setup for esp-csi console_test (AEGHB-735)

[tempecks]

I encountered the error witten below when setting up for esp-csi console_test.
How can I solve this problem? Please help me, very beginner.

PS C:\esp-csi\examples\esp-radar\console_test> idf.py set-target esp32-c3
Adding "set-target"'s dependency "fullclean" to list of commands with default set of options.
Executing action: fullclean
Directory 'C:\esp-csi\examples\esp-radar\console_test\build' doesn't seem to be a CMake build directory. Refusing to automatically delete files in this directory. Delete the directory manually to 'clean' it.

[MacChu0315-Espressif]

performing commands below:
idf.py python-clean; idf.py fullclean; rm -rf build;
and try to rerun the commands following the guide of Readme of Console_test may help.

Besides, Getting started of ESP-IDF may help too.

[tempecks]

Thank you for your comment.
I'sorry that after commanding idf.py fullclean, the same error is still coming.
On my device, csi_data_read_parse.py is working properly.
Should I change anything for esp-radar before commanding idf.py set-target esp32c3?

BTW, can esp-radar work on ESP32-C3?
The example uses ESP32-S3, not C3.

[MacChu0315-Espressif]

Can you provide the completed output log when running commands idf.py python-clean; idf.py fullclean; rm -rf build; idf.py set-target esp32c3; idf.py flash? And please make sure your have run the commands git pull; git submodule update --init --recursive; ./install.sh; . ./export.sh; at the root dirctory of esp-idf.

Yes, esp-radar can work on ESP32-C3.

[tempecks]

Thank you for your comment.

Here are the completed output log when running commands idf.py python-clean; idf.py fullclean; rm -rf build; idf.py set-target esp32; idf.py flash;
*I changed the device from ESP32-C3 to ESP32, because now I have only ESP32 here.

PS C:\Windows\system32> cd C:\esp-csi\examples\esp-radar\console_test
PS C:\esp-csi\examples\esp-radar\console_test> idf.py python-clean
Executing action: python-clean
Done
PS C:\esp-csi\examples\esp-radar\console_test> idf.py fullclean
Executing action: fullclean
Build directory 'C:\esp-csi\examples\esp-radar\console_test\build' not found. Nothing to clean.
Executing action: remove_managed_components
Done
PS C:\esp-csi\examples\esp-radar\console_test> rm -rf build
Remove-Item : パラメーター名 'rf' に一致するパラメーターが見つかりません。
発生場所 行:1 文字:4

• rm -rf build

+ CategoryInfo          : InvalidArgument: (:) [Remove-Item]、ParameterBindingException
+ FullyQualifiedErrorId : NamedParameterNotFound,Microsoft.PowerShell.Commands.RemoveItemCommand

PS C:\esp-csi\examples\esp-radar\console_test> idf.py set-target esp32
Adding "set-target"'s dependency "fullclean" to list of commands with default set of options.
Executing action: fullclean
Build directory 'C:\esp-csi\examples\esp-radar\console_test\build' not found. Nothing to clean.
Executing action: set-target
Set Target to: esp32, new sdkconfig created. Existing sdkconfig renamed to sdkconfig.old.
Running cmake in directory C:\esp-csi\examples\esp-radar\console_test\build
Executing "cmake -G Ninja -DPYTHON_DEPS_CHECKED=1 -DESP_PLATFORM=1 -DIDF_TARGET=esp32 -DCCACHE_ENABLE=1 C:\esp-csi\examples\esp-radar\console_test"...
-- Found Git: C:/Espressif/tools/idf-git/2.39.2/cmd/git.exe (found version "2.39.2.windows.1")
-- ccache will be used for faster recompilation
-- The C compiler identification is GNU 11.2.0
-- The CXX compiler identification is GNU 11.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc.exe
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Building ESP-IDF components for target esp32
Dependencies lock doesn't exist, solving dependencies.
Using component placed at C:\esp-csi\components\esp-radar for dependency esp-radar(0.*), specified in C:/esp-csi/examples/esp-radar/console_test/main\idf_component.yml
CMake Error at C:/Espressif/frameworks/esp-idf-v5.0.4/tools/cmake/build.cmake:519 (message):
WARNING: Component "espressif/cmake_utilities" not found

WARNING: From https://github.com/espressif/esp-rainmaker

 e123e56..90a8d9e  master     -> master

ERROR: Because no versions of esp-radar match >=0.0.0,<0.2.0 ||

0.2.0,<1.0.0

and esp-radar (0.2.0) depends on espressif/cmake_utilities (0.), esp-radar (>=0.0.0,<1.0.0) requires espressif/cmake_utilities (0.).

So, because no versions of espressif/cmake_utilities match 0.*

and project depends on esp-radar (0.*), version solving failed.

Call Stack (most recent call first):
C:/Espressif/frameworks/esp-idf-v5.0.4/tools/cmake/project.cmake:530 (idf_build_process)
CMakeLists.txt:10 (project)

...-- Configuring incomplete, errors occurred!
See also "C:/esp-csi/examples/esp-radar/console_test/build/CMakeFiles/CMakeOutput.log".
cmake failed with exit code 1, output of the command is in the C:\esp-csi\examples\esp-radar\console_test\build\log\idf_py_stderr_output_7572 and C:\esp-csi\examples\esp-radar\console_test\build\log\idf_py_stdout_output_7572
PS C:\esp-csi\examples\esp-radar\console_test> idf.py flash
Executing action: flash
Running cmake in directory C:\esp-csi\examples\esp-radar\console_test\build
Executing "cmake -G Ninja -DPYTHON_DEPS_CHECKED=1 -DESP_PLATFORM=1 -DCCACHE_ENABLE=1 C:\esp-csi\examples\esp-radar\console_test"...
-- IDF_TARGET not set, using default target: esp32
-- Found Git: C:/Espressif/tools/idf-git/2.39.2/cmd/git.exe (found version "2.39.2.windows.1")
-- ccache will be used for faster recompilation
-- The C compiler identification is GNU 11.2.0
-- The CXX compiler identification is GNU 11.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc.exe
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Espressif/tools/xtensa-esp32-elf/esp-2022r1-11.2.0/xtensa-esp32-elf/bin/xtensa-esp32-elf-g++.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Building ESP-IDF components for target esp32
Dependencies lock doesn't exist, solving dependencies.
Using component placed at C:\esp-csi\components\esp-radar for dependency esp-radar(0.*), specified in C:/esp-csi/examples/esp-radar/console_test/main\idf_component.yml
CMake Error at C:/Espressif/frameworks/esp-idf-v5.0.4/tools/cmake/build.cmake:519 (message):
WARNING: Component "espressif/cmake_utilities" not found

ERROR: Because no versions of esp-radar match >=0.0.0,<0.2.0 ||

0.2.0,<1.0.0

and esp-radar (0.2.0) depends on espressif/cmake_utilities (0.), esp-radar (>=0.0.0,<1.0.0) requires espressif/cmake_utilities (0.).

So, because no versions of espressif/cmake_utilities match 0.*

and project depends on esp-radar (0.*), version solving failed.

Call Stack (most recent call first):
C:/Espressif/frameworks/esp-idf-v5.0.4/tools/cmake/project.cmake:530 (idf_build_process)
CMakeLists.txt:10 (project)

...-- Configuring incomplete, errors occurred!
See also "C:/esp-csi/examples/esp-radar/console_test/build/CMakeFiles/CMakeOutput.log".
cmake failed with exit code 1, output of the command is in the C:\esp-csi\examples\esp-radar\console_test\build\log\idf_py_stderr_output_3220 and C:\esp-csi\examples\esp-radar\console_test\build\log\idf_py_stdout_output_3220
PS C:\esp-csi\examples\esp-radar\console_test>

[tempecks]

Here are the completed output log when running commands git pull; git submodule update --init --recursive; ./install.sh; . ./export.sh; at the dirctory of esp-idf-v5.0.4;

PS C:\Espressif\frameworks\esp-idf-v5.0.4> git pull
error: cannot spawn gpg: No such file or directory
Already up to date.
PS C:\Espressif\frameworks\esp-idf-v5.0.4> git submodule update --init --recursive
PS C:\Espressif\frameworks\esp-idf-v5.0.4> ./install.sh
PS C:\Espressif\frameworks\esp-idf-v5.0.4>
[main 2024-07-16T11:14:29.152Z] update#setState idle
[main 2024-07-16T11:14:59.158Z] update#setState checking for updates
PS C:\Espressif\frameworks\esp-idf-v5.0.4> tate idle
PS C:\Espressif\frameworks\esp-idf-v5.0.4> . ./export.sh

After commanding ./install.sh; . ./export.sh, VS CODE popped up, but nothing happen except for the out put written above.

[MacChu0315-Espressif]

Seems your development environment is' win+PowerShell '? I recommend that you follow the document: [how to use the WSL + VSCode build ESP32 development environment] (https://www.bilibili.com/read/cv7755144/) set up your development environment on Windows. Looking forward to your feedback.

[tempecks]

Thank you for your comment.
Following the document , I encountered the situation witten below. Please tell me how I should solve this?

xxx@ xxx: /esp-idf$ ./install.sh
Detecting the Python interpreter
Checking "python3" ...
Python 3.8.0
"python3" has been detected
Checking Python compatibility
Installing ESP-IDF tools
Updating /home/ xxx/.espressif/idf-env.json
Selected targets are: esp32, esp32c6, esp32c5, esp32s2, esp32s3, esp32c3, esp32c2, esp32c61, esp32h2, esp32p4
Current system platform: linux-amd64
Installing tools: xtensa-esp-elf-gdb, riscv32-esp-elf-gdb, xtensa-esp-elf, riscv32-esp-elf, esp32ulp-elf, openocd-esp32, esp-rom-elfs
Skipping xtensa-esp-elf-gdb@14.2_20240403 (already installed)
Skipping riscv32-esp-elf-gdb@14.2_20240403 (already installed)
Skipping xtensa-esp-elf@esp-13.2.0_20240530 (already installed)
Skipping riscv32-esp-elf@esp-13.2.0_20240530 (already installed)
Skipping esp32ulp-elf@2.38_20240113 (already installed)
Skipping openocd-esp32@v0.12.0-esp32-20240318 (already installed)
Skipping esp-rom-elfs@20240305 (already installed)
Installing Python environment and packages
Creating a new Python environment in /home/ xxx/.espressif/python_env/idf5.4_py3.8_env
The virtual environment was not created successfully because ensurepip is not
available. On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.

apt-get install python3-venv

You may need to use sudo with that command. After installing the python3-venv
package, recreate your virtual environment.

Failing command: ['/home/ xxx/.espressif/python_env/idf5.4_py3.8_env/bin/python3', '-Im', 'ensurepip', '--upgrade', '--default-pip']

Traceback (most recent call last):
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 3248, in
main(sys.argv[1:])
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 3240, in main
action_func(args)
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 2638, in action_install_python_env
subprocess.check_call([sys.executable, '-m', 'venv',
File "/usr/lib/python3.8/subprocess.py", line 364, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'venv', '--clear', '/home/ xxx/.espressif/python_env/idf5.4_py3.8_env']' returned non-zero exit status 1.

xxx@ xxx: /esp-idf$ sudo apt-get install python3-venv
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3-venv is already the newest version (3.6.7-1 18.04).
The following packages were automatically installed and are no longer required:
efibootmgr libefiboot1 libefivar1
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 29 not upgraded.

xxx@ xxx: /esp-idf$ ./install.sh
Detecting the Python interpreter
Checking "python3" ...
Python 3.8.0
"python3" has been detected
Checking Python compatibility
Installing ESP-IDF tools
Selected targets are: esp32c5, esp32, esp32p4, esp32h2, esp32c61, esp32s2, esp32c2, esp32s3, esp32c3, esp32c6
Current system platform: linux-amd64
Installing tools: xtensa-esp-elf-gdb, riscv32-esp-elf-gdb, xtensa-esp-elf, riscv32-esp-elf, esp32ulp-elf, openocd-esp32, esp-rom-elfs
Skipping xtensa-esp-elf-gdb@14.2_20240403 (already installed)
Skipping riscv32-esp-elf-gdb@14.2_20240403 (already installed)
Skipping xtensa-esp-elf@esp-13.2.0_20240530 (already installed)
Skipping riscv32-esp-elf@esp-13.2.0_20240530 (already installed)
Skipping esp32ulp-elf@2.38_20240113 (already installed)
Skipping openocd-esp32@v0.12.0-esp32-20240318 (already installed)
Skipping esp-rom-elfs@20240305 (already installed)
Installing Python environment and packages
Python 3.8.0
/home/ xxx/.espressif/python_env/idf5.4_py3.8_env/bin/python: No module named pip
WARNING: pip is not available in the existing virtual environment, new virtual environment will be created.
WARNING: Removing the existing Python environment in /home/ xxx/.espressif/python_env/idf5.4_py3.8_env
Creating a new Python environment in /home/ xxx/.espressif/python_env/idf5.4_py3.8_env
The virtual environment was not created successfully because ensurepip is not
available. On Debian/Ubuntu systems, you need to install the python3-venv
package using the following command.

apt-get install python3-venv

You may need to use sudo with that command. After installing the python3-venv
package, recreate your virtual environment.

Failing command: ['/home/ xxx/.espressif/python_env/idf5.4_py3.8_env/bin/python3', '-Im', 'ensurepip', '--upgrade', '--default-pip']

Traceback (most recent call last):
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 3248, in
main(sys.argv[1:])
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 3240, in main
action_func(args)
File "/home/ xxx/esp-idf/tools/idf_tools.py", line 2638, in action_install_python_env
subprocess.check_call([sys.executable, '-m', 'venv',
File "/usr/lib/python3.8/subprocess.py", line 364, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['/usr/bin/python3', '-m', 'venv', '--clear', '/home/ xxx/.espressif/python_env/idf5.4_py3.8_env']' returned non-zero exit status 1.