Skip to content

A command-line file manipulation tool and disassembler

License

Notifications You must be signed in to change notification settings

emaculation/cxmon

Repository files navigation

cxmon

A command-line file manipulation tool and disassembler

Platform CI Status
AmigaOS � unclear �
BeOS � unclear �
FreeBSD � unclear �
Linux Linux Build Status
OSX OSX Build Status
Windows Windows Build status

Copyright (C) 1997-2007 Christian Bauer, Marc Hellwig

GNU binutils disassemblers Copyright (C) 1988, 89, 91, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.

License

cxmon is available under the terms of the GNU General Public License. See the file "COPYING" that is included in the distribution for details.

Overview

cxmon is an interactive command-driven file manipulation tool that is inspired by the "Amiga Monitor" by Timo Rossi. It has commands and features similar to a machine code monitor/debugger, but it lacks any functions for running/tracing code. There are, however, built-in PowerPC, 680x0, 80x86, x86-64, 6502 and Z80 disassemblers and special support for disassembling MacOS code. By default, cxmon operates on a fixed-size (but adjustable) memory buffer with addresses starting at 0.

Installation

cxmon uses CMake.

$ cmake .
$ make
$ make install

Usage

cxmon can be started from the Shell or from the Tracker (BeOS), but command line history doesn't work when started from the Tracker.

Options:

  • -m enables symbolic MacOS A-Trap and low memory globals display in the 680x0 disassembler
  • -r makes cxmon operate in real (virtual) memory space instead of an allocated buffer

If no additional command line arguments are given, cxmon enters interactive mode. Otherwise, all remaining arguments are interpreted and executed as cxmon commands.

The default buffer size is 1MB.

The cxmon command prompt looks like this:

  [00000000]->

The number in brackets is the value of . (the "current address", see the section on expressions). You can get a short command overview by entering h.

Commands that create a longer output can be interrupted with Ctrl-C.

To quit cxmon, enter the command x.

Constants, variables and expressions

The default number base is hexadecimal. Decimal numbers must be prefixed with \_. Hexadecimal numbers may also be prefixed with $ for clarity. Numbers can also be entered as ASCII characters enclosed in single quotes (e.g. 'BAPP' is the same as $42415050). All numbers are 32-bit values (one word).

With the "set" command, variables can be defined that hold 32-bit integer values. A variable is referred to be its name. Variable names may be arbitrary combinations of digits and letters (they may also start with a digit) that are not also valid hexadecimal numbers. Names are case-sensitive.

cxmon accepts expressions in all places where you have to specify a number. The following operators are available and have the same meaning and precedence as in the C programming language:

Operator Meaning
~ complement
+ unary plus
- unary minus
* multiplication
/ integer division
% modulo
+ addition
- subtraction
<< shift left
>> shift right
& bitwise AND
^ bitwise exclusive OR
| bitwise inclusive OR

Parentheses may be used to change the evaluation order of sub-expressions.

There are two special symbols that can be used in expressions:

  • . represents the "current address" (the value of . is also displayed in the command prompt). What exactly the current address is, depends on the command last executed. The display commands set . to the address after the last address displayed, the "hunt" commands sets . to the address of the first found occurrence of the search string, etc.
  • : is used by the "apply" (y) command and holds the value of the byte/half-word/word at the current address.

The "modify" (:), "fill" (f) and "hunt" (h) commands require you to specify a byte string. Byte strings consist of an arbitrary number of byte values and ASCII strings separated by commas. Examples:

  "string"
  12,34,56,78,9a,bc,de,f0
  "this",0a,"is a string",0a,"with","newlines",\_10

The buffer

Those cxmon commands that operate on "memory" operate on a buffer allocated by cxmon whose size is adjustable with the @ command. The default buffer size is 1MB. The buffer is an array of bytes where each byte has a 32-bit integer address. Addresses start at 0 and are taken modulo the buffer size (i.e. for the default 1MB buffer, addresses 0 and 100000 refer to the same byte).

The buffer is the working area of cxmon where you load files into, manipulate them, and write files back from. Arbitrary portions of the buffer may be used as scratch space.

Commands

The following commands are available in cxmon ([] marks a parameter that can be left out):

