APDS9960 has invalid id!

[arfrater]

Operating environment/Installation (Hass.io/Docker/pip/etc.):

Hass.io
ESP (ESP32/ESP8266, Board/Sonoff):

ESP32
Affected component:

APDS9960
https://esphome.io/components/sensor/apds9960.html

Description of problem:
In the logs its showing "[apds9960:134]: APDS9960 has invalid id!"

Problem-relevant YAML-configuration entries:

PASTE YAML FILE HERE
esphome:
  name: master_bedroom_sensor
  platform: ESP32
  board: esp-wrover-kit

wifi:
  ssid: "----"
  password: "----"
  power_save_mode: none 
  manual_ip:
#    # Set this to the IP of the ESP
    static_ip: ----
#    # Set this to the IP address of the router. Often ends with .1
    gateway: ----
#    # The subnet of the network. 255.255.255.0 works for most home networks.
    subnet: ----
    dns1: ----

# Enable logging
logger:

# Enable Home Assistant API
api:
  password: "----"

ota:
  password: "----"
  
esp32_ble_tracker:
  scan_interval: 60s 
  
web_server:
  port: 80 
text_sensor:
  - platform: wifi_info
    ip_address:
      name: "Master Bedroom Sensor IP address"
    ssid:
      name: "Master Bedroom Sensor SSID"
  - platform: version
    name: "Master Bedroom Sensor ESPHome Version"
    
apds9960:
  address: 0x39
  update_interval: 30s    
  
  
switch:
  - platform: restart
    name: "Master Bedroom Sensor Restart"

  - platform: shutdown
    name: "Master Bedroom Sensor Shutdown" 

binary_sensor:
  - platform: status
    name: "Master Bedroom Sensor Status"   

  - platform: gpio
    pin: 34
    name: "Master Bedroom Motion"
    device_class: motion
    
  - platform: gpio
    pin: 33
    name: "Sound level"
    filters:
      - delayed_off: 6s  
      
  - platform: ble_presence
    mac_address: ----
    name: "----"   
    
  - platform: ble_presence
    mac_address: ----
    name: "----" 
    
  - platform: ble_presence
    mac_address: ----
    name: "----"  
    
  - platform: apds9960
    name: "APDS960 Up Movement"
    direction: UP
    
  - platform: apds9960
    name: "APDS960 Down Movement"
    direction: DOWN
    
  - platform: apds9960
    name: "APDS960 Left Movement"
    direction: LEFT
    
  - platform: apds9960
    name: "APDS960 Right Movement"
    direction: RIGHT
    
sensor:
  - platform: wifi_signal
    name: "Master Bedroom Sensor WiFi Signal"
    update_interval: 60s 

  - platform: bmp280
    temperature:
      name: "BME280 Temperature"
      id: mb_temp
      oversampling: 16x
    pressure:
      name: "BME280 Pressure"
      id: mb_press
    address: 0x76
    update_interval: 60s
    
  - platform: apds9960
    name: "APDS9960 Clear Channel"
    type: CLEAR
    
  - platform: apds9960
    name: "APDS9960 Red Channel"
    type: RED
    
  - platform: apds9960
    name: "APDS9960 Green Channel"
    type: GREEN
    
  - platform: apds9960
    name: "APDS9960 Blue Channel"
    type: BLUE
    
  - platform: apds9960
    name: "APDS9960 Proximity Channel"
    type: PROXIMITY
   
  - platform: uptime
    name: Master Bedroom Uptime 
    update_interval: 60s


display:
  - platform: ssd1306_i2c
    model: "SH1106 128x64"
    address: 0x3C
    lambda: |-
      // Print "Bedroom Sensor" in top center.
      it.printf(64, 0, id(font1), TextAlign::TOP_CENTER, "Bedroom Sensor");

      // Print Master Bedroom Temperature (from master_bedroom_sensor)
      if (id(mb_temp).has_state()) {
        it.printf(3, 60, id(font2), TextAlign::BASELINE_LEFT , "%.1f°", id(mb_temp).state);
      }

      // Print Master Bedroom Pressure (from master_bedroom_sensor)
      if (id(mb_press).has_state()) {
        it.printf(127, 60, id(font3), TextAlign::BASELINE_RIGHT , "%.1f°", id(mb_press).state);
      }

font:
  - file: 'slkscr.ttf'
    id: font1
    size: 8

  - file: 'BebasNeue-Regular.ttf'
    id: font2
    size: 36

  - file: 'arial.ttf'
    id: font3
    size: 14


i2c:
  sda: 21
  scl: 22
  scan: True

Logs (if applicable):

INFO Reading configuration...

INFO Starting log output from 192.168.1.33 using esphome API
INFO Connecting to 192.168.1.33:6053 (192.168.1.33)
INFO Successfully connected to 192.168.1.33
[21:33:55][I][app:096]: esphome version 1.13.6 compiled on Oct 14 2019, 18:02:51
[21:33:55][C][wifi:372]: WiFi:
[21:33:55][C][wifi:254]: SSID: [redacted]
[21:33:55][C][wifi:255]: IP Address: 192.168.1.33
[21:33:55][C][wifi:257]: BSSID: [redacted]
[21:33:55][C][wifi:258]: Hostname: 'master_bedroom_sensor'
[21:33:55][C][wifi:262]: Signal strength: -33 dB ▂▄▆█
[21:33:55][C][wifi:263]: Channel: 4
[21:33:55][C][wifi:264]: Subnet: 255.255.255.0
[21:33:55][C][wifi:265]: Gateway: 192.168.1.1
[21:33:55][C][wifi:266]: DNS1: 192.168.1.12
[21:33:55][C][wifi:267]: DNS2: 0.0.0.0
[21:33:55][C][i2c:028]: I2C Bus:
[21:33:55][C][i2c:029]: SDA Pin: GPIO21
[21:33:55][C][i2c:030]: SCL Pin: GPIO22
[21:33:55][C][i2c:031]: Frequency: 50000 Hz
[21:33:55][I][i2c:033]: Scanning i2c bus for active devices...
[21:33:55][I][i2c:040]: Found i2c device at address 0x39
[21:33:55][I][i2c:040]: Found i2c device at address 0x3C
[21:33:55][I][i2c:040]: Found i2c device at address 0x76
[21:33:55][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Master Bedroom Motion'
[21:33:55][C][gpio.binary_sensor:015]: Device Class: 'motion'
[21:33:55][C][gpio.binary_sensor:016]: Pin: GPIO34 (Mode: INPUT)
[21:33:55][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Sound level'
[21:33:55][C][gpio.binary_sensor:016]: Pin: GPIO33 (Mode: INPUT)
[21:33:55][C][logger:137]: Logger:
[21:33:55][C][logger:138]: Level: DEBUG
[21:33:55][C][logger:139]: Log Baud Rate: 115200
[21:33:55][C][logger:140]: Hardware UART: UART0
[21:33:55][C][esp32_ble_tracker:459]: BLE Tracker:
[21:33:55][C][esp32_ble_tracker:460]: Scan Interval: 60 s
[21:33:55][C][apds9960:124]: APDS9960:
[21:33:55][C][apds9960:125]: Address: 0x39
[21:33:55][C][apds9960:127]: Update Interval: 30.0s
[21:33:55][E][apds9960:134]: APDS9960 has invalid id!
[21:33:55][C][restart:021]: Restart Switch 'Master Bedroom Sensor Restart'
[21:33:55][C][restart:021]: Icon: 'mdi:restart'
[21:33:55][C][shutdown.switch:010]: Shutdown Switch 'Master Bedroom Sensor Shutdown'
[21:33:55][C][shutdown.switch:010]: Icon: 'mdi:power'
[21:33:55][C][status:034]: Status Binary Sensor 'Master Bedroom Sensor Status'
[21:33:55][C][status:034]: Device Class: 'connectivity'
[21:33:55][C][ble_presence:011]: BLE Presence '----'
[21:33:55][C][ble_presence:011]: BLE Presence '----'
[21:33:55][C][ble_presence:011]: BLE Presence '----'
[21:33:55][C][bmp280.sensor:098]: BMP280:
[21:33:55][C][bmp280.sensor:099]: Address: 0x76
[21:33:55][C][bmp280.sensor:111]: IIR Filter: OFF
[21:33:55][C][bmp280.sensor:112]: Update Interval: 60.0s
[21:33:55][C][bmp280.sensor:114]: Temperature 'BME280 Temperature'
[21:33:55][C][bmp280.sensor:114]: Unit of Measurement: '°C'
[21:33:55][C][bmp280.sensor:114]: Accuracy Decimals: 1
[21:33:55][C][bmp280.sensor:114]: Icon: 'mdi:thermometer'
[21:33:55][C][bmp280.sensor:115]: Oversampling: 16x
[21:33:55][C][bmp280.sensor:116]: Pressure 'BME280 Pressure'
[21:33:55][C][bmp280.sensor:116]: Unit of Measurement: 'hPa'
[21:33:55][C][bmp280.sensor:116]: Accuracy Decimals: 1
[21:33:55][C][bmp280.sensor:116]: Icon: 'mdi:gauge'
[21:33:55][C][bmp280.sensor:117]: Oversampling: 16x
[21:33:55][C][version.text_sensor:015]: Version Text Sensor 'Master Bedroom Sensor ESPHome Version'
[21:33:55][C][version.text_sensor:015]: Icon: 'mdi:new-box'
[21:33:55][C][ssd1306_i2c:023]: I2C SSD1306
[21:33:55][C][ssd1306_i2c:023]: Rotations: 0 °
[21:33:55][C][ssd1306_i2c:023]: Dimensions: 128px x 64px
[21:33:55][C][ssd1306_i2c:024]: Address: 0x3C
[21:33:55][C][ssd1306_i2c:025]: Model: SH1106 128x64
[21:33:55][C][ssd1306_i2c:027]: External VCC: NO
[21:33:55][C][ssd1306_i2c:028]: Update Interval: 1.0s
[21:33:55][C][web_server:125]: Web Server:
[21:33:55][C][web_server:126]: Address: 192.168.1.33:80
[21:33:55][C][ota:029]: Over-The-Air Updates:
[21:33:55][C][ota:030]: Address: 192.168.1.33:3232
[21:33:55][C][ota:032]: Using Password.
[21:33:55][C][api:103]: API Server:
[21:33:55][C][api:104]: Address: 192.168.1.33:6053
[21:33:55][C][wifi_signal.sensor:009]: WiFi Signal 'Master Bedroom Sensor WiFi Signal'
[21:33:55][C][wifi_signal.sensor:009]: Unit of Measurement: 'dB'
[21:33:55][C][wifi_signal.sensor:009]: Accuracy Decimals: 0
[21:33:55][C][wifi_signal.sensor:009]: Icon: 'mdi:wifi'

PASTE DEBUG LOG HERE

Additional information and things you've tried:
Found on another forum
https://forum.arduino.cc/index.php?topic=526733.0

Re: APDS 9960 Gesture sensor not working
#14
Aug 18, 2019, 10:21 pm Last Edit: Aug 18, 2019, 10:27 pm by ronin_boss
I solved the problem with the Chinese clones !!!!!!!!!!!!!! After about 2 months of torment. The ones that do not go to read the gestures but the other functionalities go .... those that receive the message "Something went wrong during APDS-9960 init!"... In the library, check if the sensor id is 0xAB .. but the id of the Chinese ones is 0xA8 . at least mine ... So ... you need to change in SpurkFun_APDS9960.h line #define APDS9960_ID_1 0xAB with 0xA8 .. and ready. if you use ESP8266 you still have to play with GAINE and BOOST on LEDs for more precise functionality .. other modules may have other ids.
aa. and something else. you can use gestures without interrupting pin.
In setup, at apds.enableGestureSensor (true) use (false) and modify the sketch.
Anyone who wants more details can contact me at ronin_boss@yahoo.com

[OttoWinter]

Yes I had a discussion about exactly this on discord some time ago.

These cheap chinese clones are not really APDS9960s, they are some other chip that looks similar to the APDS9960 but does not have the same features (if I remember correctly the message format is quite different too). Point is: this integration only works with real APDS9960s, not any different devices.