Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

在USB例子里面，esp32-s2-kaluga 开发板无法点亮LCD。 #124

Closed
xuhongv opened this issue Aug 19, 2021 · 7 comments
Closed

在USB例子里面，esp32-s2-kaluga 开发板无法点亮LCD。 #124

xuhongv opened this issue Aug 19, 2021 · 7 comments

Comments

@xuhongv
Copy link

xuhongv commented Aug 19, 2021

Environment

  • Development Kit: esp32-s2-kaluga-Kit V1.2 , ESP-LyraP-LCD32 v1.1
  • IDF version : v4.4-dev-2184-g166c30e7b2
  • Build System: CMake
  • Compiler version: xtensa-esp32-elf-gcc (crosstool-NG esp-2021r1) 8.4.0
  • Operating System: Linux
  • Power Supply: USB
  • project ： examples /usb /host /usb_camera_lcd_display

Problem Description

在usb_camera_lcd_display例子里面，已经按照 README 文档里面按照好 ESP-IDF 环境，并且打好了补丁。

但是在 esp32-s2-kaluga 开发板无法正常驱动LCD屏幕，开启了使能 boot animation 开启开机动画，但依然无法点亮。

下面是设备运行日志：

I (21) boot: ESP-IDF v4.4-dev-2184-g166c30e7b2-dirty 2nd stage bootloader
I (21) boot: compile time 23:33:05
I (21) boot: chip revision: 0
I (23) qio_mode: Enabling default flash chip QIO
I (27) boot.esp32s2: SPI Speed      : 80MHz
I (31) boot.esp32s2: SPI Mode       : QIO
I (35) boot.esp32s2: SPI Flash Size : 4MB
I (39) boot: Enabling RNG early entropy source...
I (43) boot: Partition Table:
I (46) boot: ## Label            Usage          Type ST Offset   Length
I (52) boot:  0 nvs              WiFi data        01 02 00009000 00006000
I (59) boot:  1 phy_init         RF data          01 01 0000f000 00001000
I (65) boot:  2 factory          factory app      00 00 00010000 00177000
I (72) boot:  3 storage          Unknown data     01 82 00187000 001f4000
I (78) boot: End of partition table
I (82) esp_image: segment 0: paddr=00010020 vaddr=3f000020 size=0ec4ch ( 60492) map
I (99) esp_image: segment 1: paddr=0001ec74 vaddr=3ffc1d90 size=013a4h (  5028) load
I (101) esp_image: segment 2: paddr=00020020 vaddr=40080020 size=43ed4h (278228) map
I (152) esp_image: segment 3: paddr=00063efc vaddr=3ffc3134 size=00b20h (  2848) load
I (152) esp_image: segment 4: paddr=00064a24 vaddr=40024000 size=0dd88h ( 56712) load
I (168) esp_image: segment 5: paddr=000727b4 vaddr=50000000 size=00010h (    16) load
I (175) boot: Loaded app from partition at offset 0x10000
I (175) boot: Disabling RNG early entropy source...
I (186) cache: Instruction cache 	: size 8KB, 4Ways, cache line size 32Byte
I (186) cache: Data cache 		: size 8KB, 4Ways, cache line size 32Byte
I (188) spiram: Found 16MBit SPI RAM device
I (192) spiram: SPI RAM mode: sram 40m
I (195) spiram: PSRAM initialized, cache is in normal (1-core) mode.
I (201) cpu_start: Pro cpu up.
I (614) spiram:€槝�0f�捞槅榝f
R玍隟W仮曂褋z-5R蘒 (623) cpu_start: Pro cpu start user code
I (623) cpu_start: cpu freq: 240000000
I (623) cpu_start: Application information:
I (623) cpu_start: Project name:     uvc_mjpeg_lcd
I (628) cpu_start: App version:      b643b6a-dirty
I (632) cpu_start: Compile time:     Aug 19 2021 23:35:26
I (638) cpu_start: ELF file SHA256:  75fae21acf144609...
I (643) cpu_start: ESP-IDF:          v4.4-dev-2184-g166c30e7b2-dirty
I (649) heap_init: Initializing. RAM available for dynamic allocation:
I (655) heap_init: At 3FF9E000 len 00002000 (8 KiB): RTCRAM
I (660) heap_init: At 3FFC48A8 len 00037758 (221 KiB): DRAM
I (665) heap_init: At 3FFFC000 len 00003A10 (14 KiB): DRAM
I (671) spiram: Adding pool of 2048K of external SPI memory to heap allocator
I (678) spi_flash: detected chip: gd
I (681) spi_flash: flash io: qio
I (684) cpu_start: Starting scheduler on PRO CPU.
I (688) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (688) spi_bus: SPI2 bus created
I (698) spi_bus: SPI2 bus device added, CS=11 Mode=0 Speed=40000000
I (898) lcd st7789: MADCTL=60
I (898) uvc_demo: Screen name:ST7789 | width:320 | height:240
I (4408) UVC_STREAM: UVC Streaming Config Succeed
I (4458) UVC_STREAM: UVC Streaming Starting
@leeebo
Copy link
Collaborator

