for a specific branch by selecting the hyperlink ref name in the top right of the view. Double-clicking or selecting the context menu action Open in Commit Viewer on a reflog entry opens the corresponding commit in the commit viewer. The context menu action Checkout will checkout the selected commit and the HEAD will become detached.

Git URLs

Git URLs in general consist of transport protocol scheme, address of the remote server and the repository path within the remote server and for some authenticating protocols also the user ID.

EGit supports the following protocols

Git URLs are used when

HTTP(S) connections

EGit provides two ways to connect to http or https URLs:

  • via the Java built-in http(s) implementation, or
  • via the Apache httpclient Java library.

The user can choose between these two in the main Git preferences. The default is to use the Apache httpclient library.

Using the Apache httpclient library, it is possible to connect to a https git URL via an http proxy. The Java built-in http support does not allow this.

EGit supports the BASIC, DIGEST, and NEGOTIATION (Kerberos) authentication schemes. (Kerberos needs non-trivial setup for the JDK/JRE outside of EGit, though; if you work in an environment where this is used, your system administrator should have done all the necessary things already.)

Some git servers, most notably Microsoft TFS and its successors, are sometimes configured to require NTLM authentication. EGit does not support this proprietary authentication scheme. If you need NTLM authentication, try choosing the Java built-in http support, and set the Java system property -Djdk.http.ntlm.transparentAuth=allHosts. One way to set this system property for Eclipse is to include it in the eclipse.ini file.

SSH connections

By default EGit uses the Apache MINA sshd Java library for SSH connections. If environment variable GIT_SSH is set, it should be the path of an SSH executable on your system, and EGit will use that instead of its built-in Java SSH client.

The Java SSH client tries to be as compliant to OpenSSH as possible. A few differences exist in the handling of the SSH configuration file ~/.ssh/config, though; in particular, the Match and Include directives are not supported. ProxyCommand is not supported, but ProxyJump is. GlobalKnownHostsFile is ignored.

Eclipse lets the user define the SSH_HOME directory in the preferences under Preferences→General→Network Connections→SSH2, field "SSH2 home". Setting this to anything else but .ssh in your user home directory is going to be confusing, since it'll mean that EGit may use other settings than your command-line utilities. It is strongly recommended to set this path to .ssh in your user home directory.

Git References

Git References are also known shortly as Refs. They comprise

  • branches
  • remote-tracking branches
  • tags

They all are named with a path using '/' as path separator and are starting with "refs".

  • Local branches start with "refs/heads/"
  • Remote tracking branches start with "refs/remotes/". Remote tracking branches proxy branches located in a remote repository so that their state at the time of the last transport operation can be queried also when no connection to the repository is available (offline).
  • Tags start with "refs/tags/"

Ref names can be abbreviated as long as the abbreviated form is unique. E.g.

  • "master" is short for "refs/heads/master"
  • "origin/master" is short for "refs/remotes/origin/master"
  • "v1.0.1" is short for "refs/tags/v1.0.1"

There is also a number of "reserved" names for Refs that are useful for certain scenarios:

Ref Name Remark
HEAD Points to the currently checkout out commit
FETCH_HEAD Points to the result of the last fetch operation
ORIG_HEAD Points to the commit that was checked out before a merge or rebase operation was started

For a complete list for Ref names and the order of precedence if multiple references have the same shorthand form see the section "Specifying Revisions" section of git rev-parse.

Refspecs

A "refspec" is used by fetch and push operations to describe the mapping between remote Ref and local Ref. Semantically they define how local branches or tags are mapped to branches or tags in a remote repository. In native git they are combined with a colon in the format :, preceded by an optional plus sign, + to denote forced update. In EGit they can be displayed and also edited in tabular form in the Push Ref Specification and the Fetch Ref Specification and other dialogs.

The "left-hand" side of a RefSpec is called source and the "right-hand" side is called destination. Depending on whether the RefSpec is used for fetch or for push, the semantics of source and destination differ: for a Push RefSpec, the source denotes a Ref in the source Repository and the destination denotes a Ref in the target Repository.

Push Refspecs

A typical example for a Push RefSpec could be

HEAD:refs/heads/master

This means that the currently checked out branch (as signified by the HEAD Reference, see Git References) will be pushed into the master branch of the remote repository.

Fetch Refspecs

A typical example for a Fetch RefSpec could be

refs/heads/*:refs/remotes/origin/*

This means that all branches from the remote repository will be fetched into the corresponding remote tracking branches of the local repository.

Remotes

Remotes are used to manage the repositories ("remotes") whose branches you track from your repository.

In EGit Remotes are defined when

A Remote first of all defines a name for the repository whose branches you track, this is important since you may want to track branches from different repositories so the name helps to understand what repository a certain operation is dealing with. In addition Refspecs specified for a given Remote define a mapping of branches and tags in your local repository to branches and tags in the remote repository. You may want to use different mappings for inbound or outbound transport operations hence there are editors to define Fetch and Push Configurations available in EGit.

Git Ignore

.gitignore files located in the working tree specify files that intentionally should not be tracked by git. They only concern files that are not yet tracked by git. In order to ignore uncommitted changes in already tracked files refer to the assume unchanged action.

Each line in .gitignore files defines a pattern. Git checks ignore patterns following the hierarchy of the working tree from highest to lowest. Patterns defined in higher level .gitignore files are overridden by those defined in lower levels. Files which shall be ignored for all working on a given project are usually included in the project's repository to easily share them in the team.

Pattern format definition:

  • blank lines are ignored
  • lines starting with # serve as comments
  • the optional prefix ! negates the pattern. Files excluded by a matching previous pattern become included again. Patterns ending with a slash only match directories but not files or symbolic links.
  • patterns not containing a slash are treated as shell glob patterns matched against the path relative to the location of the .gitignore file
  • git treats patterns as shell globs as defined in fnmatch(3)
  • wildcards in patterns do not match / in path names
  • a leading slash matches the beginning of a pathname

The EGit Ignore menu action adds the selected resource to the .gitignore file in the resource's parent directory. To enter other ignore patterns use a text editor.

Clone this wiki locally