il_trafficgen setup is used to measure the sustainable frame rate for a specified number of flows, PPS and packet size. il_trafficgen is used to transmit packets to data-plane which inturn does a packet forwarding to il_trafficgen responder/generator.

il_trafficgen test setup

                 -------------    s1u    -----------                     Aim: For a specified number of flows, PPS and pkt size,
                |    P0-Rx    |----<----|           |<-- -                    compute Uplink(UL) and Downlink(DL) loss
                |    P0-Tx    |---->----| P0        |---> |
                |             |         |           |   | |                   UL loss = P0-Tx - P1-Rx
                |             |         |           |   | |                   DL loss = P1-Tx - P0-Rx
                |il_trafficgen|         |data-plane |   v ^
                |             |         |           |   | |
                |    P1-Rx    |----<----|           |<--  |
                |    P1-Tx    |---->----| P1        |----->
                |             |   sgi   |           |
                 -------------           -----------

il_trafficgen directory structure

1. il_trafficgen: Download "il_trafficgen" under /opt directory from git clone https://@ilpm.intel-research.net/bitbucket/scm/vccbbw/il_trafficgen.git Sample: After "il_trafficgen" is downloaded, directories would be /opt/il_trafficgen/pktgen /opt/il_trafficgen/dpdk

Build il_trafficgen using script

Inside "/opt/il_trafficgen" folder perform below steps to install il_trafficgen: - Execute : ./install.sh - Using install.sh script build pktgen and install it's dependencies.

Build Manualy

1. Build dpdk application as below: 1.1 cd /opt/il_trafficgen/pktgen 1.2 Execute command: "source setenv.sh" 1.3 cd /opt/il_trafficgen/dpdk 1.4 Execute: make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc 1.5 cd x86_64-native-linuxapp-gcc 1.6 make -j 20

2. Build "pktgen" application by executing "make" command in /opt/il_trafficgen/pktgen

Configuration

1. Bind the DPDK ports that are to be used in il_trafficgen to forward or receive packets. Example: To bind port 81:00.0 and 81:00.1, run /opt/il_trafficgen/dpdk/usertools/dpdk-devbind.py -b igb_uio 81:00.0 81:00.1
2. Configure /opt/il_trafficgen/pktgen/autotest/user_input.cfg

/opt/il_trafficgen/pktgen/autotest/user_input.cfg

Configure below parameters:

test_duration --> Test duration (Packets would be forwarded from il_trafficgen to data-plane application for this set duration). If test_duration is set to 0, the packets would be forwarded for infinite time. User will have to manually execute stop commands to stop packet transmission flows --> Number of flows to be tested in the test run ue_ip_range --> Range of unique UE's IPs that needs to be used to create unique flows Example: ue_ip_range = 16.0.0.1 to 16.255.255.100 NOTE: The range should be greater than or equal to the number of 'flows' field no_of_enb --> Number of eNB that have to be used Example: no_of_enb = 80 enb_ip_range --> Range of unique eNB IPs that needs to be used to create unique flows Example: enb_ip_range = 11.7.1.101 to 11.7.1.255 NOTE: The range should be greater than or equal to the number of 'no_of_enb' field app_srvr_ip_range --> Range of unique APP Server IPs that needs to be used to create unique flows Example: app_srvr_ip_range = 13.7.1.110 to 13.7.1.255 NOTE: Current implementation considers only one dst IP for unique flows s1u_sgw_ip --> IP address of s1u interface of data-plane gen_host_ip --> il_trafficgen generator HOST IP address resp_host_ip --> il_trafficgen responder HOST IP address s1u_port --> DPDK port to be used by il_trafficgen generator(s1u) sgi_port --> DPDK port to be used by il_trafficgen responder(sgi) p0_src_mac --> Mac address of port 0 interface of il_trafficgen generator(s1u) p0_dst_mac --> Mac address of port 0 interface of data-plane(s1u) p1_src_mac --> Mac address of port 1 interface of il_trafficgen responder(sgi) p1_dst_mac --> Mac address of port 1 interface of data-plane(sgi) pps --> PPS(Packets Per Second) value to be used pkt_size --> Packet size to be used protocol --> Protocol to be used. Ex: tcp/udp proto_type --> Protocol type to be used. Ex: ipv4 core_list --> Cores to be used by il_trafficgen application NUMA0/1_MEM --> NUMA node to be used by il_trafficgen application

Execution

Note: Configure and Run data-plane application before start sending traffic by il_trafficgen generator.

Run 'il_nperf.sh' located in /opt/il_trafficgen/pktgen

1. Start il_trafficgen (as generator)in one terminal
cd /opt/il_trafficgen/pktgen
./il_nperf.sh –g

wait for the il_trafficgen command prompt to appear on screen.

2. Start il_trafficgen (as responder)in another terminal
cd /opt/il_trafficgen/pktgen
./il_nperf.sh –r

Wait for the il_trafficgen command prompt to appear on screen.


3. To send uplink traffic
Execute "start 0" to generate Uplink traffic(i.e., P0-Tx --> P1-Rx) on GENERATOR prompt.
>start 0

4. To send downlink traffic
Execute "start 0" to generate Downlink traffic(i.e., P0-Rx <-- P1-Tx) on RESPONDER prompt.
>start 0

5. To send traffic uplink and downlink run step 3 and 4 simultaneously.

il_trafficgen stops automatically, after test-duration. If test-duration is set to 0, packet transmission happens indefinitely. So, use 'stp' command to stop packet tranmission Logs for the current run will be stored in /opt/il_trafficgen/pktgen/autotest/log/il_trafficgen-data-plane_debug_<DD_MM_YYYY_HH_MM_S>.log

Uninstall il_trafficgen

1. cd /opt/il_trafficgen/pktgen
2. Execute command: "make clean"

Known Issues and Limitations

1. while switching from ng4t to il_trafficgen using switch_ng4t_ilnperf.sh script, traffic will not flow out of il_trafficgen's generator/responder. We need to restart both generator and responder to be able to send traffic successfully.