Merge branch 'dev_' into dev_no_master_thermostat

CHANGELOG.md

@@ -5,6 +5,76 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+# [3.3.1] January 20 2022
+
+- lastcode broke MQTT JSON structure [#228](https://github.com/emsesp/EMS-ESP32/issues/228)
+- overlapping while reading sequence of EMS1.0 telegrams
+- redundant telegram readings (because of offset overflow)
+- added missing RC30/Moduline400 [#243](https://github.com/emsesp/EMS-ESP32/issues/243)
+- check received status before toggling fetch on empty telegram [#268][#282]
+
+# [3.3.0] November 28 2021
+
+## Added
+
+- Add system commands for syslog level and watch [#98](https://github.com/emsesp/EMS-ESP32/issues/98)
+- Added pool data to telegrams 0x494 & 0x495 [#102](https://github.com/emsesp/EMS-ESP32/issues/102)
+- Add RC300 second summermode telegram [#108](https://github.com/emsesp/EMS-ESP32/issues/108)
+- Add support for the RC25 thermostat [#106](https://github.com/emsesp/EMS-ESP32/issues/106)
+- Add new command 'entities' for a device, e.g. http://ems-esp/api/boiler/entities to show the shortname, description and HA Entity name (if HA enabled) [#116](https://github.com/emsesp/EMS-ESP32/issues/116)
+- Support for Junkers program and remote (fb10/fb110) temperature
+- Home Assistant `state_class` attribute for Wh, kWh, W and KW [#129](https://github.com/emsesp/EMS-ESP32/issues/129)
+- Add current room influence for RC300 [#136](https://github.com/emsesp/EMS-ESP32/issues/136)
+- Added Home Assistant device_class to sensor entities
+- Added another Buderus RC10 thermostat with Product ID 65 [#160](https://github.com/emsesp/EMS-ESP32/issues/160)
+- Added support for mDNS [#161](https://github.com/emsesp/EMS-ESP32/issues/161)
+- Added last system ESP32 reset code to log (and `system info` output)
+- Firmware Checker in WebUI [#168](https://github.com/emsesp/EMS-ESP32/issues/168)
+- Added new MQTT setting for enabling 'response' topic
+- Support for non-standard Thermostats like Tado [#174](https://github.com/emsesp/EMS-ESP32/issues/174)
+- Include MQTT connection status in 'api/system/info'
+- Include Network status in 'api/system/info' and also the MQTT topic `info` [#202](https://github.com/emsesp/EMS-ESP32/issues/202)
+- Added Ethernet PHY module as an option in the Board Profile [#210](https://github.com/emsesp/EMS-ESP32/issues/210)
+
+## Fixed
+
+- MQTT reconnecting after WiFi reconnect [#99](https://github.com/emsesp/EMS-ESP32/issues/99)
+- Manually Controlling Solar Circuit [#107](https://github.com/emsesp/EMS-ESP32/issues/107)
+- Fix thermostat commands not defaulting to the master thermostat [#110](https://github.com/emsesp/EMS-ESP32/issues/110)
+- Enlarge parse-buffer for long names like `cylinderpumpmodulation`
+- MQTT not subscribing to all device entities [#166](https://github.com/emsesp/EMS-ESP32/issues/166)
+- Help fix issues with WebUI unable to fully load UI over Ethernet [#177](https://github.com/emsesp/EMS-ESP32/issues/177)
+- Shower alert never reset after limit reached when enabled [(PR #185)]
+- Remove HA entity entries when a device value goes dormant [#196](https://github.com/emsesp/EMS-ESP32/issues/196)
+- deciphering last error code dates on 0xC2 telegram [#204](https://github.com/emsesp/EMS-ESP32/issues/204)
+
+## Changed
+
+- Syslog BOM only for utf-8 messages [#91](https://github.com/emsesp/EMS-ESP32/issues/91)
+- Check for KM200 by device-id 0x48, remove tx-delay [#90](https://github.com/emsesp/EMS-ESP32/issues/90)
+- rename `fastheatupfactor` to `fastheatup` and add percent [#122](https://github.com/emsesp/EMS-ESP32/issues/122)
+- "unit" renamed to "uom" in API call to recall a Device Value
+- initial backend React changes to replace the class components (HOCs) with React Hooks
+- Use program-names instead of numbers
+- Boiler's maintenancemessage always published in MQTT (to prevent HA missing entity)
+- Unit of Measure 'times' added to MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
+- Improved API. Restful HTTP API works in the same way as MQTT calls
+- Removed settings for MQTT subscribe format [#173](https://github.com/emsesp/EMS-ESP32/issues/173)
+- Improve Nefit Moduline 200 functionality [#183](https://github.com/emsesp/EMS-ESP32/issues/183)
+- `status` in the MQTT heartbeat renamed to `bus_status`
+- Layout changes in the WebUI, showing stripped table rows in Dashboard
+- Alternative font for log window [#219](https://github.com/emsesp/EMS-ESP32/issues/219)
+
+## **BREAKING CHANGES**
+
+- API: "unit" renamed to "uom" in API call to recall a Device Value
+- HA: `sensor.boiler_boiler_temperature` renamed to `sensor.actual_boiler_temperature`
+- HA: `binary_sensor.boiler_ww_disinfecting` renamed to `binary_sensor.boiler_ww_disinfection`
+- HA: # removed from counts in MQTT Fails, Rx fails, Rx received, Tx fails, Tx reads & Tx writes
+- `txread` renamed to `txreads` and `txwrite` renamed to `txwrites` in MQTT heartbeat payload
+- 'dallas sensors' in api/system/info moved to the "System" section. Renamed "uptime (seconds)" and "reset reason"
+- `status` in the MQTT heartbeat renamed to `bus_status`
+
 # [3.2.1] August 8 2021
 
