Raspberry Pi WIFI setup
Get your headless Raspian into your WIFI without the Console
You can setup the wireless LAN of your headless Raspberry PI in just three steps.
Download the BerryLan flavoured Raspbian image and flash the SD Card. We recommend Etcher to do that.
Insert the SD Card and power on your Raspberry Pi. All you need is your Raspberry and a power supply.
Install the BerryLan iOS or Android App and follow the instructions. That's it, have fun!
Everything is like you are used to - we just add BerryLan.
The app displays you the IP Address at the end of the setup process.
The app tells you if there might be an issue with the WLAN.
We love Open Source & Qt. Contribute here.
Add the nymea repository to your system:
echo "deb http://repository.nymea.io stretch main raspbian" | sudo tee /etc/apt/sources.list.d/nymea.list
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-key A1A19ED6
Configure apt to prefer packages from the raspbian section of the repository
Note: the Raspberry Pi Zero W requires packages from the
raspbiansection, since they are not plainarmhf, but specially built for all Raspberry Pi versions. If you are on Raspberry Pi 2/3 you can skip this step.
nano /etc/apt/preferences.d/nymea
Add following lines to the file:
Package: *
Pin: release c=raspbian
Pin-Priority: 700
Package: *
Pin: origin repository.nymea.io c=main
Pin-Priority: 500
Install the dependencies:
sudo apt-get update
sudo apt-get install nymea-networkmanager dirmngr
Disable dhcpcd:
sudo systemctl disable dhcpcd
reboot
Thats it! Have fun with BerryLan!