feat(esptool): add option to dump whole flash based on detected size

Closes #461

docs/en/esptool/basic-commands.rst

@@ -105,6 +105,14 @@ The read_flash command allows reading back the contents of flash. The arguments
 
     esptool.py -p PORT -b 460800 read_flash 0 0x200000 flash_contents.bin
 
+
+It is also possible to autodetect flash size by using ``ALL`` as size. The above example with autodetection would look like this:
+
+::
+
+    esptool.py -p PORT -b 460800 read_flash 0 ALL flash_contents.bin
+
+
 .. note::
 
     If ``write_flash`` updated the boot image's :ref:`flash mode and flash size <flash-modes>` during flashing then these bytes may be different when read back.

esptool/__init__.py

@@ -39,6 +39,7 @@
 import traceback
 
 from esptool.cmds import (
+    DETECTED_FLASH_SIZES,
     chip_id,
     detect_chip,
     detect_flash_size,
@@ -526,7 +527,9 @@ def add_spi_flash_subparsers(parent, allow_keep, auto_detect):
     add_spi_connection_arg(parser_read_flash)
     parser_read_flash.add_argument("address", help="Start address", type=arg_auto_int)
     parser_read_flash.add_argument(
-        "size", help="Size of region to dump", type=arg_auto_int
+        "size",
+        help="Size of region to dump. Use `ALL` to read to the end of flash.",
+        type=arg_auto_size,
     )
     parser_read_flash.add_argument("filename", help="Name of binary dump")
     parser_read_flash.add_argument(
@@ -570,8 +573,9 @@ def add_spi_flash_subparsers(parent, allow_keep, auto_detect):
     )
     parser_erase_region.add_argument(
         "size",
-        help="Size of region to erase (must be multiple of 4096)",
-        type=arg_auto_int,
+        help="Size of region to erase (must be multiple of 4096). "
+        "Use `ALL` to erase to the end of flash.",
+        type=arg_auto_size,
     )
 
     parser_merge_bin = subparsers.add_parser(
@@ -827,6 +831,23 @@ def flash_xmc_startup():
                         "than 16MB, in case of failure use --no-stub."
                     )
 
+        if getattr(args, "size", "") == "all":
+            if esp.secure_download_mode:
+                raise FatalError(
+                    "Detecting flash size is not supported in secure download mode. "
+                    "Set an exact size value."
+                )
+            # detect flash size
+            flash_id = esp.flash_id()
+            size_id = flash_id >> 16
+            size_str = DETECTED_FLASH_SIZES.get(size_id)
+            if size_str is None:
+                raise FatalError(
+                    "Detecting flash size failed. Set an exact size value."
+                )
+            print(f"Detected flash size: {size_str}")
+            args.size = flash_size_bytes(size_str)
+
         if esp.IS_STUB and hasattr(args, "address") and hasattr(args, "size"):
             if args.address + args.size > 0x1000000:
                 print(
@@ -871,6 +892,11 @@ def arg_auto_int(x):
     return int(x, 0)
 
 
+def arg_auto_size(x):
+    x = x.lower()
+    return x if x == "all" else arg_auto_int(x)
+
+
 def get_port_list():
     if list_ports is None:
         raise FatalError(

test/test_esptool.py

@@ -776,6 +776,10 @@ def test_region_erase(self):
         empty = self.readback(0x10000, 0x1000)
         assert empty == b"\xFF" * 0x1000
 
+    def test_region_erase_all(self):
+        res = self.run_esptool("erase_region 0x0 ALL")
+        assert re.search(r"Detected flash size: \d+[KM]B", res) is not None
+
     def test_large_region_erase(self):
         # verifies that erasing a large region doesn't time out
         self.run_esptool("erase_region 0x0 0x100000")