 ## Added

CHANGELOG_LATEST.md

@@ -26,6 +26,15 @@
 - remove MQTT retained configs if discovery is disabled
 - timeout 10 min for MQTT-QoS wait
 - Moduline 300 auto-temperatures T1-T4, RC300 romminfluencefactor
+- RC35 parameters [#392](https://github.com/emsesp/EMS-ESP32/issues/392), [#398](https://github.com/emsesp/EMS-ESP32/issues/398)
+- sync time with thermostat [#386](https://github.com/emsesp/EMS-ESP32/issues/386), [#408](https://github.com/emsesp/EMS-ESP32/issues/408)
+- set mode has immediate effect [#395](https://github.com/emsesp/EMS-ESP32/issues/395)
+- min/max in web value setting
+- Extend customization to select if an entity is to be shown in the WebUI or forced as read-only [#317](https://github.com/emsesp/EMS-ESP32/issues/317)
+- Added Moduline 400 installation parameters [PR #449 by @kwertie01](https://github.com/emsesp/EMS-ESP32/pull/449)
+- Read time from IVT-controller [#439](https://github.com/emsesp/EMS-ESP32/issues/439)
+- Hybrid Heatpump product-id 168 [#459](https://github.com/emsesp/EMS-ESP32/issues/459), thermostat settings
+- Junkers ISM2 and IPM in warm water mode [#437](https://github.com/emsesp/EMS-ESP32/issues/437)
 
 ### Fixed
 
@@ -43,6 +52,7 @@
 - Non-nested MQTT would corrupt the json [#354](https://github.com/emsesp/EMS-ESP32/issues/354)
 - Burner selected max power can have a value higher than 100% [#314](https://github.com/emsesp/EMS-ESP32/issues/314)
 - some missing fahrenheit calculations
+- limited number of exclusions [#339](https://github.com/emsesp/EMS-ESP32/issues/339)
 
 ### Changed
 
@@ -59,6 +69,9 @@
 - removed system/pin command, new commands in analogsensors
 - system/info device-info split to name/version/brand
 - remove master-thermostat
+- exclude list uses short-names, possible flags for web/api/mqtt excludes, readonly and favorite (selection not yet implemented)
+- thermostat clock formate date-time: dd.mm.yyyy hh:mm
+- RC300 summermode as other thermostats `winter/summer` instead of `off/on`
 
 ## **BREAKING CHANGES:**
 

README.md

@@ -15,6 +15,7 @@ This project is the specifically for the ESP32. Compared with the previous ESP82
 [![version](https://img.shields.io/github/release/emsesp/EMS-ESP32.svg?label=Latest%20Release)](https://github.com/emsesp/EMS-ESP32/blob/main/CHANGELOG.md)
 [![release-date](https://img.shields.io/github/release-date/emsesp/EMS-ESP32.svg?label=Released)](https://github.com/emsesp/EMS-ESP32/commits/main)
 [![license](https://img.shields.io/github/license/emsesp/EMS-ESP32.svg)](LICENSE)
+[![Quality Gate Status](https://sonarcloud.io/api/project_badges/measure?project=emsesp_EMS-ESP32&metric=alert_status)](https://sonarcloud.io/summary/new_code?id=emsesp_EMS-ESP32)
 [![Codacy Badge](https://app.codacy.com/project/badge/Grade/9441142f49424ef891e8f5251866ee6b)](https://www.codacy.com/gh/emsesp/EMS-ESP32/dashboard?utm_source=github.com&utm_medium=referral&utm_content=emsesp/EMS-ESP32&utm_campaign=Badge_Grade)
 [![downloads](https://img.shields.io/github/downloads/emsesp/EMS-ESP32/total.svg)](https://github.com/emsesp/EMS-ESP32/releases)
 [![chat](https://img.shields.io/discord/816637840644505620.svg?style=flat-square&color=blueviolet)](https://discord.gg/3J3GgnzpyT)

factory_settings.ini

@@ -38,7 +38,7 @@ build_flags =
     -D FACTORY_MQTT_PASSWORD=\"\"
     -D FACTORY_MQTT_CLIENT_ID=\"ems-esp\"
     -D FACTORY_MQTT_KEEP_ALIVE=60
-    -D FACTORY_MQTT_CLEAN_SESSION=true
+    -D FACTORY_MQTT_CLEAN_SESSION=false
     -D FACTORY_MQTT_MAX_TOPIC_LENGTH=128
 
     ; JWT Secret