Please contact Tech Support if you are not sure which firmware you should flash.
Version | Hardware | File Name | Variant A | Variant B |
---|---|---|---|---|
v1 | 1 DECODER + 4 ECU (Black) | App.zbo |
221011 | / |
v2 | 1 INTEGRATED ECU (Black) | Appa.zbo |
221128 | 221128 |
MARK 3.0 | 1 DECODER + 4 ECU (Black) | CX_CAN.bin |
220301 | 220301 |
MARK 3.5 | 1 INTEGRATED ECU (Black) | App.zbo |
221015 | 221023 |
Last Update: 2022-11-28
Version | Hardware | File Name | Version |
---|---|---|---|
v2 | 1 INTEGRATED ECU (Black) | Appa.zbo |
221128 |
MARK 3.0 | 1 DECODER + 4 ECU (Black) | CX_CAN.bin |
220301 |
MARK 3.5 | 1 INTEGRATED ECU (Black) | App.zbo |
221023 |
Last Update: 2022-11-28
Version | Hardware | File Name | Version |
---|---|---|---|
MARK 1.0 | 1 INTEGRATED ECU (Blue) | Appb.zbo |
221011 |
MARK 1.5 | 1 INTEGRATED ECU (Red) | DOOR.bin |
230108 |
MARK 2.0 | 1 INTEGRATED ECU (Black) | CX_CAN.bin |
231121 |
Last Update: 2023-12-13
Prepare a microSD (32GB or below capacity is preferred). Make sure it is in FAT32 format.
Get the update files ready. Place them under the root of the microSD. Eject it from the card reader afterwards.
Disconnect the control unit from power. Insert the microSD into the control unit and reconnect the control unit. Wait until the update is finshed and eject the microSD.
The LED should be flashing constantly now and you are all set!