remote capture application

what it does

allows to perform packet capture and download of pcap over the network from a remote device using TCPdump as well as perform some general Nmap scans

requirements

• TCPdump and Nmap (serverside)
• Tcl/tk support (clientside)

setup/use:

1. clone this repo to the IOT device of your choosing (that supports python and has tcpdump installed) *note this was originally designed and tested on a raspberry pi 4.
2. cd into the "server" directory and add your client computer's IP address to the allow list (allow.txt)
3. run python3 server.py --addr host:port --interface [scan_interface] to make the server start listening and initiate its scan interface -- use '' or \* to run the server on all interfaces
4. go over to your client host and clone the repo there too (if you havent already).
5. from there, cd into the client directory and run python3 client.py --addr [host]:[port] --cmd [CMD] [options...] where [host] and [port] are that of the server, and [CMD] is the command you wish to run, and [options...] are the required (or optional) flags whose requirement vary depending on what is provided as [CMD]. see -h for usage.