System API field too small for value

[b-morgan]

Lulzbot Cura 2 beta has the ability to connect to OctoPrint but requires an API key. When I go to OctoPrint settings, API the key is shown, but the field is too small. When I mouseover the field, I get a "red circle with diagonal line" cursor. This appears to be independent of browser as I tried Chrome, Firefox, and Edge.

[GitIssueBot]

Hi @b-morgan,

It looks like there is some information missing from your bug report that will be needed in order to solve the problem. Read the Contribution Guidelines which will provide you with a template to fill out here so that your bug report is ready to be investigated (I promise I'll go away then too!).

If you did not intend to report a bug but wanted to request a feature or brain storm about some kind of development, please take special note of the title format to use as described in the Contribution Guidelines.

Please do not abuse the bug tracker as a support forum - if you have a question or otherwise need some kind of help or support refer to the Mailinglist or the G+ Community instead of here.

Also make sure you are at the right place - this is the bug tracker of the official version of OctoPrint, not the Raspberry Pi image OctoPi nor any unbundled third party OctoPrint plugins or unofficial versions. Make sure too that you have read through the Frequently Asked Questions and searched the existing tickets for your problem - try multiple search terms please.

I'm marking this one now as needing some more information. Please understand that if you do not provide that information within the next two weeks (until 2017-08-18 14:00 UTC) I'll close this ticket so it doesn't clutter the bug tracker. This is nothing personal, so please just be considerate and help the maintainers solve this problem quickly by following the guidelines linked above. Remember, the less time the devs have to spend running after information on tickets, the more time they have to actually solve problems and add awesome new features. Thank you!

Best regards,
~ Your friendly GitIssueBot

PS: I'm just an automated script, not a human being, so don't expect any replies from me :) Your ticket is read by humans too, I'm just not one of them.

[b-morgan]

What were you doing?

Lulzbot Cura 2 beta has the ability to connect to OctoPrint but requires an API key. When I go to OctoPrint settings, API the key is shown, but the field is too small. When I mouseover the field, I get a "red circle with diagonal line" cursor. This appears to be independent of browser as I tried Chrome, Firefox, and Edge.#### What did you expect to happen?

What happened instead?

Did the same happen when running OctoPrint in safe mode?

[Try to reproduce your problem in safe mode. You can find information
on how to enable safe mode in the Contribution Guidelines.]

Branch & Commit or Version of OctoPrint

1.3.4

Operating System running OctoPrint

OctoPi, version 0.14.0

Printer model & used firmware incl. version

Lulzbot TAZ 6, RAMBo 1.3L, Marlin 1.0.2.22

Browser and Version of Browser, Operating System running Browser

Windows 10 Professional, Chrome 60.0.3112.90 (Official Build) (64-bit), Firefox 54.0.1 (64-bit)

Link to octoprint.log

octoprint.zip

Link to contents of terminal tab or serial.log

[On gist.github.com or pastebin.com. If applicable, always include if unsure or
reporting communication issues. Never truncate.

Link to contents of Javascript console in the browser

Screenshot(s)/video(s) showing the problem:

Yes, I have read the FAQ.

[KC703]

Start the mouse above the API Key box and drag down... the API key should be highlighted for cut and paste...

…

On Fri, Aug 4, 2017 at 10:21 AM, b-morgan ***@***.***> wrote: What were you doing? Lulzbot Cura 2 beta has the ability to connect to OctoPrint but requires an API key. When I go to OctoPrint settings, API the key is shown, but the field is too small. When I mouseover the field, I get a "red circle with diagonal line" cursor. This appears to be independent of browser as I tried Chrome, Firefox, and Edge.#### What did you expect to happen? What happened instead? Did the same happen when running OctoPrint in safe mode? [Try to reproduce your problem in safe mode. You can find information on how to enable safe mode in the Contribution Guidelines.] Branch & Commit or Version of OctoPrint 1.3.4 Operating System running OctoPrint OctoPi, version 0.14.0 Printer model & used firmware incl. version Lulzbot TAZ 6, RAMBo 1.3L, Marlin 1.0.2.22 Browser and Version of Browser, Operating System running Browser Windows 10 Professional, Chrome 60.0.3112.90 (Official Build) (64-bit), Firefox 54.0.1 (64-bit) Link to octoprint.log octoprint.zip <https://github.com/foosel/OctoPrint/files/1200672/octoprint.zip> Link to contents of terminal tab or serial.log [On gist.github.com or pastebin.com. If applicable, always include if unsure or reporting communication issues. Never truncate. Link to contents of Javascript console in the browser Screenshot(s)/video(s) showing the problem: [image: image] <https://user-images.githubusercontent.com/1547854/28972717-ead54f32-78ed-11e7-953d-d8ad7b94a964.png> Yes, I have read the FAQ. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#2055 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AHXrAovSM4bfrLOffLngIxqmAvg3WRFPks5sUykAgaJpZM4Otv8Z> .

[foosel]

I've increased the size of the field and added a little "copy" button (see also #2056).

Already on maintenance, soon on devel, will be released with 1.3.6.