importet sammy NJ2

Documentation/ABI/testing/sysfs-devices-power

@@ -96,16 +96,26 @@ Description:
 		is read-only.  If the device is not enabled to wake up the
 		system from sleep states, this attribute is not present.
 
-What:		/sys/devices/.../power/wakeup_hit_count
-Date:		September 2010
+What:		/sys/devices/.../power/wakeup_abort_count
+Date:		February 2012
 Contact:	Rafael J. Wysocki <rjw@sisk.pl>
 Description:
-		The /sys/devices/.../wakeup_hit_count attribute contains the
+		The /sys/devices/.../wakeup_abort_count attribute contains the
 		number of times the processing of a wakeup event associated with
-		the device might prevent the system from entering a sleep state.
-		This attribute is read-only.  If the device is not enabled to
-		wake up the system from sleep states, this attribute is not
-		present.
+		the device might have aborted system transition into a sleep
+		state in progress.  This attribute is read-only.  If the device
+		is not enabled to wake up the system from sleep states, this
+		attribute is not present.
+
+What:		/sys/devices/.../power/wakeup_expire_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_expire_count attribute contains the
+		number of times a wakeup event associated with the device has
+		been reported with a timeout that expired.  This attribute is
+		read-only.  If the device is not enabled to wake up the system
+		from sleep states, this attribute is not present.
 
 What:		/sys/devices/.../power/wakeup_active
 Date:		September 2010
@@ -148,6 +158,17 @@ Description:
 		not enabled to wake up the system from sleep states, this
 		attribute is not present.
 
+What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
+		contains the total time the device has been preventing
+		opportunistic transitions to sleep states from occuring.
+		This attribute is read-only.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is not
+		present.
+
 What:		/sys/devices/.../power/autosuspend_delay_ms
 Date:		September 2010
 Contact:	Alan Stern <stern@rowland.harvard.edu>

Documentation/ABI/testing/sysfs-power

@@ -172,3 +172,62 @@ Description:
 
 		Reading from this file will display the current value, which is
 		set to 1 MB by default.
+
+What:		/sys/power/autosleep
+Date:		April 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/autosleep file can be written one of the strings
+		returned by reads from /sys/power/state.  If that happens, a
+		work item attempting to trigger a transition of the system to
+		the sleep state represented by that string is queued up.  This
+		attempt will only succeed if there are no active wakeup sources
+		in the system at that time.  After every execution, regardless
+		of whether or not the attempt to put the system to sleep has
+		succeeded, the work item requeues itself until user space
+		writes "off" to /sys/power/autosleep.
+
+		Reading from this file causes the last string successfully
+		written to it to be returned.
+
+What:		/sys/power/wake_lock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_lock file allows user space to create
+		wakeup source objects and activate them on demand (if one of
+		those wakeup sources is active, reads from the
+		/sys/power/wakeup_count file block or return false).  When a
+		string without white space is written to /sys/power/wake_lock,
+		it will be assumed to represent a wakeup source name.  If there
+		is a wakeup source object with that name, it will be activated
+		(unless active already).  Otherwise, a new wakeup source object
+		will be registered, assigned the given name and activated.
+		If a string written to /sys/power/wake_lock contains white
+		space, the part of the string preceding the white space will be
+		regarded as a wakeup source name and handled as descrived above.
+		The other part of the string will be regarded as a timeout (in
+		nanoseconds) such that the wakeup source will be automatically
+		deactivated after it has expired.  The timeout, if present, is
+		set regardless of the current state of the wakeup source object
+		in question.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of it that are active at
+		the moment, separated with spaces.
+
+
+What:		/sys/power/wake_unlock
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wake_unlock file allows user space to deactivate
+		wakeup sources created with the help of /sys/power/wake_lock.
+		When a string is written to /sys/power/wake_unlock, it will be
+		assumed to represent the name of a wakeup source to deactivate.
+		If a wakeup source object of that name exists and is active at
+		the moment, it will be deactivated.
+
+		Reads from this file return a string consisting of the names of
+		wakeup sources created with the help of /sys/power/wake_lock
+		that are inactive at the moment, separated with spaces.

Documentation/DocBook/media/v4l/compat.xml

@@ -2410,6 +2410,35 @@ details.</para>
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.5</title>
+      <orderedlist>
+        <listitem>
+	  <para>Added integer menus, the new type will be
+	  V4L2_CTRL_TYPE_INTEGER_MENU.</para>
+        </listitem>
+        <listitem>
+	  <para>Added selection API for V4L2 subdev interface:
+	  &VIDIOC-SUBDEV-G-SELECTION; and
+	  &VIDIOC-SUBDEV-S-SELECTION;.</para>
+        </listitem>
+        <listitem>
+	  <para> Added <constant>V4L2_COLORFX_ANTIQUE</constant>,
+	  <constant>V4L2_COLORFX_ART_FREEZE</constant>,
+	  <constant>V4L2_COLORFX_AQUA</constant>,
+	  <constant>V4L2_COLORFX_SILHOUETTE</constant>,
+	  <constant>V4L2_COLORFX_SOLARIZATION</constant>,
+	  <constant>V4L2_COLORFX_VIVID</constant> and
+	  <constant>V4L2_COLORFX_ARBITRARY_CBCR</constant> menu items
+	  to the <constant>V4L2_CID_COLORFX</constant> control.</para>
+        </listitem>
+        <listitem>
+	  <para> Added <constant>V4L2_CID_COLORFX_CBCR</constant> control.</para>
+        </listitem>
+      </orderedlist>
+    </section>
+
+>>>>>>> 6491d1a... [media] V4L: Extend V4L2_CID_COLORFX with more image effects
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/controls.xml

@@ -285,18 +285,92 @@ minimum value disables backlight compensation.</entry>
 	  <row id="v4l2-colorfx">
 	    <entry><constant>V4L2_CID_COLORFX</constant></entry>
 	    <entry>enum</entry>
-	    <entry>Selects a color effect. Possible values for
-<constant>enum v4l2_colorfx</constant> are:
-<constant>V4L2_COLORFX_NONE</constant> (0),
-<constant>V4L2_COLORFX_BW</constant> (1),
-<constant>V4L2_COLORFX_SEPIA</constant> (2),
-<constant>V4L2_COLORFX_NEGATIVE</constant> (3),
-<constant>V4L2_COLORFX_EMBOSS</constant> (4),
-<constant>V4L2_COLORFX_SKETCH</constant> (5),
-<constant>V4L2_COLORFX_SKY_BLUE</constant> (6),
-<constant>V4L2_COLORFX_GRASS_GREEN</constant> (7),
-<constant>V4L2_COLORFX_SKIN_WHITEN</constant> (8) and
-<constant>V4L2_COLORFX_VIVID</constant> (9).</entry>
+	    <entry>Selects a color effect. The following values are defined:
+	    </entry>
+	  </row><row>
+	  <entry></entry>
+	  <entry></entry>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+		<row>
+		  <entry><constant>V4L2_COLORFX_NONE</constant>&nbsp;</entry>
+		  <entry>Color effect is disabled.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_ANTIQUE</constant>&nbsp;</entry>
+		  <entry>An aging (old photo) effect.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_ART_FREEZE</constant>&nbsp;</entry>
+		  <entry>Frost color effect.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_AQUA</constant>&nbsp;</entry>
+		  <entry>Water color, cool tone.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_BW</constant>&nbsp;</entry>
+		  <entry>Black and white.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_EMBOSS</constant>&nbsp;</entry>
+		  <entry>Emboss, the highlights and shadows replace light/dark boundaries
+		  and low contrast areas are set to a gray background.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_GRASS_GREEN</constant>&nbsp;</entry>
+		  <entry>Grass green.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_NEGATIVE</constant>&nbsp;</entry>
+		  <entry>Negative.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SEPIA</constant>&nbsp;</entry>
+		  <entry>Sepia tone.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKETCH</constant>&nbsp;</entry>
+		  <entry>Sketch.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKIN_WHITEN</constant>&nbsp;</entry>
+		  <entry>Skin whiten.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SKY_BLUE</constant>&nbsp;</entry>
+		  <entry>Sky blue.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SOLARIZATION</constant>&nbsp;</entry>
+		  <entry>Solarization, the image is partially reversed in tone,
+		  only color values above or below a certain threshold are inverted.
+		  </entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SILHOUETTE</constant>&nbsp;</entry>
+		  <entry>Silhouette (outline).</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_VIVID</constant>&nbsp;</entry>
+		  <entry>Vivid colors.</entry>
+		</row>
+		<row>
+		  <entry><constant>V4L2_COLORFX_SET_CBCR</constant>&nbsp;</entry>
+		  <entry>The Cb and Cr chroma components are replaced by fixed
+		  coefficients determined by <constant>V4L2_CID_COLORFX_CBCR</constant>
+		  control.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CID_COLORFX_CBCR</constant></entry>
+	    <entry>integer</entry>
+	    <entry>Determines the Cb and Cr coefficients for <constant>V4L2_COLORFX_SET_CBCR</constant>
+	    color effect. Bits [7:0] of the supplied 32 bit value are interpreted as
+	    Cr component, bits [15:8] as Cb component and bits [31:16] must be zero.
+	  </entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_ROTATE</constant></entry>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -127,6 +127,16 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.5</revnumber>
+	<date>2012-04-02</date>
+	<authorinitials>sa, sn</authorinitials>
+	<revremark>Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev
+	    selections API. Improved the description of V4L2_CID_COLORFX
+	    control, added V4L2_CID_COLORFX_CBCR control.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.4</revnumber>
 	<date>2012-01-25</date>

Documentation/android.txt

@@ -0,0 +1,121 @@
+				=============
+				A N D R O I D
+				=============
+
+Copyright (C) 2009 Google, Inc.
+Written by Mike Chan <mike@android.com>
+
+CONTENTS:
+---------
+
+1. Android
+  1.1 Required enabled config options
+  1.2 Required disabled config options
+  1.3 Recommended enabled config options
+2. Contact
+
+
+1. Android
+==========
+
+Android (www.android.com) is an open source operating system for mobile devices.
+This document describes configurations needed to run the Android framework on
+top of the Linux kernel.
+
+To see a working defconfig look at msm_defconfig or goldfish_defconfig
+which can be found at http://android.git.kernel.org in kernel/common.git
+and kernel/msm.git
+
+
+1.1 Required enabled config options
+-----------------------------------
+After building a standard defconfig, ensure that these options are enabled in
+your .config or defconfig if they are not already. Based off the msm_defconfig.
+You should keep the rest of the default options enabled in the defconfig
+unless you know what you are doing.
+
+ANDROID_PARANOID_NETWORK
+ASHMEM
+CONFIG_FB_MODE_HELPERS
+CONFIG_FONT_8x16
+CONFIG_FONT_8x8
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM
+DAB
+EARLYSUSPEND
+FB
+FB_CFB_COPYAREA
+FB_CFB_FILLRECT
+FB_CFB_IMAGEBLIT
+FB_DEFERRED_IO
+FB_TILEBLITTING
+HIGH_RES_TIMERS
+INOTIFY
+INOTIFY_USER
+INPUT_EVDEV
+INPUT_GPIO
+INPUT_MISC
+LEDS_CLASS
+LEDS_GPIO
+LOCK_KERNEL
+LkOGGER
+LOW_MEMORY_KILLER
+MISC_DEVICES
+NEW_LEDS
+NO_HZ
+POWER_SUPPLY
+PREEMPT
+RAMFS
+RTC_CLASS
+RTC_LIB
+SWITCH
+SWITCH_GPIO
+TMPFS
+UID_STAT
+UID16
+USB_FUNCTION
+USB_FUNCTION_ADB
+USER_WAKELOCK
+VIDEO_OUTPUT_CONTROL
+WAKELOCK
+YAFFS_AUTO_YAFFS2
+YAFFS_FS
+YAFFS_YAFFS1
+YAFFS_YAFFS2
+
+
+1.2 Required disabled config options
+------------------------------------
+CONFIG_YAFFS_DISABLE_LAZY_LOAD
+DNOTIFY
+
+
+1.3 Recommended enabled config options
+------------------------------
+ANDROID_PMEM
+ANDROID_RAM_CONSOLE
+ANDROID_RAM_CONSOLE_ERROR_CORRECTION
+SCHEDSTATS
+DEBUG_PREEMPT
+DEBUG_MUTEXES
+DEBUG_SPINLOCK_SLEEP
+DEBUG_INFO
+FRAME_POINTER
+CPU_FREQ
+CPU_FREQ_TABLE
+CPU_FREQ_DEFAULT_GOV_ONDEMAND
+CPU_FREQ_GOV_ONDEMAND
+CRC_CCITT
+EMBEDDED
+INPUT_TOUCHSCREEN
+I2C
+I2C_BOARDINFO
+LOG_BUF_SHIFT=17
+SERIAL_CORE
+SERIAL_CORE_CONSOLE
+
+
+2. Contact
+==========
+website: http://android.git.kernel.org
+
+mailing-lists: android-kernel@googlegroups.com