leeebo commented Aug 20, 2021

ESP-LyraP-LCD32 v1.1 may have different LCD controller types (ST7789 or ILI9341), as the default configuration does not work (ST7789), please modify your controller type to SCREEN_CONTROLLER_ILI9341 then try again.

@xuhongv
Copy link
Author

xuhongv commented Aug 20, 2021

i try it @leeebo

@xuhongv
Copy link
Author

xuhongv commented Aug 21, 2021 •
edited

你好，我试着更新了最新版的 esp-iot-solution 仓库，但是报错异常如下，看样子是 CMake 语法，您看看是不是你们开发同事在合并代码出问题了。 @leeebo

../main/cmd_wifi.c:38:10: fatal error: tinyusb.h: No such file or directory
 #include "tinyusb.h"
          ^~~~~~~~~~~
compilation terminated.

看到了提示：

[0/1] Re-running CMake...
-- Building ESP-IDF components for target esp32s2
CMake Warning at /mnt/d/ESPRESSIF/Linux_Windows/usb_camera_lcd_display/esp-idf/tools/cmake/build.cmake:478 (message):
  "idf_component.yml" file was found for components:


        /mnt/d/ESPRESSIF/Linux_Windows/usb_camera_lcd_display/esp-iot-solution/components/usb/tinyusb


  However, the component manager is not enabled.
Call Stack (most recent call first):
  /mnt/d/ESPRESSIF/Linux_Windows/usb_camera_lcd_display/esp-idf/tools/cmake/project.cmake:361 (idf_build_process)
  CMakeLists.txt:20 (project)

@leeebo
Copy link
Collaborator

leeebo commented Aug 23, 2021

@xuhongv From my near test, the usb-dongle example works as normal with the latest master ESP-IDF, please check if your development environment is installed correctly (include IDF submodules), and try to build other usb/device examples.

@leeebo
Copy link
Collaborator

leeebo commented Aug 23, 2021

However, the component manager is not enabled.

The warning message should not cause your problem, while if you want to remove them, you can Install ESP-IDF component manager with:

  1. . ./export.sh to add ESP-IDF environment values
  2. pip install idf-component-manager --upgrade

@xuhongv
Copy link
Author

xuhongv commented Aug 24, 2021

@leeebo 请问这个 usb/device examples 的运行分支是最新的master分支，还是指定的 commitID ？

1）我使用最新的master分支代码，报错：

CMake Error at /mnt/d/ESPRESSIF/Linux_Windows/esp-idf-s3/esp-idf/tools/cmake/component.cmake:306 (message):
  Include directory
  '/mnt/d/ESPRESSIF/Linux_Windows/esp-idf-s3/esp-idf/components/cbor/tinycbor/src'
  is not a directory.
Call Stack (most recent call first):
  /mnt/d/ESPRESSIF/Linux_Windows/esp-idf-s3/esp-idf/tools/cmake/component.cmake:479 (__component_add_include_dirs)
  /mnt/d/ESPRESSIF/Linux_Windows/esp-idf-s3/esp-idf/components/cbor/CMakeLists.txt:1 (idf_component_register)


-- Configuring incomplete, errors occurred!

2）我使用 README 文档中指定的分支，而且尝试更新了子模块管理组件，如下：

xuhongv@xuhongv:/mnt/d/ESPRESSIF/Linux_Windows/usb_camera_lcd_display/esp-idf$ pip install idf-component-manager --upgrade
Collecting idf-component-manager
  Downloading idf_component_manager-0.2.100b0-py3-none-any.whl (49 kB)
     |████████████████████████████████| 49 kB 1.5 MB/s
Collecting requests
  Downloading requests-2.26.0-py2.py3-none-any.whl (62 kB)
     |████████████████████████████████| 62 kB 883 kB/s
Collecting schema
  Downloading schema-0.7.4-py2.py3-none-any.whl (16 kB)
Requirement already satisfied: future in /home/xuhongv/.espressif/python_env/idf4.4_py3.6_env/lib/python3.6/site-packages (from idf-component-manager) (0.18.2)
Collecting pyyaml
  Downloading PyYAML-5.4.1-cp36-cp36m-manylinux1_x86_64.whl (640 kB)
     |████████████████████████████████| 640 kB 167 kB/s
Collecting requests-toolbelt
  Downloading requests_toolbelt-0.9.1-py2.py3-none-any.whl (54 kB)
     |████████████████████████████████| 54 kB 254 kB/s
Collecting semantic-version>="2.8"
  Downloading semantic_version-2.8.5-py2.py3-none-any.whl (15 kB)
Requirement already satisfied: six in /home/xuhongv/.espressif/python_env/idf4.4_py3.6_env/lib/python3.6/site-packages (from idf-component-manager) (1.15.0)
Collecting tqdm
  Downloading tqdm-4.62.2-py2.py3-none-any.whl (76 kB)
     |████████████████████████████████| 76 kB 249 kB/s
Collecting charset-normalizer~=2.0.0
  Downloading charset_normalizer-2.0.4-py3-none-any.whl (36 kB)
Collecting certifi>=2017.4.17
  Downloading certifi-2021.5.30-py2.py3-none-any.whl (145 kB)
     |████████████████████████████████| 145 kB 224 kB/s
Collecting urllib3<1.27,>=1.21.1
  Downloading urllib3-1.26.6-py2.py3-none-any.whl (138 kB)
     |████████████████████████████████| 138 kB 482 kB/s
Collecting idna<4,>=2.5
  Downloading idna-3.2-py3-none-any.whl (59 kB)
     |████████████████████████████████| 59 kB 291 kB/s
Collecting contextlib2>=0.5.5
  Downloading contextlib2-21.6.0-py2.py3-none-any.whl (13 kB)
Installing collected packages: urllib3, idna, charset-normalizer, certifi, requests, contextlib2, tqdm, semantic-version, schema, requests-toolbelt, pyyaml, idf-component-manager
Successfully installed certifi-2021.5.30 charset-normalizer-2.0.4 contextlib2-21.6.0 idf-component-manager-0.2.100b0 idna-3.2 pyyaml-5.4.1 requests-2.26.0 requests-toolbelt-0.9.1 schema-0.7.4 semantic-version-2.8.5 tqdm-4.62.2 urllib3-1.26.6
WARNING: You are using pip version 21.0.1; however, version 21.2.4 is available.
You should consider upgrading via the '/home/xuhongv/.espressif/python_env/idf4.4_py3.6_env/bin/python -m pip install --upgrade pip' command.

再一次编译，如下错误。

../main/CLI_Commands.c:54:10: fatal error: tusb_cdc_acm.h: No such file or directory
 #include "tusb_cdc_acm.h"
          ^~~~~~~~~~~~~~~~
compilation terminated.

zhanzhaocheng pushed a commit that referenced this issue Aug 30, 2021
@leeebo
fix(examples/usb): cmakelist add default iot_solution path
f8dc3f3 
fix #124, fix #126
@leeebo
Copy link
Collaborator

leeebo commented Aug 30, 2021

@xuhongv For convenience, we have added some modify in examples' cmakelists, you can build with the IDF b63ec47238fd6a or latest master directly.

@xuhongv xuhongv closed this as completed Nov 16, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@leeebo @xuhongv