makers-beehive

Material

• 10 plywood boards (1000x600x10mm)
• 1 PMMA sheet
• 1 Smart Citizen Kit
• 1 25W 12V solar panel
• 1 Raspberry Pi 3 + PiCam
• 1 30000mAh battery pack
• 1 40 Ohms 10W resistor
• 4 load sensors
• 1 12V/5V DC Converter

Machines

• 1 laser cut
• 1 3d printer
• 1 soldering iron

Step 1 - fab the parts

You need to cut in 10mm plywood boards theses parts with a laser cutter. We use a Trotec Speedy 400 at makers lab.

laser cut settings we use : P100 V0,25 Hz2000
It will take you about 3 hours of cutting :
plate 1 : 00:14:09
plate 2 : 00:16:30
plate 3 : 00:14:47
plate 4 : 00:14:47
plate 5 : 00:15:44
plate 6 : 00:15:44
plate 7 : 00:13:35
plate 8 : 00:12:25
plate 9 : 00:17:05
plate 10 : 00:16:30

Step 2 - Assemble the body of the hive

Assemble the footer:

Assemble the chamber:

Assemble the storeyed case:

Assemble the roof top:

Step 3 - Assemble electronics parts

assemble electronics case:

push code into Pi + SCK:
You can find on emlyon/makers-beehives-hardware all the code for electronics.

Step 4 - Dashboard

See on emlyon/makers-beehives-website how we made our dashboard.