SD2IEC Snoop is a configuration utility for the sd2iec floppy drive emulator for the C64.
The DOS commands implemented by sd2iec are hard to remember and complicated to type. SD2IEC Snoop is a basic program running on the real C64. It shows a menu that provides the following functions.
- get sd2iec version
- change device address
- create d64 image file
- load+run 1st PRG on the SD card
- show a help page with the raw DOS commands (in case you still want to type them)
It is meant to be placed as second file on the SD card as the first file typically is a file browser.
When sd2iec's drive address is changed permanantly, one should change the initial device adress in the program.
If no device listens to 8, the program hangs at the input#1 line.
This project is developed with VS64. Feel free to fork this repository and create a pull request.
sd2iec wiki https://www.c64-wiki.com/wiki/SD2IEC sd2iec firmware https://sd2iec.de/
Ingo Korb for his continuous efforts on SD2IEC
rolandshacks for the great VS64 development environment extension for Visual Studio Code