The M5Dial USB joystick can be used with the Xbox Adaptive Controller (XAC) as well as Windows, MacOS, Linux, and other devices that accept USB HID joysticks.
The XAC provides at most 100 mA on its USB host ports unless it is plugged into a 5V 2A power supply. Keeping the backlight brightness low ensures the M5Dial draws less than 100 mA.
Tested using Arduino IDE 1.8.19 and M5Stack Dial.
Install the following libraries using the Arduino IDE Library Manager.
- "M5Dial" by M5Stack
- "M5Unified" by M5Stack
- "M5GFX" by M5Stack
The USB joystick library is from https://github.com/esp32beans/ESP32_flight_stick. Download the library as a ZIP file then install it using the Arduino IDE "Add .ZIP Library" option.
Note the Board type is STAMP-S3. There is no M5Stack Dial option but the Dial is built around a Stamp-S3 board.
To get the Dial into bootload mode, press and hold the BTN0 button at the middle of the Dial then press and release the RESET button on the right side. Then release BTN0. On other ESP32 boards the BTN0 button is usually labeled the BOOT button. The colorful label covers BTN0 but the button can be pressed without removing the label.
