New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Reset to Factory Settings (AEGHB-405) #104
Comments
keep press |
You can use ESP-Launchpad to flash the factory firmware, please choose the following file: If download fails, please hold down the |
Thanks Cao Yan - I appreciate your help.
However - when I try to Connect the Device it is saying it's paired, but it does Connect, then the main screen shows that it is being used. (see images in attachment)
There is nothing that it is paired with. I have rebooted the PC - have checked my phones and anything else with Bluetooth and nothing is paired to it.
How do I clear this?
Phil
Regards
Phil Jones
PAJ Services
Mob: 07768 746032
From: Cao Yan ***@***.***>
Sent: 28 September 2023 05:46
To: espressif/esp-box ***@***.***>
Cc: Phil Jones ***@***.***>; Author ***@***.***>
Subject: Re: [espressif/esp-box] Reset to Factory Settings (AEGHB-405) (Issue #104)
You can use ESP-Launchpad <https://github.com/espressif/esp-box/blob/master/docs/firmware_update.md#updating-firmware-with-esp-launchpad-recommended> to flash the factory firmware, please choose the following file:
<https://user-images.githubusercontent.com/85924095/271176438-ffa7d637-c114-417a-8899-ef56fcb23ad8.png>
If download fails, please hold down the Boot button and then press the Reset button to initiate Firmware Download mode manually.
—
Reply to this email directly, view it on GitHub <#104 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGHHW6GAOFPW4C5PBOLEX23X4T6HVANCNFSM6AAAAAA5JOY2OY> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGHHW6FTLTRDPEJOMY4QY7LX4T6HVA5CNFSM6AAAAAA5JOY2O2WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTHTZBAM.gif> Message ID: ***@***.*** ***@***.***> >
…--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
|
Re the below, someone suggested I should manually enter Firmware Download mode by holding the box-lite's Boot button and then press the Reset button, then try to reconnect the device and flash firmware again.
I have tried this but doesn’t seem to make a difference.
Can you confirm for me which button is which – and how long do I hold them down? Do I do this while it is plugged in – and should they be pressed at same time.
I really appreciate any help you can give.
Thanks
Phil
Thanks Cao Yan - I appreciate your help.
However - when I try to Connect the Device it is saying it's paired, but it does Connect, then the main screen shows that it is being used. (see images in attachment)
There is nothing that it is paired with. I have rebooted the PC - have checked my phones and anything else with Bluetooth and nothing is paired to it.
How do I clear this?
Phil
Regards
Phil Jones
PAJ Services
Mob: 07768 746032
From: Cao Yan ***@***.***>
Sent: 28 September 2023 05:46
To: espressif/esp-box ***@***.***>
Cc: Phil Jones ***@***.***>; Author ***@***.***>
Subject: Re: [espressif/esp-box] Reset to Factory Settings (AEGHB-405) (Issue #104)
You can use ESP-Launchpad <https://github.com/espressif/esp-box/blob/master/docs/firmware_update.md#updating-firmware-with-esp-launchpad-recommended> to flash the factory firmware, please choose the following file:
<https://user-images.githubusercontent.com/85924095/271176438-ffa7d637-c114-417a-8899-ef56fcb23ad8.png>
If download fails, please hold down the Boot button and then press the Reset button to initiate Firmware Download mode manually.
—
Reply to this email directly, view it on GitHub <#104 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGHHW6GAOFPW4C5PBOLEX23X4T6HVANCNFSM6AAAAAA5JOY2OY> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGHHW6FTLTRDPEJOMY4QY7LX4T6HVA5CNFSM6AAAAAA5JOY2O2WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTHTZBAM.gif> Message ID: ***@***.*** ***@***.***> >
…--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
|
Hi Phil, the boot button is located in the top left corner of the device, and the rst button is located in the bottom left corner. You can refer to this hardware overview. |
That’s great thanks – I’ve managed to do it now and reloaded the software.
I’ve also got some basic Bluetooth code running ok.
Could I just ask you something else – with the BOX-Lite which libraries should I use to display something on the screen? Can you point me to any examples of writing to the screen?
Regards
Phil Jones
PAJ Services
Mob: 07768 746032
From: Cao Yan ***@***.***>
Sent: 05 October 2023 03:18
To: espressif/esp-box ***@***.***>
Cc: Phil Jones ***@***.***>; Author ***@***.***>
Subject: Re: [espressif/esp-box] Reset to Factory Settings (AEGHB-405) (Issue #104)
Hi Phil, the boot button is located in the top left corner of the device, and the rst button is located in the bottom left corner. You can refer to this hardawre overview <https://github.com/espressif/esp-box/blob/master/docs/hardware_overview/esp32_s3_box_lite/hardware_overview_for_lite.md> .
