etcd:etcdserverpb.Watch Unavailable #9576
Comments
You should set up a separate Prometheus node_exporter if you want to persist previous metrics data. Metrics served via etcd does not get stored on disk. So on reboot, etcd starts over collecting metrics. |
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Aug 3, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
This patch improves the behavior by:
1. Performing a deeper analysis during stream closure to more conclusively
determine that a leader has actually been lost before propagating a
ErrGRPCNoLeader error.
2. Returning a ErrGRPCWatchCanceled error if no conclusion can be drawn
regarding leader loss.
There remains an assumption that absence of leader loss evidence represents a
client cancellation, but in practice this seems less likely to break down
whereas client cancellations are frequent and expected.
This is a continuation of the work already done in etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Aug 3, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
This patch improves the behavior by:
1. Performing a deeper analysis during stream closure to more conclusively
determine that a leader has actually been lost before propagating a
ErrGRPCNoLeader error.
2. Returning a ErrGRPCWatchCanceled error if no conclusion can be drawn
regarding leader loss.
There remains an assumption that absence of evidence of leader loss means a
client cancelled, but in practice this seems less likely to break down whereas
client cancellations are frequent and expected.
This is a continuation of the work already done in etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Aug 5, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
This patch improves the behavior by:
1. Performing a deeper analysis during stream closure to more conclusively
determine that a leader has actually been lost before propagating a
ErrGRPCNoLeader error.
2. Returning a ErrGRPCWatchCanceled error if no conclusion can be drawn
regarding leader loss.
There remains an assumption that absence of evidence of leader loss means a
client cancelled, but in practice this seems less likely to break down whereas
client cancellations are frequent and expected.
This is a continuation of the work already done in etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Sep 29, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Sep 29, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Sep 30, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Sep 30, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Nov 18, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
ironcladlou
added a commit
to ironcladlou/etcd
that referenced
this issue
Nov 18, 2020
Before this patch, a client which cancels the context for a watch results in the
server generating a `rpctypes.ErrGRPCNoLeader` error that leads the recording of
a gRPC `Unavailable` metric in association with the client watch cancellation.
The metric looks like this:
grpc_server_handled_total{grpc_code="Unavailable",grpc_method="Watch",grpc_service="etcdserverpb.Watch",grpc_type="bidi_stream"}
So, the watch server has misidentified the error as a server error and then
propagates the mistake to metrics, leading to a false indicator that the leader
has been lost. This false signal then leads to false alerting.
The commit 9c103dd introduced an interceptor which wraps
watch streams requiring a leader, causing those streams to be actively canceled
when leader loss is detected.
However, the error handling code assumes all stream context cancellations are
from the interceptor. This assumption is broken when the context was canceled
because of a client stream cancelation.
The core challenge is lack of information conveyed via `context.Context` which
is shared by both the send and receive sides of the stream handling and is
subject to cancellation by all paths (including the gRPC library itself). If any
piece of the system cancels the shared context, there's no way for a context
consumer to understand who cancelled the context or why.
To solve the ambiguity of the stream interceptor code specifically, this patch
introduces a custom context struct which the interceptor uses to expose a custom
error through the context when the interceptor decides to actively cancel a
stream. Now the consuming side can more safely assume a generic context
cancellation can be propagated as a cancellation, and the server generated
leader error is preserved and propagated normally without any special inference.
When a client cancels the stream, there remains a race in the error handling
code between the send and receive goroutines whereby the underlying gRPC error
is lost in the case where the send path returns and is handled first, but this
issue can be taken separately as no matter which paths wins, we can detect a
generic cancellation.
This is a replacement of etcd-io#11375.
Fixes etcd-io#10289, etcd-io#9725, etcd-io#9576, etcd-io#9166
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
i start my etcd , i find some msg from metric:
but,when i restart etcd , this msg never show again.
The text was updated successfully, but these errors were encountered: