FPGA-based HyperLogLog Accelerator

Build

Make sure Vivado 2019.1 is in your path = this is an example (your path might be different)

$ source /opt/Xilinx/Vivado/2019.1/settings64.sh

Handling HLS IP cores

1. Setup build directory, e.g. for the hyperloglog module

$ cd hls/hyperloglog
$ mkdir build
$ cd build
$ cmake .. -DFPGA_PART=xcvu9p-flga2104-2L-e 

2. Run c-simulation

$ make csim

3. Run c-synthesis

$ make synthesis

4. Generate HLS IP core

$ make ip

5. Install HLS IP core in ip repository

$ make installip

After 'make installip' command the ip of the module could be found in ../iprepo

Contributors

• Amit Kulkarni amit.kulkarni@ieee.org
• Monica Chiosa monica.chiosa@inf.ethz.ch
• Thomas B. Preußer tpreusser@inf.ethz.ch
• Kaan Kara kaan.kara@outlook.com
• David Sidler david.sidler@microsoft.com
• Gustavo Alonso alonso@inf.ethz.ch

Publication(s)

• A. Kulkarni, M.Chiosa, T.B.Preußer, K.Kara, D. Sidler, G. Alonso, HyperLogLog Sketch Accleration on FPGA, in FPL'20.

Citation

If you use the HyperLogLog Accelerator in your project please cite the following paper and/or link to the github project:

@INPROCEEDINGS{hll2020,
    author={A. Kulkarni and M. Chiosa and T. B. Preu{\ss}er and K. Kara and D. Sidler and G. Alonso}, 
    booktitle={FPL},
    year={2020}, 
    title={{HyperLogLog Sketch Acceleration on FPGA}}, 
}