Just hood on the boot button then one press the rst boot, please notice one press, which means just press one reset one time, then release the boot (DO NOT pressed at same time). Another same way we usually like used is hold on the boot button then plug and unplug one time the USB-C cable. Hope this can help you, more confusing or questions, you can show the serial log or record a video of the problem phenomenon and upload it to your personal YouTube or other platform.
—
Reply to this email directly, view it on GitHub <#104 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGHHW6BAZVZNELCJZII7NZDX5YKDZAVCNFSM6AAAAAA5JOY2O2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONBXHEZTMNJUG4> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGHHW6HBCAUXDFMROZV65PLX5YKDZA5CNFSM6AAAAAA5JOY2O2WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTIF5SSG.gif> Message ID: ***@***.*** ***@***.***> >
…--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
|
You can refer t this bsp, https://github.com/espressif/esp-bsp/tree/master/esp-box-lite |
Thank you so much |
I’m now trying to get the Display working with one of the examples, but have an issue where the screen is staying black unless I hold the reset button in.
I have started an Issue as follows;
#106
Regards
Phil Jones
From: espressif2022 ***@***.***>
Sent: 07 October 2023 02:46
To: espressif/esp-box ***@***.***>
Cc: Phil Jones ***@***.***>; Author ***@***.***>
Subject: Re: [espressif/esp-box] Reset to Factory Settings (AEGHB-405) (Issue #104)
That’s great thanks – I’ve managed to do it now and reloaded the software. I’ve also got some basic Bluetooth code running ok. Could I just ask you something else – with the BOX-Lite which libraries should I use to display something on the screen? Can you point me to any examples of writing to the screen? Regards Phil Jones PAJ Services Mob: 07768 746032 From: Cao Yan @.> Sent: 05 October 2023 03:18 To: espressif/esp-box @.> Cc: Phil Jones @.>; Author @.> Subject: Re: [espressif/esp-box] Reset to Factory Settings (AEGHB-405) (Issue #104 <#104> ) Hi Phil, the boot button is located in the top left corner of the device, and the rst button is located in the bottom left corner. You can refer to this hardawre overview https://github.com/espressif/esp-box/blob/master/docs/hardware_overview/esp32_s3_box_lite/hardware_overview_for_lite.md . Just hood on the boot button then one press the rst boot, please notice one press, which means just press one reset one time, then release the boot (DO NOT pressed at same time). Another same way we usually like used is hold on the boot button then plug and unplug one time the USB-C cable. Hope this can help you, more confusing or questions, you can show the serial log or record a video of the problem phenomenon and upload it to your personal YouTube or other platform. — Reply to this email directly, view it on GitHub <#104 (comment) <#104 (comment)> > , or unsubscribe https://github.com/notifications/unsubscribe-auth/AGHHW6BAZVZNELCJZII7NZDX5YKDZAVCNFSM6AAAAAA5JOY2O2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONBXHEZTMNJUG4 . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AGHHW6HBCAUXDFMROZV65PLX5YKDZA5CNFSM6AAAAAA5JOY2O2WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTIF5SSG.gif Message ID: @.*** @.***> >
…
-- This email has been checked for viruses by AVG antivirus software. www.avg.com <http://www.avg.com>
You can refer t this bsp, https://github.com/espressif/esp-bsp/tree/master/esp-box-lite
Here is the example, https://github.com/espressif/esp-bsp/tree/master/examples/display
—
Reply to this email directly, view it on GitHub <#104 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AGHHW6GTMCVNK5NM75ZREE3X6CX7BAVCNFSM6AAAAAA5JOY2O2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONJRGU2TEOBVG4> .
You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AGHHW6ANLH5S2FBRHNIZAS3X6CX7BA5CNFSM6AAAAAA5JOY2O2WGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTIM2JVS.gif> Message ID: ***@***.*** ***@***.***> >
|
Temporarily closed due to the extended period of time with no response. Should you have additional questions or concerns, don't hesitate to reopen the issue. |
I've got a ESP32-S3-BOX-Lite - and have been doing some coding for a project. Unfortunately, I think I screwed it up with a piece of code - and it now isn't working properly. I have tried to download the firmware using the flash_download tool but get an error as follows;
Do I need to Factory RESET and if so How do I do this?
Thanks Phil
The text was updated successfully, but these errors were encountered: