uart.rst

UART

.. py:module:: microbit.uart

The uart module lets you talk to a device connected to your board using a serial interface.

Functions

.. method:: init(baudrate=9600, bits=8, parity=None, stop=1, \*, tx=None, rx=None)

    Initialize serial communication with the specified parameters on the
    specified ``tx`` and ``rx`` pins. Note that for correct communication, the parameters
    have to be the same on both communicating devices.

    .. warning::

        Initializing the UART on external pins will cause the Python console on
        USB to become unaccessible, as it uses the same hardware. To bring the
        console back you must reinitialize the UART without passing anything for
        ``tx'' or ``rx'' (or passing ``None'' to these arguments).  This means
        that calling ``uart.init(115200)'' is enough to restore the Python console.

    The ``baudrate`` defines the speed of communication. Common baud
    rates include:

        * 9600
        * 14400
        * 19200
        * 28800
        * 38400
        * 57600
        * 115200

    The ``bits`` defines the size of bytes being transmitted, and the board
    only supports 8. The ``parity`` parameter defines how parity is checked,
    and it can be ``None``, ``microbit.uart.ODD`` or ``microbit.uart.EVEN``.
    The ``stop`` parameter tells the number of stop bits, and has to be 1 for
    this board.

    If ``tx`` and ``rx`` are not specified then the internal USB-UART TX/RX pins
    are used which connect to the USB serial convertor on the micro:bit, thus
    connecting the UART to your PC.  You can specify any other pins you want by
    passing the desired pin objects to the ``tx`` and ``rx`` parameters.

    .. note::

        When connecting the device, make sure you "cross" the wires -- the TX
        pin on your board needs to be connected with the RX pin on the device,
        and the RX pin -- with the TX pin on the device. Also make sure the
        ground pins of both devices are connected.

.. method:: uart.any()

   Return ``True`` if any characters waiting, else ``False``.

.. method:: uart.read([nbytes])

   Read characters.  If ``nbytes`` is specified then read at most that many
   bytes.

.. method:: uart.readall()

   Read as much data as possible.

   Return value: a bytes object or ``None`` on timeout.

.. method:: uart.readinto(buf[, nbytes])

   Read bytes into the ``buf``.  If ``nbytes`` is specified then read at most
   that many bytes.  Otherwise, read at most ``len(buf)`` bytes.

   Return value: number of bytes read and stored into ``buf`` or ``None`` on
   timeout.

.. method:: uart.readline()

   Read a line, ending in a newline character.

   Return value: the line read or ``None`` on timeout. The newline character is
   included in the returned bytes.

.. method:: uart.write(buf)

   Write the buffer of bytes to the bus.

   Return value: number of bytes written or ``None`` on timeout.