Merge tag 'v5.15.153' into 5.15-main

Linux 5.15.153

# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAmYDTp4ACgkQ3qZv95d3
# LNytng/+LA5JjTwpYPtEJVEdEo2RIAZHC8BXmgSVclP7nskYDQL+P70G3FdDvJQT
# DS90xLpuyrJsYVbro9dhJ7+nkc5c62043t46fZdOfSh4jqq1oj7TQ8HLLqnOzaqu
# 5/C5YSDDxqoiUsG8IgUg9qlBQATpKlD2/gEY7Vl6JL1xsatviCX5Slnrlm2MC6rZ
# Ojv3ROKOk9OHfdwRi9RYUvH+Q05Wh/bkv4ZGJwhlGb3YbuKeYHqiS1Bpvo9BVpG7
# 7kZPOFhhcJ2RZ2zdcCpwTMWgiTEZV4CtL8to0pHoDs2/wswv8arDMyE+LXr8iQIj
# XYyyLuDParb9lJzr5PgvN8CFlF2EktrycsaT0Jk4ekiUQsdq4bvyKpBkbv1HtPm1
# MpkH58xQf590A7k+wki0WQI8Q4oLmWCbzkdw2LIbojISa5Tza9ivq6pcMBaugRTY
# DXpphQuw9ScT35yrXdaPLnjc/PpNIjxqCcSvcewfOggfaU13kghfmaANiBvjLSJs
# R91tHo26P3I1li3YvI4dc5rq8AIJhFwvcqsQ6Uv7pkc1pR6H1viIBJMb68swRFL4
# 4imFR5gCLuoks8lIVcDLNNebnbmzu7Fhdh42asQMRajSDY/TqlSO7g+QiAd/nK/x
# GVV+RFxAvadYO2yQqdpKL68EOnhSl/b+t0T2EpKsPDSdEATsFdo=
# =KytE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue Mar 26 23:39:26 2024 CET
# gpg:                using RSA key E27E5D8A3403A2EF66873BBCDEA66FF797772CDC
# gpg: Can't check signature: No public key

Documentation/admin-guide/kernel-parameters.txt

@@ -1084,8 +1084,12 @@
 	nopku		[X86] Disable Memory Protection Keys CPU feature found
 			in some Intel CPUs.
 
-	<module>.async_probe [KNL]
-			Enable asynchronous probe on this module.
+	<module>.async_probe[=<bool>] [KNL]
+			If no <bool> value is specified or if the value
+			specified is not a valid <bool>, enable asynchronous
+			probe on this module.  Otherwise, enable/disable
+			asynchronous probe on this module as indicated by the
+			<bool> value. See also: module.async_probe
 
 	early_ioremap_debug [KNL]
 			Enable debug messages in early_ioremap support. This
@@ -3137,6 +3141,15 @@
 			For details see:
 			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
 
+	module.async_probe=<bool>
+			[KNL] When set to true, modules will use async probing
+			by default. To enable/disable async probing for a
+			specific module, use the module specific control that
+			is documented under <module>.async_probe. When both
+			module.async_probe and <module>.async_probe are
+			specified, <module>.async_probe takes precedence for
+			the specific module.
+
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 15
-SUBLEVEL = 152
+SUBLEVEL = 153
 EXTRAVERSION =
 NAME = Trick or Treat
 

arch/arm/boot/dts/arm-realview-pb1176.dts

@@ -435,7 +435,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -105,8 +105,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -119,17 +117,10 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -150,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };

arch/arm/crypto/sha256_glue.c

@@ -24,32 +24,29 @@
 
 #include "sha256_glue.h"
 
-asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
-					unsigned int num_blks);
+asmlinkage void sha256_block_data_order(struct sha256_state *state,
+					const u8 *data, int num_blks);
 
 int crypto_sha256_arm_update(struct shash_desc *desc, const u8 *data,
 			     unsigned int len)
 {
 	/* make sure casting to sha256_block_fn() is safe */
 	BUILD_BUG_ON(offsetof(struct sha256_state, state) != 0);
 
-	return sha256_base_do_update(desc, data, len,
-				(sha256_block_fn *)sha256_block_data_order);
+	return sha256_base_do_update(desc, data, len, sha256_block_data_order);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_update);
 
 static int crypto_sha256_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha256_base_do_finalize(desc,
-				(sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_finalize(desc, sha256_block_data_order);
 	return sha256_base_finish(desc, out);
 }
 
 int crypto_sha256_arm_finup(struct shash_desc *desc, const u8 *data,
 			    unsigned int len, u8 *out)
 {
-	sha256_base_do_update(desc, data, len,
-			      (sha256_block_fn *)sha256_block_data_order);
+	sha256_base_do_update(desc, data, len, sha256_block_data_order);
 	return crypto_sha256_arm_final(desc, out);
 }
 EXPORT_SYMBOL(crypto_sha256_arm_finup);

arch/arm/crypto/sha512-glue.c

@@ -25,27 +25,25 @@ MODULE_ALIAS_CRYPTO("sha512");
 MODULE_ALIAS_CRYPTO("sha384-arm");
 MODULE_ALIAS_CRYPTO("sha512-arm");
 
-asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks);
+asmlinkage void sha512_block_data_order(struct sha512_state *state,
+					u8 const *src, int blocks);
 
 int sha512_arm_update(struct shash_desc *desc, const u8 *data,
 		      unsigned int len)
 {
-	return sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	return sha512_base_do_update(desc, data, len, sha512_block_data_order);
 }
 
 static int sha512_arm_final(struct shash_desc *desc, u8 *out)
 {
-	sha512_base_do_finalize(desc,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_finalize(desc, sha512_block_data_order);
 	return sha512_base_finish(desc, out);
 }
 
 int sha512_arm_finup(struct shash_desc *desc, const u8 *data,
 		     unsigned int len, u8 *out)
 {
-	sha512_base_do_update(desc, data, len,
-		(sha512_block_fn *)sha512_block_data_order);
+	sha512_base_do_update(desc, data, len, sha512_block_data_order);
 	return sha512_arm_final(desc, out);
 }
 

arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi

@@ -180,9 +180,6 @@
 				brcm,num-gphy = <5>;
 				brcm,num-rgmii-ports = <2>;
 
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				ports: ports {
 					#address-cells = <1>;
 					#size-cells = <0>;

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts

@@ -191,8 +191,10 @@
 };
 
 &usdhc2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	vmmc-supply = <&reg_vdd_3v3>;
 	vqmmc-supply = <&reg_nvcc_sd>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
@@ -275,8 +277,8 @@
 
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000083
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000083
 		>;
 	};
 
@@ -288,19 +290,19 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x0
 		>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
-			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
-			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
 		>;
 	};
 
@@ -312,13 +314,40 @@
 
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x90
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
 			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
 			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
 			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
 			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
-			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x94
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x96
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xd0
 		>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi

@@ -220,8 +220,8 @@
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
-			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000083
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000083
 		>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi

@@ -40,17 +40,6 @@
 		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_usb1_en>;
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
 };
 
 /* off-board header */
@@ -102,9 +91,10 @@
 };
 
 &usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
 	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
@@ -156,14 +146,6 @@
 		>;
 	};
 
-	pinctrl_reg_usb1_en: regusb1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
-			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
-		>;
-	};
-
 	pinctrl_spi2: spi2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
@@ -186,4 +168,11 @@
 			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
 		>;
 	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
 };

arch/arm64/boot/dts/marvell/armada-37xx.dtsi

@@ -414,14 +414,14 @@
 			crypto: crypto@90000 {
 				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "mem", "ring0", "ring1",
-						  "ring2", "ring3", "eip";
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "ring0", "ring1", "ring2",
+						  "ring3", "eip", "mem";
 				clocks = <&nb_periph_clk 15>;
 			};
 

arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

@@ -506,14 +506,14 @@
 		CP11X_LABEL(crypto): crypto@800000 {
 			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <88 IRQ_TYPE_LEVEL_HIGH>,
 				<89 IRQ_TYPE_LEVEL_HIGH>,
 				<90 IRQ_TYPE_LEVEL_HIGH>,
 				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
+				<92 IRQ_TYPE_LEVEL_HIGH>,
+				<87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3",
+					  "eip", "mem";
 			clock-names = "core", "reg";
 			clocks = <&CP11X_LABEL(clk) 1 26>,
 				 <&CP11X_LABEL(clk) 1 17>;

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

@@ -78,6 +78,7 @@
 
 	memory@40000000 {
 		reg = <0 0x40000000 0 0x40000000>;
+		device_type = "memory";
 	};
 
 	reg_1p8v: regulator-1p8v {