is improved web interface working?

[ElGranPepo]

Thank you for such a great project!

I am able to first boot the device, see the web interface and set up WIFI. I am now seeing the device in my network but there is not web interface nor is the device pinging back. any advise?
I saw that commit #21 was for an updated web interface. thanks

[ecodina]

Hi. TBH, I haven't tried, since my hunter is in a remote area and I don't have easy access to update it. Maybe you could try an older release to see if that fixes it for you.

[wrongisthenewright]

Thank you for such a great project!

I am able to first boot the device, see the web interface and set up WIFI. I am now seeing the device in my network but there is not web interface nor is the device pinging back. any advise? I saw that commit #21 was for an updated web interface. thanks

Hi, I had the same problem, I goggled for a solution and i was able to solve using platformio with the target option to upload the data folder to the WeMos fs.
You should do it after the erase and flash procedure.

[loopy321]

I too had difficulty upgrading from pre 1.0.0 version using the precompiled .bin.
Ended up I needing to:

1. "Erase flash" in vscode (otherwise got stuck in reboot cycles where it would connect to wifi from prior settings carried over.
2. Modify line 65 of main.cpp to add: MqttSettings.enable = true; (captive portal was not passing this value correctly).
3. Upload via vscode
4. in PlatforomIO CLI do: pio run --target uploadfs
5. Configure wifi and mqtt via captive portal

Now it appears to work. Thanks!

[wrongisthenewright]

I've tried your mod but at the first try it didn't work

2. Modify line 65 of main.cpp to add: `MqttSettings.enable = true;` (captive portal was not passing this value correctly).

Can you, please, be more clear here?
Do you replace the line 65

doc["mqtt_enable"] = MqttSettings.enable;

or you inserted above the existing line 65

MqttSettings.enable = true;

On a spare Wemos I've been able to connect to MQTT (on another broker and SSID) without boot loop, but on the wemos I have connected to my watering systems it doesn't work. MQTT explorer sees mosquitto so I don't think is a mqtt issue.
TY