Basic Commands

Cmd Name Description
x Quit cxmon quits cxmon and returns to the shell.
h Show help text displays a short overview of commands.
?? Show list of commands displays a short list of available commands.
ver Show version shows the version number of cxmon.
? expression Calculate expression displays the value of the given expression in hex, decimal, and ASCII characters. If the value is negative, it is displayed as a signed and unsigned number.
@ [size] Reallocate buffer changes the size of the buffer to size bytes while preserving the contents of the buffer. If size is omitted, the current buffer size is displayed.
: start string Modify memory puts the specified byte string string at the address start into the buffer. The value of "." is set to the address after the last address modified.
f start end string Fill memory fill the buffer in the range from start to (and including) end with the given byte string string.
y[b|h|w] start end expr Apply expression to memory works like the "fill" (f) command, but it doesn't fill with a byte string but with the value of an expression that is re-evaluated for each buffer location to be filled. The command comes in three flavors: y/yb works on bytes (8-bit), yh on half-words (16-bit) and yw on words (32-bit). The value of . is the current address to be modified, the value of : holds the contents of this address before modification. See examples below.
t start end dest Transfer memory transfers the buffer contents from start to (and including) end to dest. Source and destination may overlap.
c start end dest Compare memory compares the buffer contents in the range from start to (and including) end with the contents at dest. The addresses of all different bytes and the total number of differences (decimal) are printed.
h start end string Search for byte string searches for the given byte string string in the buffer starting at start up to (and including) end. The addresses and the total number of occurrences are displayed. The value of . is set to the address of the first occurrence.
\ "command" Execute shell command executes the given shell command which must be enclosed in quotes.
ls [args] List directory contents works as the shell command ls.
rm [args] Remove file(s) works as the shell command rm.
cp [args] Copy file(s) works as the shell command cp.
mv [args] Move file(s) works as the shell command mv.
cd directory Change current directory works as the shell command cd. The name of the directory doesn't have to be enclosed in quotes.
o ["file"] Redirect output When a file name is specified by file, all following output is redirected to this file. The file name must be enclosed in quotation marks even if it contains no spaces. Entering o without parameters closes the file and directs the output into the terminal window again.
[ start "file" Load data from file loads the contents of the specified file into the buffer starting from address start. The file name must be enclosed in quotation marks even if it contains no spaces. The value of . is set to the address after the last address affected by the l
set [var[=value]] Set/clear/show variables If no arguments are given, all currently defined variables are displayed. Otherwise, the value of var is set to the specified value. If =value is omitted, the variable var is cleared.
cv Clear all variables clears all currently defined variables.

Memory Display Commands

Each of these commands takes the arguments [start [end]] representing the start and end indexes of the buffer contents. Omitting the arguments is equivalent to specifying . as an argument (e.g. i without arguments is equivalent to i .). The value of . is set to the address after the last address displayed.

Cmd Name Description
i [start [end]] ASCII memory dump displays the buffer as ASCII characters.
b [start [end]] Binary memory dump displays the buffer in a binary format.
m [start [end]] Hex/ASCII memory dump displays the buffer as hex words and ASCII characters
d [start [end]] Disassemble PowerPC code disassembles the buffer
d65 [start [end]] Disassemble 6502 code disassembles the buffer
d68 [start [end]] Disassemble 680x0 code disassembles the buffer
d80 [start [end]] Disassemble Z80 code disassembles the buffer
d86 [start [end]] Disassemble 80x86 (32-bit) code disassembles the buffer
d8086 [start [end]] Disassemble 80x86 (16-bit) code disassembles the buffer
d8664 [start [end]] Disassemble x86-64 code disassembles the buffer

Examples

Here are some simple examples for what is possible with cxmon.

Command Effect
yw 0 fff :<<8 shifts all words in the address range 0..fff to the left by 8 bits (you can use this to convert bitmap data from ARGB to RGBA format, for example)
y 0 1234 ~: inverts all bytes in the address range 0..1234
yh 2 ff 20000/. creates a table of the fractional parts of the reciprocals of 1..7f
[ 0 "file1"
[ . "file2"
] 0 . "file3"
Join file1 and file2 to file3
[ 0 "file"
] 18 .-18 "file"
Remove the first 24 bytes (e.g. an unneeded header) of file
[ 0 "cxmon"
h 0 . 60,00,00,00
Load the cxmon executable and search for PowerPC nop commands
[ 0 "cxmon"
set size=.
h 0 . "->"
: . " $"
] 0 size "cxmon1"
Create a modified version of cxmon so that the prompt has $ instead of ->
[ 0 "file"
yh 0 .-1 :>>8|:<<8
] 0 . "file"
Convert a binary file which contains 16-bit numbers in little-endian format to big-endian format (or vice-versa)
[ 0 "bootnub.image"
d 100
Load a BeBox boot ROM image and start disassembling the system reset handler

Using cxmon in your own programs

cxmon provides a simple interface for integration in other programs. It can, for example, be used as a monitor/debugger for an emulator (it is used in Basilisk II in this way).

Here's how to do it (all functions are defined in the mon.h header file):

  1. Link all the cxmon object files, except main.o, to your program.

  2. In your program, call mon_init() before using any other cxmon functions.

  3. After calling mon_init(), set the mon_read_byte and mon_write_byte function pointers to the routines used for accessing memory.

  4. You can use mon_add_command() to add new commands to cxmon by specifying the command name, function and help text. From within your command function, you can use mon_get_token() and mon_expression() to parse the arguments and the mon_read/write\_\*() functions to access memory.

  5. To enter cxmon, call the mon() function like this:

      const char \*args[3] = {"mon", "-r", NULL};
      mon(2, args);
  6. If you're done with cxmon, call mon_exit().

History

Please consult the file "ChangeLog" for the release history.

Christian Bauer www.cebix.net

Marc Hellwig Marc.Hellwig@uni-mainz.de

About

A command-line file manipulation tool and disassembler

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published