added new profile and archive folder to keep things cleaner

MK2/Slic3r/Pretty PLA V3.ini

@@ -0,0 +1,215 @@
+# generated by Slic3r Prusa Edition 1.41.0-beta+ on 2018-08-16 at 11:52:06
+avoid_crossing_perimeters = 0
+bed_shape = 0x0,250x0,250x210,0x210
+bed_temperature = 65
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n\n\n\n\n
+between_objects_gcode = 
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4";
+complete_objects = 0
+cooling = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_acceleration = 1000
+default_filament_profile = "Prusa PLA"
+default_print_profile = 0.15mm OPTIMAL MK3
+deretract_speed = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 0
+duplicate_distance = 6
+elefant_foot_compensation = 0
+end_filament_gcode = "; Filament-specific end gcode"
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 F1000.0 ; set feed rate\nG1 E-3 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; home X axis\n\nM84 ; disable motors\n\n\n
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.42
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_loading_move = -2
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_colour = #00FFFF
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 0.95
+extrusion_width = 0.42
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_max_volumetric_speed = 15
+filament_minimal_purge_on_wipe_tower = 5
+filament_notes = "List of materials tested with standard PLA print settings for MK3:\n\n\nEsun PLA\nPush PLastic PLA\nInland PLA\n3DXTech PLA"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = "Chris Pretty PLA"
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+fill_angle = 45
+fill_density = 5%
+fill_pattern = rectilinear
+first_layer_acceleration = 1000
+first_layer_bed_temperature = 65
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+first_layer_temperature = 215
+gap_fill_speed = 50
+gcode_comments = 0
+gcode_flavor = marlin
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.42
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+infill_speed = 100
+inherits_cummulative = "0.20mm FAST MK3";;"Original Prusa i3 MK3"
+interface_shells = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n
+layer_height = 0.2
+machine_max_acceleration_e = 1000,5000
+machine_max_acceleration_extruding = 1500,1250
+machine_max_acceleration_retracting = 1200,1250
+machine_max_acceleration_x = 4000,1000
+machine_max_acceleration_y = 4000,1000
+machine_max_acceleration_z = 400,200
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 1,2.5
+machine_max_jerk_x = 6,10
+machine_max_jerk_y = 6,10
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_fan_speed = 100
+max_layer_height = 0
+max_print_height = 210
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_fan_speed = 100
+min_layer_height = 0
+min_print_speed = 20
+min_skirt_length = 4
+notes = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_cafile = 
+octoprint_host = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = MK3_PLA [input_filename_base].gcode
+overhangs = 1
+parking_pos_retraction = 92
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.42
+perimeter_speed = 80
+perimeters = 3
+post_process = 
+print_settings_id = MK3 Pretty PLA
+printer_model = MK3
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+printer_settings_id = MK3 Pretty PLA V2
+printer_variant = 0.4
+printer_vendor = 
+raft_layers = 0
+remaining_times = 1
+resolution = 0
+retract_before_travel = 2
+retract_before_wipe = 10%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 4
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+serial_port = 
+serial_speed = 250000
+silent_mode = 1
+single_extruder_multi_material = 0
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 10
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.42
+solid_infill_speed = 80
+spiral_vase = 0
+standby_temperature_delta = -5
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+start_gcode = M83  ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\n
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.42
+support_material_interface_contact_loops = 1
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+temperature = 210
+thin_walls = 1
+threads = 8
+toolchange_gcode = 
+top_infill_extrusion_width = 0.42
+top_solid_infill_speed = 30
+top_solid_layers = 6
+travel_speed = 120
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+wipe_into_infill = 0
+wipe_into_objects = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+wiping_volumes_extruders = 70,70
+wiping_volumes_matrix = 0
+xy_size_compensation = 0
+z_offset = 0

MK2/Slic3r/README.md

@@ -20,4 +20,9 @@ Slic3r 1.40.0 Beta profile and above.
 ### Pretty PETG V3
 Profile by Chris Warkocki
 
-Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain.
+Pretty PETG V3. Just fixed a couple things with bridging I didn't like in the V2. Will work on the MK2, MK2s, and the MK3 for certain.
+
+### Pretty PLA V3
+Profile by Chris Warkocki
+
+Profiles time! I fixed the missing z hop necessary in the Pretty PLA profile so enjoy the refined and fixed version right here right now. It will work for certain on the MK2, MK2s, and the MK3. Nothing crazy in there and is just a nice simple profile with many many refinements.