Merge branch 'fix/usb_host_soc_caps_backport_v5.0' into 'release/v5.0'

USB host soc caps (backport v5.0)

See merge request espressif/esp-idf!27400

components/hal/include/hal/usb_dwc_hal.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -22,15 +22,11 @@ NOTE: Thread safety is the responsibility fo the HAL user. All USB Host HAL
 #include "hal/usb_types_private.h"
 #include "hal/assert.h"
 
-// ------------------------------------------------ Macros and Types ---------------------------------------------------
+#if SOC_USB_OTG_SUPPORTED
 
-// ------------------ Constants/Configs --------------------
+// ------------------------------------------------ Macros and Types ---------------------------------------------------
 
-#define USB_DWC_HAL_DMA_MEM_ALIGN              512
-#define USB_DWC_HAL_FRAME_LIST_MEM_ALIGN       512     //The frame list needs to be 512 bytes aligned (contrary to the databook)
-#define USB_DWC_HAL_NUM_CHAN                   8
-#define USB_DWC_HAL_XFER_DESC_SIZE             (sizeof(usb_dwc_ll_dma_qtd_t))
-#define USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES    200     //Although we have a 256 lines, only 200 lines are usuable due to EPINFO_CTL
+// ----------------------- Configs -------------------------
 
 /**
  * @brief FIFO size configuration structure
@@ -168,7 +164,7 @@ typedef struct {
     struct {
         int num_allocd;                             /**< Number of channels currently allocated */
         uint32_t chan_pend_intrs_msk;               /**< Bit mask of channels with pending interrupts */
-        usb_dwc_hal_chan_t *hdls[USB_DWC_HAL_NUM_CHAN];   /**< Handles of each channel. Set to NULL if channel has not been allocated */
+        usb_dwc_hal_chan_t *hdls[USB_DWC_NUM_HOST_CHAN];    /**< Handles of each channel. Set to NULL if channel has not been allocated */
     } channels;
 } usb_dwc_hal_context_t;
 
@@ -229,7 +225,7 @@ void usb_dwc_hal_core_soft_reset(usb_dwc_hal_context_t *hal);
  * may be situations where this function may need to be called again to resize the FIFOs. If resizing FIFOs dynamically,
  * it is the user's responsibility to ensure there are no active channels when this function is called.
  *
- * @note The totol size of all the FIFOs must be less than or equal to USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES
+ * @note The totol size of all the FIFOs must be less than or equal to USB_DWC_FIFO_TOTAL_USABLE_LINES
  * @note After a port reset, the FIFO size registers will reset to their default values, so this function must be called
  *       again post reset.
  *
@@ -785,6 +781,8 @@ usb_dwc_hal_chan_t *usb_dwc_hal_get_chan_pending_intr(usb_dwc_hal_context_t *hal
  */
 usb_dwc_hal_chan_event_t usb_dwc_hal_chan_decode_intr(usb_dwc_hal_chan_t *chan_obj);
 
+#endif // SOC_USB_OTG_SUPPORTED
+
 #ifdef __cplusplus
 }
 #endif

components/hal/include/hal/usb_dwc_ll.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -17,6 +17,34 @@ extern "C" {
 #include "hal/misc.h"
 
 
+/* -----------------------------------------------------------------------------
+--------------------------------- DWC Constants --------------------------------
+----------------------------------------------------------------------------- */
+
+#define USB_DWC_QTD_LIST_MEM_ALIGN              512
+#define USB_DWC_FRAME_LIST_MEM_ALIGN            512     // The frame list needs to be 512 bytes aligned (contrary to the databook)
+/*
+Although we have a 256 lines, only 200 lines are useable due to EPINFO_CTL.
+Todo: Check sizes again and express this macro in terms of DWC config options (IDF-7384)
+*/
+#define USB_DWC_FIFO_TOTAL_USABLE_LINES         200
+
+/* -----------------------------------------------------------------------------
+------------------------------ DWC Configuration -------------------------------
+----------------------------------------------------------------------------- */
+
+/*
+ * List of relevant DWC configurations. See DWC OTG databook Chapter 3 for more
+ * details.
+ */
+#define USB_DWC_FSPHY_INTERFACE             1
+#define USB_DWC_NUM_EPS                     6
+#define USB_DWC_NUM_IN_EPS                  5       // Todo: Add check for when number of IN channels exceeds limit (IDF-8556)
+#define USB_DWC_NUM_HOST_CHAN               8
+#define USB_DWC_DFIFO_DEPTH                 256
+#define USB_DWC_RX_DFIFO_DEPTH              256
+#define USB_DWC_TX_DFIFO_DEPTH              256     // Same value applies to HNPERIO, NPERIO, HPERIO, and DINEP
+
 /* -----------------------------------------------------------------------------
 ------------------------------- Global Registers -------------------------------
 ----------------------------------------------------------------------------- */

components/hal/usb_dwc_hal.c

@@ -159,14 +159,14 @@ void usb_dwc_hal_core_soft_reset(usb_dwc_hal_context_t *hal)
     hal->flags.val = 0;
     hal->channels.num_allocd = 0;
     hal->channels.chan_pend_intrs_msk = 0;
-    memset(hal->channels.hdls, 0, sizeof(usb_dwc_hal_chan_t *) * USB_DWC_HAL_NUM_CHAN);
+    memset(hal->channels.hdls, 0, sizeof(usb_dwc_hal_chan_t *) * USB_DWC_NUM_HOST_CHAN);
 }
 
 void usb_dwc_hal_set_fifo_size(usb_dwc_hal_context_t *hal, const usb_dwc_hal_fifo_config_t *fifo_config)
 {
-    HAL_ASSERT((fifo_config->rx_fifo_lines + fifo_config->nptx_fifo_lines + fifo_config->ptx_fifo_lines) <= USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES);
+    HAL_ASSERT((fifo_config->rx_fifo_lines + fifo_config->nptx_fifo_lines + fifo_config->ptx_fifo_lines) <= USB_DWC_FIFO_TOTAL_USABLE_LINES);
     //Check that none of the channels are active
-    for (int i = 0; i < USB_DWC_HAL_NUM_CHAN; i++) {
+    for (int i = 0; i < USB_DWC_NUM_HOST_CHAN; i++) {
         if (hal->channels.hdls[i] != NULL) {
             HAL_ASSERT(!hal->channels.hdls[i]->flags.active);
         }
@@ -208,11 +208,11 @@ bool usb_dwc_hal_chan_alloc(usb_dwc_hal_context_t *hal, usb_dwc_hal_chan_t *chan
 {
     HAL_ASSERT(hal->flags.fifo_sizes_set);  //FIFO sizes should be set befor attempting to allocate a channel
     //Attempt to allocate channel
-    if (hal->channels.num_allocd == USB_DWC_HAL_NUM_CHAN) {
+    if (hal->channels.num_allocd == USB_DWC_NUM_HOST_CHAN) {
         return false;    //Out of free channels
     }
     int chan_idx = -1;
-    for (int i = 0; i < USB_DWC_HAL_NUM_CHAN; i++) {
+    for (int i = 0; i < USB_DWC_NUM_HOST_CHAN; i++) {
         if (hal->channels.hdls[i] == NULL) {
             hal->channels.hdls[i] = chan_obj;
             chan_idx = i;

components/soc/esp32s2/include/soc/Kconfig.soc_caps.in

@@ -719,9 +719,9 @@ config SOC_SPIRAM_SUPPORTED
     bool
     default y
 
-config SOC_USB_PERIPH_NUM
-    bool
-    default y
+config SOC_USB_OTG_PERIPH_NUM
+    int
+    default 1
 
 config SOC_SHA_DMA_MAX_BUFFER_SIZE
     int

components/soc/esp32s2/include/soc/soc_caps.h

@@ -320,8 +320,7 @@
 #define SOC_SPIRAM_SUPPORTED    1
 
 /*-------------------------- USB CAPS ----------------------------------------*/
-#define SOC_USB_PERIPH_NUM 1
-
+#define SOC_USB_OTG_PERIPH_NUM          (1U)
 
 /*--------------------------- SHA CAPS ---------------------------------------*/
 /* Max amount of bytes in a single DMA operation is 4095,

components/soc/esp32s3/include/soc/Kconfig.soc_caps.in

@@ -815,9 +815,9 @@ config SOC_UART_REQUIRE_CORE_RESET
     bool
     default y
 
-config SOC_USB_PERIPH_NUM
-    bool
-    default y
+config SOC_USB_OTG_PERIPH_NUM
+    int
+    default 1
 
 config SOC_SHA_DMA_MAX_BUFFER_SIZE
     int

components/soc/esp32s3/include/soc/soc_caps.h

@@ -333,7 +333,7 @@
 #define SOC_UART_REQUIRE_CORE_RESET (1)
 
 /*-------------------------- USB CAPS ----------------------------------------*/
-#define SOC_USB_PERIPH_NUM 1
+#define SOC_USB_OTG_PERIPH_NUM          (1U)
 
 
 /*--------------------------- SHA CAPS ---------------------------------------*/

components/usb/hcd_dwc.c

@@ -53,7 +53,7 @@ typedef struct {
  *
  * RXFIFO
  * - Recommended: ((LPS/4) * 2) + 2
- * - Actual: Whatever leftover size: USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES(200) - 48 - 48 = 104
+ * - Actual: Whatever leftover size: USB_DWC_FIFO_TOTAL_USABLE_LINES(200) - 48 - 48 = 104
  * - Worst case can accommodate two packets of 204 bytes, or one packet of 408
  * NPTXFIFO
  * - Recommended: (LPS/4) * 2
@@ -81,7 +81,7 @@ const fifo_mps_limits_t mps_limits_default = {
  *
  * RXFIFO
  * - Recommended: ((LPS/4) * 2) + 2
- * - Actual: Whatever leftover size: USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES(200) - 32 - 16 = 152
+ * - Actual: Whatever leftover size: USB_DWC_FIFO_TOTAL_USABLE_LINES(200) - 32 - 16 = 152
  * - Worst case can accommodate two packets of 300 bytes or one packet of 600 bytes
  * NPTXFIFO
  * - Recommended: (LPS/4) * 2
@@ -117,7 +117,7 @@ const fifo_mps_limits_t mps_limits_bias_rx = {
  * - Worst case can accommodate one packet of 64 bytes
  * PTXFIFO
  * - Recommended: (LPS/4) * 2
- * - Actual: Whatever leftover size: USB_DWC_HAL_FIFO_TOTAL_USABLE_LINES(200) - 34 - 16 = 150
+ * - Actual: Whatever leftover size: USB_DWC_FIFO_TOTAL_USABLE_LINES(200) - 34 - 16 = 150
  * - Worst case can accommodate two packets of 300 bytes or one packet of 600 bytes
  */
 const usb_dwc_hal_fifo_config_t fifo_config_bias_ptx = {
@@ -137,7 +137,7 @@ const fifo_mps_limits_t mps_limits_bias_ptx = {
 
 #define XFER_LIST_LEN_CTRL                      3   // One descriptor for each stage
 #define XFER_LIST_LEN_BULK                      2   // One descriptor for transfer, one to support an extra zero length packet
-#define XFER_LIST_LEN_INTR                      32
+#define XFER_LIST_LEN_INTR                      FRAME_LIST_LEN
 #define XFER_LIST_LEN_ISOC                      FRAME_LIST_LEN  // Same length as the frame list makes it easier to schedule. Must be power of 2
 
 // ------------------------ Flags --------------------------
@@ -963,7 +963,7 @@ static port_t *port_obj_alloc(void)
 {
     port_t *port = calloc(1, sizeof(port_t));
     usb_dwc_hal_context_t *hal = malloc(sizeof(usb_dwc_hal_context_t));
-    void *frame_list = heap_caps_aligned_calloc(USB_DWC_HAL_FRAME_LIST_MEM_ALIGN, FRAME_LIST_LEN, sizeof(uint32_t), MALLOC_CAP_DMA);
+    void *frame_list = heap_caps_aligned_calloc(USB_DWC_FRAME_LIST_MEM_ALIGN, FRAME_LIST_LEN, sizeof(uint32_t), MALLOC_CAP_DMA);
     SemaphoreHandle_t port_mux = xSemaphoreCreateMutex();
     if (port == NULL || hal == NULL || frame_list == NULL || port_mux == NULL) {
         free(port);
@@ -1594,7 +1594,7 @@ static dma_buffer_block_t *buffer_block_alloc(usb_transfer_type_t type)
         break;
     }
     dma_buffer_block_t *buffer = calloc(1, sizeof(dma_buffer_block_t));
-    void *xfer_desc_list = heap_caps_aligned_calloc(USB_DWC_HAL_DMA_MEM_ALIGN, desc_list_len, sizeof(usb_dwc_ll_dma_qtd_t), MALLOC_CAP_DMA);
+    void *xfer_desc_list = heap_caps_aligned_calloc(USB_DWC_QTD_LIST_MEM_ALIGN, desc_list_len, sizeof(usb_dwc_ll_dma_qtd_t), MALLOC_CAP_DMA);
     if (buffer == NULL || xfer_desc_list == NULL) {
         free(buffer);
         heap_caps_free(xfer_desc_list);
@@ -1642,22 +1642,6 @@ static bool pipe_alloc_hcd_support_verification(const usb_ep_desc_t *ep_desc, co
         return false;
     }
 
-    // Check if the pipe's interval is compatible with the periodic frame list's length
-    if (type == USB_TRANSFER_TYPE_INTR &&
-            (ep_desc->bInterval > FRAME_LIST_LEN)) {
-        ESP_LOGE(HCD_DWC_TAG, "bInterval value (%d) of Interrupt pipe exceeds max supported limit",
-                 ep_desc->bInterval);
-        return false;
-    }
-
-    if (type == USB_TRANSFER_TYPE_ISOCHRONOUS &&
-            ((1 << (ep_desc->bInterval - 1)) > FRAME_LIST_LEN)) {
-        // (where 0 < 2^(bInterval - 1) <= FRAME_LIST_LEN)
-        ESP_LOGE(HCD_DWC_TAG, "bInterval value (%d) of Isochronous pipe exceeds max supported limit",
-                 ep_desc->bInterval);
-        return false;
-    }
-
     // Check if pipe MPS exceeds HCD MPS limits (due to DWC FIFO sizing)
     int limit;
     if (USB_EP_DESC_GET_EP_DIR(ep_desc)) { // IN
@@ -1710,12 +1694,16 @@ static void pipe_set_ep_char(const hcd_pipe_config_t *pipe_config, usb_transfer_
     ep_char->dev_addr = pipe_config->dev_addr;
     ep_char->ls_via_fs_hub = (port_speed == USB_SPEED_FULL && pipe_config->dev_speed == USB_SPEED_LOW);
     // Calculate the pipe's interval in terms of USB frames
+    // @see USB-OTG programming guide chapter 6.5 for more information
     if (type == USB_TRANSFER_TYPE_INTR || type == USB_TRANSFER_TYPE_ISOCHRONOUS) {
-        int interval_frames;
+        unsigned int interval_frames;
+        unsigned int xfer_list_len;
         if (type == USB_TRANSFER_TYPE_INTR) {
             interval_frames = pipe_config->ep_desc->bInterval;
+            xfer_list_len = XFER_LIST_LEN_INTR;
         } else {
             interval_frames = (1 << (pipe_config->ep_desc->bInterval - 1));
+            xfer_list_len = XFER_LIST_LEN_ISOC;
         }
         // Round down interval to nearest power of 2
         if (interval_frames >= 32) {
@@ -1733,7 +1721,7 @@ static void pipe_set_ep_char(const hcd_pipe_config_t *pipe_config, usb_transfer_
         }
         ep_char->periodic.interval = interval_frames;
         // We are the Nth pipe to be allocated. Use N as a phase offset
-        ep_char->periodic.phase_offset_frames = pipe_idx & (XFER_LIST_LEN_ISOC - 1);
+        ep_char->periodic.phase_offset_frames = pipe_idx & (xfer_list_len - 1);
     } else {
         ep_char->periodic.interval = 0;
         ep_char->periodic.phase_offset_frames = 0;

components/usb/hub.c

@@ -449,9 +449,16 @@ static bool enum_stage_transfer_check(enum_ctrl_t *enum_ctrl)
         return false;
     }
     // Check IN transfer returned the expected correct number of bytes
-    if (enum_ctrl->expect_num_bytes != 0 && enum_ctrl->expect_num_bytes != transfer->actual_num_bytes) {
-        ESP_LOGE(HUB_DRIVER_TAG, "Incorrect number of bytes returned %d: %s", transfer->actual_num_bytes, enum_stage_strings[enum_ctrl->stage]);
-        return false;
+    if (enum_ctrl->expect_num_bytes != 0 && transfer->actual_num_bytes != enum_ctrl->expect_num_bytes) {
+        if (transfer->actual_num_bytes > enum_ctrl->expect_num_bytes) {
+            // The device returned more bytes than requested.
+            // This violates the USB specs chapter 9.3.5, but we can continue
+            ESP_LOGW(HUB_DRIVER_TAG, "Incorrect number of bytes returned %d: %s", transfer->actual_num_bytes, enum_stage_strings[enum_ctrl->stage]);
+        } else {
+            // The device returned less bytes than requested. We cannot continue.
+            ESP_LOGE(HUB_DRIVER_TAG, "Incorrect number of bytes returned %d: %s", transfer->actual_num_bytes, enum_stage_strings[enum_ctrl->stage]);
+            return false;
+        }
     }
 
     // Stage specific checks and updates

examples/peripherals/.build-test-rules.yml

@@ -191,7 +191,7 @@ examples/peripherals/uart/uart_echo_rs485:
 
 examples/peripherals/usb:
   disable:
-    - if: SOC_USB_PERIPH_NUM != 1
+    - if: SOC_USB_OTG_SUPPORTED != 1
 
 examples/peripherals/wave_gen:
   enable:

examples/peripherals/usb/host/usb_host_lib/main/class_driver.c

@@ -70,7 +70,6 @@ static void action_get_info(class_driver_t *driver_obj)
     ESP_ERROR_CHECK(usb_host_device_info(driver_obj->dev_hdl, &dev_info));
     ESP_LOGI(TAG, "\t%s speed", (dev_info.speed == USB_SPEED_LOW) ? "Low" : "Full");
     ESP_LOGI(TAG, "\tbConfigurationValue %d", dev_info.bConfigurationValue);
-    //Todo: Print string descriptors
 
     //Get the device descriptor next
     driver_obj->actions &= ~ACTION_GET_DEV_INFO;

examples/system/.build-test-rules.yml

@@ -22,7 +22,10 @@ examples/system/console/advanced:
 
 examples/system/console/advanced_usb_cdc:
   disable:
-    - if: SOC_USB_PERIPH_NUM == 0
+    - if: SOC_USB_OTG_SUPPORTED != 1
+  depends_components:
+    - console
+    - vfs
 
 examples/system/console/basic:
   disable: