[How to] Connect with the new procedure

[flobz]

If you use home assistant follow this guide: #779 (comment) otherwise follow this:

1. When you are connected and see 'LOGIN SUCCESSFUL'
2. Open your browser's DevTools by pressing F12 and then the click on the 'Network' tab
3. Hit the final 'OK' button, under 'LOGIN SUCCESSFUL'
4. You should see a line like this
   Screenshot :
   
   or
   
   or
5. Click on the line
6. In the field "Location" in "Response Header" you should see :
   xxxx://oauth2redirect/<country_code?code=<copy this part>&scope=openid...
   For exemple:
   mymap://oauth2redirect/fr?code=this-is-the-code&scope=openid...
7. Copy the code in the form (eg: this-is-the-code)
8. Click on submit
   If you have trouble try to retry or restart PSACC.

[Joostkpr]

I have copied the code. Where do i paste the code?

[p4block]

Getting 400 - invalid_grant : The provided access grant is invalid, expired, or revoked. a few times trying this. Maybe because the opel page eventually logs in and "uses" the token before psacc can?

[MrStanda]

I encountered the same issue but still without resolution :/

[p4block]

You're supposed to enter the PSA login page with PSACC's URL, which is percent-encoded in the address bar or in the container's logs. It would solve a lot of trouble for people if it opened in newtab.

[malbertone]

Hi,
can see most of the issues related to the new access mode have been fixed in build 3.4.1 released a few minutes ago, do you know when this code will be avaialble as an official update for HA in: https://github.com/flobz/psacc-ha >
Thanks
Mike

[flobz]

It's available on ha now

[lanieuwe]

Hi, I can confirm. It is working in home assistant. I Set up al sensors. And they response. But not always. Often i became a message: Timeout while waiting for response from the server. The sensors became than not available. Is there an option or solution therefore?

[malbertone]

Had the same issue, in order to get the code you should still get the URL from the console (if you can attach to the psa container) and once you paste it in another browser you can get the login page, where after submitting your credentials and clicking on Ok you will get the code in a response from the PSA server when having the developers' tool on.
After that you can proceed with OTP request to finalize the access

[p4block]

You're right. I had to use the URL psacc uses (for some reason it doesn't open it in new tab or something) I also had to use a URL percent decoder to get the actual URL. I managed to login now, took a while after the OTP step

Now getting a lot of this error despite logging in successfully

2024-02-26 22:06:46,332 :: ERROR :: remote_refresh_token isn't defined
2024-02-26 22:06:47,055 :: ERROR :: Error during activation: {'err': 'NOK:FORBIDDEN'}
2024-02-26 22:06:47,568 :: ERROR :: Can't refresh remote token 'access_token'
Traceback (most recent call last):
  File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/psa/RemoteClient.py", line 174, in _refresh_remote_token
    self._get_remote_access_token(otp_code)
  File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/psa/RemoteClient.py", line 206, in _get_remote_access_token
    self.remoteCredentials.access_token = data["access_token"]
KeyError: 'access_token'

Did OTP setup again and works. Oh how much I've missed you psacc

[Str00pwafel]

I'm not sure why but I don't get a valid link it seems.

step 1 is missing and the console shows this:

2024-02-26 19:52:47,729 :: INFO :: 10.1.0.171 - - [26/Feb/2024 19:52:47] "POST /_dash-update-component HTTP/1.1" 200 -
2024-02-26 19:52:55,738 :: INFO :: 10.1.0.171 - - [26/Feb/2024 19:52:55] "GET /config_connect?url=https%3A//idpcvs.peugeot.com/am/oauth2/authorize%3Fclient_id%3D1eebc2d5-5df3-459b-a624-20abfcf82530%26redirect_uri%3Dmymap%253A%252F%252Foauth2redirect%252Fnl%26response_type%3Dcode%26scope%3Dopenid%2520profile%26state%3D-uMs7g_byYLPb5nvJ9xvFQ%26code_challenge%3DWpuo3FMAYQc46iUuCDyeGl5GBg6_xIBegLIPnSYBrrE%26code_challenge_method%3DS256 HTTP/1.1" 200 -
2024-02-26 19:52:55,800 :: INFO :: 10.1.0.171 - - [26/Feb/2024 19:52:55] "GET /_dash-dependencies HTTP/1.1" 200 -
2024-02-26 19:52:55,801 :: INFO :: 10.1.0.171 - - [26/Feb/2024 19:52:55] "GET /_dash-layout HTTP/1.1" 200 -

[Str00pwafel]

I could make the link work, with some effort

[Str00pwafel]

Sadly, I still get the following error. The car is a facelift Peugeot 208 GT, the car model is in the .yml file with a correct regex that matches mine. I don't know what to do.

[juancameijeiras]

I got the same result

[youradds]

How did you make it work? As you said, step 1 is missing - and I'm not sure what URL I'm supposed to go to to get the code? With the modified version last time, it had a debug notice showing the URL to go to (vauxhalls site), but I don't see that this time

[gernot-h]

Seems no-one reported this as issue yet, otherwise I would have commented some days ago already. :-)

I just sent a PR with the fix, see #808.

[290989]

Sorry, but I have trouble to login in HA.
Is it possible with the „how to“ above?

After fill the field with country code & click submit, what is the next step?

[jonnydayy]

Just managed to get mine working again after a couple of days downtime.

Open PSACC, login with username & password. Click submit and then navigate to the second page with the instructions above on. I use HA so navigate to HA logs for PSACC, find the URL that PSACC generated. Remove the % encoding (link for me wouldn't work without it - i used https://www.url-encode-decode.com/.

Navigate to this link, f12, network. The code only appears after logging in and pressing ok, exactly as described above.

[Schalmeier]

That was very helpful. Thanks.

[kroeckx]

So the procedure it's really clear to me. I'm using home assistant. What I try is:

• On the first page enter Opel, email address, password, and BE, press submit
• After about 5 seconds I get: "Success ![ Go to login]"
• I click the go to login button.

I think from there on, something is not clear. There is no way to log in there.

So I try the following:

• open a new tab
• go to https://my.opel.be, and log in there.
• open developer tools, and press the OK button.
• Press the stop logging button, or the the line I need will be removed after a few seconds.

If I copy the code from that into the page, I get: 400 - invalid_grant : The provided access grant is invalid, expired, or revoked.

[jonnydayy]

see above - check PSA logs for the link to login, you don't just navigate to my.opel.be for the code

[jonnydayy]

noticed you are using home assistant - open the addon, in another tab open home assistant, navigate to settings->addons-> PSA CC then logs. When you click 'success go to login' on the addon, the logs will produce a link for you to use (will need to remove %).

This is an excellent overview: #785 (comment)

[kroeckx]

It would be really handy that that URL was just something you can click.

[mikaabra]

What website am I supposed to go to? I have an Peugeot e-208 in Sweden and the MyPeugeot Swedish site only lists app login, not via the web?

[juancameijeiras]

After getting the OK in the user config tab, open the logs (the best way is to have another browser tab with the add-on) and copy the URL that shows in the log (it starts with https://idpcvs.citroen.com/...) Then follow this:

#785 (comment)

[MattCheetham]

The steps confused me but here's it broken down the best I can manage (This is for those of you running Home Assistant OS with this as an Addon).

1. Install the update, run the addon and hit the "Open Web UI" button (Or navigate to it in your sidebar if you have it there)
2. In another tab (for convenience), go open the addon and select "Log" along the top.
3. Go back to the first tab and start the login process (Enter username password, country and hit submit)
4. When the login succeeds, hit the link that appears in the success message to take you to another page (this one has instructions on but seems confusing)
5. Go back to your log tab and hit refresh
6. You'll see a log entry that looks like this "GET /config_connect?url=https://idpcvs.vauxhall.co.uk/am/oauth2/authorize?client_id%3D122f3511-4f74-4a0c-bcda-af2f3b2e3a65%26redirect_uri%3Dmymvxsdk%253A%252F%252Foauth2redirect%252Fgb%26response_type%3Dcode%26scope%3Dopenid%2520profile%26state%3Dxxxxxxxxxxxxxxxxx%26code_challenge%3Dxxxxxxxxxxxxxxxxxxxxxx%26code_challenge_method%3DS256 HTTP/1.1. You want to copy everything after config_connect?url= and before HTTP/1.1. So you end up with something like https://idpcvs.vauxhall.co.uk/am/oauth2/authorize?client_id%3D122f3511-4f74-4a0c-bcda-af2f3b2e3a65%26redirect_uri%3Dmymvxsdk%253A%252F%252Foauth2redirect%252Fgb%26response_type%3Dcode%26scope%3Dopenid%2520profile%26state%3Dxxxxxxxxxxxxxxxxx%26code_challenge%3Dxxxxxxxxxxxxxxxxxxxxxx%26code_challenge_method%3DS256
7. Go to a URL decoder such as this one and paste it in the top box.
8. Copy the result out of the bottom box and open that URL in another tab.
9. Fill out your login details and hit log in
10. You should end up on a page with a red button after successful log in. Right click anywhere on the page and press Inspect to get your network tools open (Or open them via your menus)
11. Go to the Network tab
12. Now click the red button and a load of entries should fill the network tab. For me the very last one was https://idpcvs.vauxhall.co.uk/am/oauth2/authorize. I clicked on that and made sure I was set to "headers" and looked down the data until I saw "Location". That should have an entry in it that looks something like mymvxsdk://oauth2redirect/gb?code=xxxxxxxxxxxxxxxxxxx&scope=openid%20profile&state=xxxxxxxxxxxxxxxxxxxx.
13. Copy the bit after code= and before &scope. So just the actual code in the code part.
14. Switch back to your addon tab and paste the code in the box as requested and hit submit
15. You should get a message prompting you to go finish the OTP flow, which should be familiar to you by now.

Hope this helps some of the less technically minded people. I'm not sure if there was a simpler way but this was the flow that worked for me running this addon in Home Assistant OS on a Raspberry Pi.

[Blackmannl]

Thank you very much! Succes!

[Vantage-DS]

Thank you for this. Very helpful!

[gernot-h]

Just contributed a fix in #808, let's hope @flobz can review and probably merge it soon. :-)

[srmeuwese]

This helped me so much! Had to switch to Mozilla in the end to get the bits I needed. Just haven't seen my entities updated yet. Did do a reboot of HA. Does that need time to sync or could you force it to sync somewhere?

[skyflm]

Your procedure worked for me too. Thank you, man!

[dbara]

Hi, I'm always running into "Invalid code length".
The URL also seems to be different:

GET | http://***:5000/config_connect?url=https://idpcvs.driveds.com/am/oauth2/authorize?client_id=***-***-***-***-***&redirect_uri=mymdssdk%3A%2F%2Foauth2redirect%2Fde&response_type=code&scope=openid%20profile&state=***-***&code_challenge=***&code_challenge_method=S256

[sven0110]

I've the same problem, there is no code in the URL:

http://:5000/config_connect?url=https%3A//idpcvs.peugeot.com/am/oauth2/authorize%3Fclient_id%%26redirect_uri%3Dmymap%253A%252F%252Foauth2redirect%252Fde%26response_type%3Dcode%26scope%3Dopenid%2520profile%26state%3D***%26code_challenge%3D***%26code_challenge_method%3DS256

[youradds]

That isn't the code you want.

1. Get the URL - iehttps%3A//idpcvs.peugeot.com/am/oauth2/authorize%3Fclient_id%%26redirect_uri%3Dmymap%253A%252F%252Foauth2redirect%252Fde%26response_type%3Dcode%26scope%3Dopenid%2520profile%26state%3D***%26code_challenge%3D***%26code_challenge_method%3DS256 - then "decode" that in a site like: https://meyerweb.com/eric/tools/dencoder/ , which wil give you the URL to use in your browser
2. Log in on that page
3. You get the success page
4. now this is the bit it took me a while on - you NOW open up developer tools and look at "Network". Press the button on the page, and you should now see the "authorize" network tag, which will have the code=xxxx value

Hope that helps!

[sven0110]

@youradds : You made my day 👍🏼 It works. Thanks!!

[sven0110]

After the first joy and a few minutes later i get Error 300. Restart Container doesn‘t change anything:

2024-02-29 12:19:52,198 :: WARNING :: Can't get language
2024-02-29 12:19:54,078 :: INFO :: update_data
2024-02-29 12:19:55,607 :: INFO :: * Running on http://0.0.0.0:5000/ (Press CTRL+C to quit)
2024-02-29 12:19:56,318 :: INFO :: mqtt msg received: psa/RemoteServices/to/cid/AP-/VehCharge/state/ProcessManagement b'{"process_date":"2024-02-29T12:19:52Z","vin":"","correlation_id":"","process_code":"901","process_message":"[process.901.vehicle.asleep.key]"}'
2024-02-29 12:20:41,307 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:41] "GET / HTTP/1.1" 200 -
2024-02-29 12:20:41,403 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:41] "GET /assets/99_custom_overides.css?m=1708954266.0 HTTP/1.1" 200 -
2024-02-29 12:20:41,407 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:41] "GET /assets/clientside.js?m=1708954266.0 HTTP/1.1" 200 -
2024-02-29 12:20:41,992 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:41] "GET /_dash-layout HTTP/1.1" 200 -
2024-02-29 12:20:41,994 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:41] "GET /_dash-dependencies HTTP/1.1" 200 -
2024-02-29 12:20:42,050 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "POST /_dash-update-component HTTP/1.1" 200 -
2024-02-29 12:20:42,104 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /assets/images/settings.svg HTTP/1.1" 200 -
2024-02-29 12:20:42,107 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /assets/images/consumption.svg HTTP/1.1" 200 -
2024-02-29 12:20:42,111 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /assets/images/pollution.svg HTTP/1.1" 200 -
2024-02-29 12:20:42,114 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /assets/images/battery-charge-line.svg HTTP/1.1" 200 -
2024-02-29 12:20:42,118 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /assets/images/electricity%20bill.svg HTTP/1.1" 200 -
2024-02-29 12:20:42,127 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /control?header=false HTTP/1.1" 200 -
2024-02-29 12:20:42,229 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /_dash-layout HTTP/1.1" 200 -
2024-02-29 12:20:42,232 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "GET /_dash-dependencies HTTP/1.1" 200 -
2024-02-29 12:20:42,300 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:42] "POST /_dash-update-component HTTP/1.1" 200 -
2024-02-29 12:20:45,971 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:45] "GET /assets/images/mileage.svg HTTP/1.1" 200 -
2024-02-29 12:20:45,974 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:45] "GET /assets/images/sync.svg HTTP/1.1" 200 -
2024-02-29 12:20:45,977 :: INFO :: 192.168.2.221 - - [29/Feb/2024 12:20:45] "GET /assets/images/battery-charge.svg HTTP/1.1" 200 -
2024-02-29 12:21:21,769 :: INFO :: mqtt msg received: psa/RemoteServices/to/cid/AP-/VehCharge/state b'{"resp_date":"2024-02-29T12:21:06Z","vin":"","correlation_id":"","return_code":"300"}'
2024-02-29 12:21:21,769 :: ERROR :: 300 : ?
Containerised psa_car_controller loading...
2024-02-29 12:50:44,499 :: INFO :: App version 3.4.1

[bacardiiii]

I keep getting Identifiant ou mot de passe invalide (invalid user and password) when trying to login into the Peugeot webpage (even though im using the same login details ive just used to login on home assistant.

[Glexu]

I had the same thing, after several attempts it blocked my account. today I changed the password to mypeugeot account, and the whole procedure went through without a problem.

[Apollon77]

were your original passwords maybe >16 characters? They changed their systems ... only 16 chars allowed (and some other rules) ... but they also apply that for logins .........

[bacardiiii]

Do you just change it on the app?

[youradds]

just do a "lost password" on their website, and it should let you create a new one

[bacardiiii]

Thanks i got it working after changing the password

[colas-sebastien]

I did a lot of tries and I am still not able to find the code.
The best I found is into the screenshot. The code is too long assert len(code) == 36, "Invalid code length"

[youradds]

Thats the mistake I made. Its not actually on that page. Clear that history, and then press "OK". The URL with the code=xxxx value is on the last page (not the one right after logging in). I spent a good hour looking through those logs - then finally worked this out!

[colas-sebastien]

Thank you @youradds you saved my life !!!
I am able to connect now, I am waiting for data now

[lanieuwe]

The entire procedure was successful. Nice work! Just not the last part. "Enter your PIN code. The current myPeugeot app on my phone does not ask for a PIN code either. This used to be the case. The PIN code box on the form in the home assistant is left empty later also does not give the desired result. (Country: NL) The app only asks for login email and password. App version is v.1.44.2
How to solve this?

[lanieuwe]

do you have to enter a PIN code in the original PSA app? I should have entered this once, but I am never offered it when I register again. This is because PIN is necessary in the workaround. For me he doesn't take the PIN. So I can't get any further.

[mikaabra]

Weird. I have to frequently enter the pin in the Peugeot app, and this same pin worked with the new procedure in psa_car_controller.

[lanieuwe]

It is working now.
But not always. Often I get a message in home assistant: "Timeout while waiting for response from the server".
Why is that?

[PaddyRu]

I just went through the procedure with success except for the OTP as the log says:

2024-02-29 21:16:07,898 :: ERROR :: remote_refresh_token isn't defined
2024-02-29 21:16:08,551 :: ERROR :: Can't refresh remote token 'access_token'
Traceback (most recent call last):
File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/psa/RemoteClient.py", line 174, in _refresh_remote_token
self._get_remote_access_token(otp_code)
File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/psa/RemoteClient.py", line 206, in _get_remote_access_token
self.remoteCredentials.access_token = data["access_token"]
KeyError: 'access_token'
2024-02-29 21:16:09,659 :: INFO :: save config change

[PaddyRu]

After the last update I did a simple OTP again and checked the logs, no more error.
I then checked the config.json file in the container and the refresh token was indeed filled, seems like this solved it for me.
Thank you to the maintainers of the project, good job.

[diver77]

Today I get this warnings:
Wallbox Mokka: vehicle soc: Get "http://192.168.xxx/get_vehicleinfo/xxx?from_cache=1\": dial tcp 192.168.xxx:80: connect: connection refused

Wallbox Mokka: vehicle odometer: Get "http://192.168.xxx/get_vehicleinfo/xxx?from_cache=1\": dial tcp 192.168.:80: connect: connection refused

does anybody know what I’m doing wrong with my installation

[PaddyRu]

Is 80 the correct port for your PSA installation ?

[diver77]

You are right my psa it‘son port 5000.
were can I change it. I never have stand port 80 in my evcc.yaml ?

[alexan-d]

you have to add the correct port after the ip. if you don't have changed the standard port 5000 you have to use somthing like that:
http://192.168.xxx:5000/get_vehicleinfo/xxx?from_cache=1

[Ingo62]

Can't find the code. Please help.

[severine24700]

Hello, I'm new to Home assistant. I had managed to install the first version of psacc but since the update where I have to look for the code, I'm bored. You said to go to the development keys in the "network" tab, but I can't find that tab... No matter how hard I look in my home assistant, I can only find the classic tabs as in the attached file. Have you installed an additional module to access it? Sorry for this silly question, but I've been at it for several hours and I can't find my answer on the web... If some kind soul could please explain... I get to the Peugeot page with the decoder but I don't get the page with the red button... Thank you for your help.

Translated with DeepL.com (free version)

[PaddyRu]

Hi Severine,
It is not a part of Home Assistant you should be looking for here, but a feature of your Browser called "Developer Tools" (usually you can also display these using F12 on your keyboard)

[severine24700]

Thank you so much, I finally found it! The 1st code was wrong... Who knows why... I pressed "ok" again and there new code and it works!!! Yeah!!! Thanks again for the developers and people who take the time to help us when we're not computer experts...

[severine24700]

[Easyrunner]

@MattCheetham

Thank you for your instaructions, but I can`t see any code.

After 9 Fill out your login details and hit log in
it works

But after 10 You should end up on a page with a red button after successful log in. Right click anywhere on the page and press Inspect to get your network tools open (Or open them via your menus)
I'm getting a successfull Login, but what kind of red button do you mean?

Maybe at Peugeot it is different.
Anyway, I see a lot of traffic, but nowhere this "xxxcode=xxxxxxx"

[Easyrunner]

Now I see following:

mymap://oauth2redirect/de?code=89315a69-xxxx-4e85-bd22-98ec845c8229&scope=openid%20profile&state=7h_Zk1UFshmtxK0tzLI3Lw

When I use the Code between Code= xxxx %scope I'm getting following:

400 - invalid_grant : The provided access grant is invalid, expired, or revoked.

[ronron261]

I get the same, the url is a bit different. Perhaps by country??
https://mybe.opel.com/be/nl/login?code=c5d98dac-xxxx-xxxx-ba98-f8ae06c5effe&scope=openid%20profile%20email&state=

[ndivens]

I get this message unfortunately. The car is a new Opel astra sports tourer hybrid.

[patrickvorgers]

I am also getting the same message on my Peugeot 208 e

[KETCdesign]

Hi I am so close to getting this sorted but failing at the last hurdle.
I get the sms code and put the pin code in. It then returns an error {'err': 'NOK:SN'}
Anyone know what this suggests or what my next move is?

[KETCdesign]

[youradds]

Are you sure the pin is correct? Mine is only 4 digits long (this is the PIN number you enter in the app, not the OTP code sent via SMS)

[lanieuwe]

Thanks everyone all works now for me!

I hope there is also quick a solution for "Honk the horn" and "close the doors" :)

[dandek01]

I have peugeot 308 sw 2015 and all I get is this

No vehicle in your account is compatible with this API, you vehicle is probably too old...

I don't know is this an error or my vehicle is really too old. I have pug app that is working with it.

[Digitalvitamin]

On the "Connection to PSA" page I cklick on the "[1. Click here]" link
The link leads to: https://idpcvs.peugeot.com/am/oauth2/authorize?client_id=1eebc2d5-5df3-459b-a624-...&redirect_uri=mymap%3A%2F%2Foauth2redirect%2Fde&response_type=code&scope=openid%20profile&state=Sd0s...&code_challenge=isMX4q...&code_challenge_method=S256

All I see is an empty page. There is no "LOGIN SUCCESSFUL" and no ok button. I tried with cache disabled and in a private browser window as well. In the browser network analysis I can see among others:

• HTTP 401 on POST to https://idpcvs.peugeot.com/am/json/users?_action=idFromSession&realm=/clientsB2CPeugeot
• HTTP 404 on POST to https://idpcvs.peugeot.com/am/XUI/templates/openam/authn/OAuth2.html?v=18.4.0

Did they change anything again?
(using Peugeot and country code DE for Germany)

[andyvee69]

Following the above and when submitting the code get the below error message:

HTTPSConnectionPool(host='idpcvs.peugeot.com', port=443): Max retries exceeded with url: /am/oauth2/access_token (Caused by NewConnectionError('<urllib3.connection.HTTPSConnection object at 0x7f46bb7150d0>: Failed to establish a new connection: [Errno -5] No address associated with hostname'))

[colas-sebastien]

Hi,
It seems I failed the last step of registration "Enter your PIN code"

2024-03-12 18:57:55,528 :: ERROR :: remote_refresh_token isn't defined
2024-03-12 18:57:55,894 :: ERROR :: Error during activation: {'err': 'NOK:FORBIDDEN'}
2024-03-12 18:57:56,263 :: ERROR :: Can't refresh remote token 'access_token'

Any idea of how to get or change it ?

[colas-sebastien]

With this configuration I can get charge information but nothing related to trips

[nosuchuser]

You can try and follow the procedure described in this comment: #714 (comment)

many have tried it and trips started to appear.

[gernot-h]

You can try and follow the procedure described in this comment: #714 (comment)

many have tried it and trips started to appear.

For me, just waiting a few days did the same, out of nowhere suddenly the Stellantis backend severs started providing missing data like SoH in my case. So I wonder how many of those who reported this procedure has fixed things just would have seen the same if they would have done just nothing. :-)

[jove01]

Hi
Some weeks aga I had installelled 3.4.1 (?) aas AddOn in HA. All works fine. Later I didn't install 3.5.0 and stopped any Updates.

Suddenly PSACC stopped working with comment to install 3.5.1. Id did not install and wait a few days to see to see, if there is a new update.

Now I tried to update. After Update and restart HA an waiting, PSACC ssems to work: the Symbolis green! After open the WebUI I see a Popup "The AddOn is not running ... start". After that I get the message "502 Bad gateway" and the Log shows

`Containerised psa_car_controller loading...
2024-04-01 11:53:00,543 :: INFO :: App version 3.5.0
2024-04-01 11:53:00,874 :: ERROR :: Connection need to be updated, Please redo authentication process.
Traceback (most recent call last):
  File "/usr/local/bin/psa-car-controller", line 8, in <module>
    sys.exit(main())
  File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/__main__.py", line 20, in main
    app.load_app()
  File "/usr/local/lib/python3.9/dist-packages/psa_car_controller/psacc/application/car_controller.py", line 118, in load_app
    raise ConnectionError
ConnectionError
2024-04-01 11:53:00,877 :: INFO :: save config change`

I did not found a answer for this .

[mdkeil]

evcc-io/evcc#13612

evcc-dev-team tries to fully automate the token-generation/refresh