You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Apr 16, 2023. It is now read-only.
I attempted to upgrade both my Jumper T-Lite and Radiomaster TX16S from 2.5.0RC3 to 2.5.0 today. The T-Lite upgraded fine but despite the TX16S DFU device appearing in lsusb I could not flash it from flasher:
Opening DFU capable USB device...
ID 0483:df11
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuERROR, status = 10
dfuERROR, clearing status
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 2048
DfuSe interface name: "Internal Flash "
Downloading to address = 0x08000000, size = 1329740
Download [ ] 0% 0 bytesdfu-util: ERASE_PAGE not correctly executed
This is on Linux, T-Lite working fine but had to copy file to SDcard and use bootloader to flash the TX16S. DFU would be nice and it's much quicker and easier.
The text was updated successfully, but these errors were encountered:
I attempted to upgrade both my Jumper T-Lite and Radiomaster TX16S from 2.5.0RC3 to 2.5.0 today. The T-Lite upgraded fine but despite the TX16S DFU device appearing in
lsusb
I could not flash it from flasher:This is on Linux, T-Lite working fine but had to copy file to SDcard and use bootloader to flash the TX16S. DFU would be nice and it's much quicker and easier.
The text was updated successfully, but these errors were encountered: