Release v1.0

Changes:

• D3 & D2 part numbers changed for availability on JLCPCB.
• KiCAD design files updated to KiCAD V8 format.

ERRATA:

• None

Firmware

A build of budgetcan_fw is provided for convenience, built to the canablev2 target - FD is supported. You can flash it with: https://devanlai.github.io/webdfu/dfu-util/

Note: Linux kernel only supports CAN FD with the gs_usb driver after 5.18.

Revision C

Changes:

• Silkscreen corrected.
• Teardrops added.
• Thermal relief added on 0V solder-able jumpers to make easier to solder.

ERRATA:

• None

Firmware

A build of budgetcan_fw is provided for convenience, built to the canablev2 target - FD is supported. You can flash it with: https://devanlai.github.io/webdfu/dfu-util/

Note: Linux kernel only supports CAN FD with the gs_usb driver after 5.18.

Revision B

ERRATA:

1. Solder jumper pin out silkscreen is reversed! (E.g. 1-8 instead of 8-1.)