This repository has been archived by the owner on Sep 26, 2018. It is now read-only.
"Your phone is not provisioned" #80
Comments
|
"Provisioned" means having a phone number associated with the phone, not
camping. Assuming you've generated a pool of available numbers (with
setup_test_db) you need to send an SMS to 101 to get it assigned to the
phone.
…On Wed, Sep 27, 2017 at 10:48 AM, marvdias ***@***.***> wrote:
I managed to connect sysmoBTS(running the bts soft) and the CCM client
(running nitb). And I can see the ‘OML Link state: connected’:
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Welcome to the OpenBSC control interface
Copyright (C) 2008-2016 Harald Welte, Holger Freyther
Contributions by Daniel Willmann, Jan Lübbe, Stefan Schmidt
Dieter Spaar, Andreas Eversberg, Sylvain Munaut, Neels Hofmeyr
License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
OpenBSC> show bts
BTS 0 is of nanobts type in band GSM900, has CI 1 LAC 1, BSIC 63 (NCC=7, BCC=7) and 1 TRX
Description: (null)
MS Max power: 12 dBm
Minimum Rx Level for Access: -110 dBm
Cell Reselection Hysteresis: 4 dBm
RACH TX-Integer: 9
RACH Max transmissions: 7
Uplink DTX: not enabled
Downlink DTX: not enabled
Channel Description Attachment: yes
Channel Description BS-PA-MFRMS: 5
Channel Description BS-AG_BLKS-RES: 1
System Information present: 0x0000087e, static: 0x00000000
Early Classmark Sending: forbidden
Unit ID: 1234/0/0, OML Stream ID 0xff
NM State: Oper 'Enabled', Admin 'Unlocked', Avail 'OK'
Site Mgr NM State: Oper 'Enabled', Admin 'unknown 0x0', Avail 'OK'
GPRS NSE: Oper 'Enabled', Admin 'Unlocked', Avail 'OK'
GPRS CELL: Oper 'Enabled', Admin 'Unlocked', Avail 'OK'
GPRS NSVC0: Oper 'Enabled', Admin 'Unlocked', Avail 'OK'
GPRS NSVC1: Oper 'Disabled', Admin 'unknown 0x0', Avail 'Off line'
Paging: 0 pending requests, 50 free slots
OML Link state: connected.
Current Channel Load:
CCCH+SDCCH4: 0% (0/4)
TCH/F: 0% (0/2)
SDCCH8: 0% (0/8)
I can see and connect to the network, send SMS, but I cannot call (vty
openbsc log call_log_OpenBSC_-_CCM.log
<https://github.com/facebookincubator/CommunityCellularManager/files/1338195/call_log_OpenBSC_-_CCM.1.log>).
When I try it, I receive an sms with "Your phone is not provisioned"
written, even with the policy of the network set to 'accept-all' and my
phones in the database with 'authorized 1' ( I had to manually create its
entry on the database even with the 'create-on-demand' active).
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#80>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AA_rnwRpPBOytIqY2tda5jiJPDDy5t9wks5smopRgaJpZM4PmJkB>
.
|
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
I managed to connect sysmoBTS(running the bts soft) and the CCM client (running nitb). And I can see the ‘OML Link state: connected’:
I can see and connect to the network, send SMS, but I cannot call (vty openbsc log call_log_OpenBSC_-_CCM.log). When I try it, I receive an sms with "Your phone is not provisioned" written, even with the policy of the network set to 'accept-all' and my phones in the database with 'authorized 1' ( I had to manually create its entry on the database even with the 'create-on-demand' active).
The text was updated successfully, but these errors were encountered: