Liteqube 4.2

In this project, I will explore Liteqube and try to adapt it to Qubes 4.2 and Debian 12.

In a first attempt, I will review all source code and

• change any reference to old Debian versions to Debian 12 / bookworm and
• change any reference to Qubes 4.1 into Qubes 4.1

At this stage, I will NOT change any API calls etc, so the resut will probably not run. API calls etc are handled in the second stage.

I also plan to add more documentation to the project by adding my insights during working thru the code.

Please note that while I make this fork public available, this is not ready for usage. However, cooperation requests are welcome.

I would like to also contact directly the initial project creator, a-abrinov, however, I have not yet discoverd a way to contact him. If you read this and you are a-barinov, please feel free to contact me, may be we could work together.

Sao Martinho do Porto, 2024-01-29 Kai Froeb https://kai.froeb.net

Liteqube puts Qubes OS on a diet

Liteqube was created in 2017 to run Qubes on a rather low-spec GPD Win 2 (Core m3-7Y30, 8Mb RAM). Taking 2Gb of RAM to run dom0 and fully torified set of services, it allowed me to use a device with 8MB of RAM quite comfortably.

5 years further down the road, Liteqube grew wider but not fatter and still pursues the original goals:

1. Low memory consumption; 1Gb of RAM required to run network, firewall, tor and usb qubes
2. Services isolation: every service gets a separate qube to minimise damage from potential exploits; to the extent what default Qubes installation cannot offer due to heavy resource consumption of the default system qubes.
3. Stateless disposable qubes for most of the services interacting with outside world
4. Easy on ssd: most qubes run with read-only root fs, most volatile folders are kept on tmpfs
5. Minimal modifications to dom0: Litequbes is generally self-contained, the only requirement is to have several rpc policies for vm-to-vm communications and vm-to-dom0 notifications

To illustrate Liteqube impact on Qubes resource consumption, here is boot time and memory usage of a torified out-of-the-box Qubes 4.1-rc3 install on OneMix 4 (Core i5-1130G7, 16Gb RAM):

> systemd-analyze
Startup finished in 6.039s (firmware) + 6.691s (loader) + 8.200s (kernel) + 19.703s (initrd) + 45.331s (userspace) = 1min 25.966s
graphical.target reached after 45.228s in userspace

> xentop -bfi 1
        NAME     MEM(k) MEM(%)  MAXMEM(k) MAXMEM(%) VCPUS   VBD_RD   VBD_WR  VBD_RSECT  VBD_WSECT
    Domain-0    4177920   25.3    4195328      25.4     4        0        0          0          0
sys-firewall    4079680   24.7    4097024      24.8     2     5932      964     558692      96832
     sys-net     393260    2.4     410624       2.5     2    14359     6426    1191636     211592
  sys-net-dm     147456    0.9     148480       0.9     1      180        0      34106          0
     sys-usb     290860    1.8     308224       1.9     2    25147     9662    1883740     380312
  sys-usb-dm     147456    0.9     148480       0.9     1      180        0      34106          0
  sys-whonix    4079680   24.7    4097024      24.8     2     6918     1168     620324      69968

Here is the same install with Liteqube taking over network, firewall, tor and usb qubes:

> systemd-analyze
Startup finished in 6.148s (firmware) + 8.208s (loader) + 8.226s (kernel) + 17.339s (initrd) + 19.660s (userspace) = 59.583s
graphical.target reached after 19.636s in userspace

> xentop -bfi 1
       NAME     MEM(k) MEM(%)  MAXMEM(k) MAXMEM(%) VCPUS   VBD_RD   VBD_WR  VBD_RSECT  VBD_WSECT
   Domain-0    4177920   25.3    4195328      25.4     4        0        0          0          0
     fw-net     131136    0.8     132096       0.8     1    10426       53     736694       4672
   core-net     180268    1.1     197632       1.2     1    27959       56    2064342       4856
core-net-dm     147456    0.9     148480       0.9     1      181        0      34114          0
   core-usb     163884    1.0     181248       1.1     1     8076       53     570918       4672
core-usb-dm     147456    0.9     148480       0.9     1      181        0      34114          0
   core-tor     147520    0.9     148480       0.9     1    40586       31    3365078        368

You can see significantly reduced memory consumption, boot time and amount of disk writes.

Here is how this level of efficiency is achieved:

• Minimised Debian template is used to run the service qubes, spinned off from debian-11-minimal. It does not have a single package installed that's not required for the setup to work. Base system takes around 800Mb of disk space, it then goes up as additional services (e.g. tor, network-manager) are installed. This is the only template qube used so keeping the whole setup up-to-date is easy.
• Most services run in disposable qubes ensuring these qubes are completely stateless. Notable exceptions are tor qube that needs to update guard nodes, and mail-receiving qube that needs to keep what's received in case power fails, Qubes OS crashes, or any other disaster occurs.
• To initialise disposable qubes based on single template, a qube templating & boot-time check mechanism is used, inspired by vm-boot-protect project.
• Qubes that don't need xorg for operation (most of them, really) run headless. A custom split-xorg setup is used in case you need an emergency shell.
• Valuable stuff (files, passwords, ssh and gpg keys) are stored in a separate offline qube that provides key material to qubes that need it.
• Existing Qubes install (both dom0 and user qubes) remains untouched. Liteqube will install a few packages to dom0 (if not installed already): qubes-template-debian-11-minimal, parted and gdisk, zenity and dialog, . The first three can be removed after the installation completes. Some rpc scripts and policies will be installed into /etc/qubes-rpc, all named liteqube.xxx so auditing them is easy. Some optional but helpful scripts will be put into ~/bin folder with lq-xxx naming pattern.

How to install:

1. Download liteqube-0.92.tar.gz here:.
2. Transfer it to dom0 and unpack to a folder of your choice.
3. Go to '1.Base' folder, review, edit / change settings as needed and run install.sh script there.
4. Once base system is installed, proceed with installation of the components you need from other folders.
5. All components have uninstall.sh script to remove all the qubes created. The uninstall scripts are to be run in the reverse order with base uninstall to be run last, it will remove any remmants of Liteqube.
6. All components have custom folder that allows you to automate installation customisation. There is a README.md file is these folders helping you to create a custom install overlay.

Here is a detailed description of the installation process (if needed) and qubes installed by each of the components.

Base

The foundation of Liteqube is debian-core qube. This is the only TemplateVM used, which makes system updates easy by limiting it to a single qube update. debian-core has a minimised package set (smaller than debian-minimal) and therefore minimal footprint and attack surface.

Liteqube uses custom qube templating service called 'liteqube-vm-template', it is heavily inspired by vm-boot-protect. This service recreates specified qube configuration early at boot stage, as described in /etc/protect folder, and also quarantines (to /rw/QUARANTINE) or deletes any files not fitting the described configuration. In case of quarantine you will see a 'Files quarantined' notification during qube start.

Most qubes based on debian-core run headless. To run a shell when needed, a qube called core-xorg is created and other qubes can use it to show graphical apps (mainly terminal) to the user using split-xorg mechanism. lq-xterm script is put into dom0 to seamlessly run a terminal in any of Liteqube vms, headless or not.

To support creation of disposable qubes, a template qube called core-dvm is created. It has no function and if run it will remove any files from its private storage (therefore ensuring a blank starting point) and then immediately shut down.

core-keys qube is installed to avoid storing confidential information required by disposable qubes inside debian-core or core-dvm. Base install does not need this qube but many other components will.

A few installation notes:

• You will need to respond 'Yes' once during the install as partition table changes in gdisk are not fully scriptable.
• You will get one 'debian-core: files quarantined during boot' error message and one 'core-keys: files quarantined during boot' error message. This is normal and happens when templating mechanism gets rolled out first time.
• There are two serious qubes backup bugs, #5393 and #7176. First one leaves you with corrupt backups, second with inability to restore. You've been warned!

Network

This script will create two firewalls (fw-net and fw-tor, equivalent of sys-firewall), network qube (core-net, equivalent of sys-net), tor qube (core-tor, equivalent of whonix-gw) and a separate qube to handle system updates (core-update).

Two firewall options are offered, linux-based firewall and mirage-firewall, with mirage-firewall installed by default. Two firewalls are created by default: fw-net shields the whole system from core-net and fw-tor shields torified qubes from core-tor. That's extra-secure setup, fw-tor is not strictly necessary and can be deleted, in which case you need to set core-tor as network vm for core-update. Once firewall is set up you can set fw-tor (or core-tor) as net vm for any qube you want to torify.

Network qube core-net is disposable by default, it can be switched to normal appvm in the installation script settings. Disposable core-net makes it more secure but also means any new access points will not be saved automatically. You will need to manually add any newly added access points to either debian-core or core-keys, more on this below.

One of the security problems with disposable core-net is that your wifi passwords need to be stored in the template qube (debian-core). This makes your passwords available in many insecure qubes which are lucrative attack targets (e.g. core-usb, core-print). To mitigate this risk, 'cold' storage of access points containing passwords is used, provided by core-keys qube. This qube stores files (as well as passwords, ssh and gpg keys) and provides it to other qubes in a reasonably secure fashion. File provisioning is handled by liteqube.SplitFile service.

core-net uses wifi mac randomisation on a per-accesspoint basis. The randomisation is driven by 512b secret_key file located in /var/lib/NetworkManager. Note that anyone who has this key can de-anonymise your device on public wifi networks. Similarly, core-tor uses per-accesspoint list of guardian nodes, making your device de-anonimisation on public networks even harder.

core-tor also acts as clockvm, synchronising time with several onion services via htpdate. Sdwdate is not used as its approach to portability is a joke, deb package depends on full gcc toolchain and compiles the package in place. I'm not ready to keep full gcc toolchain installed just for time synchronisation, therefore htpdate is used despite sdwdate being vastly superior.

During the installation, your dom0 update source will be changed to onion Qubes OS site. I hope you don't mind.

If core net crashes or hangs on start (can happen if your network drivers require more memoty than intel's), try increasing memory allocated to 'core-net' from 208Mb to something bigger.

USB

This will create core-usb disposable qube and assign all sys-usb devises to it. Usbguard is deployed by default and is configured to only accept usb disks. To allow other device types (input devices, usb hubs, cameras, etc) you will need to tweak /etc/usbguard/rules.conf in debian-core.

If USB_INPUT_DEVICES is set to True in the installation script (it is by default) then /etc/qubes-rpc/qubes.Input* files will be installed, allowing dom0 input to come from USB devices. This is a security risk, you've been warned.

VPN

The intent is to create a fire-and-forget qube that connects to VPN server once started and routes and acts as netvm for any connected qubes, routing all traffic through VPN. There are 3 vpn types currently supported:

1. OpenVpn. Only password authentication is currently supported.
2. Redirection of tcp traffic through SSH connection; local dns is used. Only ssh key authentication is currently supported.
3. Redirection of tcp traffic through SSH connection; dns-over-http (DoH) is used for dns lookups. Only ssh key authentication is currently supported. You can initiate a connection on qube start (look at settings-qube.sh) and switch to another connection on the fly (look at lq-vpn command installed to dom0). Have a look at 'lq-addkey' command if you need to add keys to keys qube (core-keys) after installation.

Storage

This creates a set of qubes that provide secure and transparent access to encrypted storage devices like usb sticks. The approach is based on 3 layers, separating device access, decryption and working with decrypted filesystem:

1. Storage device qubes, either usb qube for external devices or disposable network-connected qube fo online storage.
2. Disposable qube (core-decrypt) that accesses encrypted device, gets decryption password from core-keys qube and decrypts. Currently only luks/luks2 encryption is supported.
3. Disposable qube that mounts decrypted filesystem and lets you work with the files. This qube is not created during install as you likely want it to be based on a more functional template than debian-core,

In addition, core-iscsi qube can be created, allowing to use NAS for data storage in a secure fashion, including support for secure online backups.

RDP

Disposable VM to run remote desktop sessions. RDP (full support, including sound) and VNC (experimental) are currently supported. Passwords are obtained from core-keys.

Audio

This creates audio qube called core-sound, that can then be set as audiovm for other qubes. It generally follows Qubes approach to audio service provisioning, except using tiny custom shell script to run pacat-simple-vchan for each qube requiring sound service instead of default monstrous python script with runtime x.org dependency. lq-volume script is provided in dom0 to fine-tune pulseaudio volume.

Print

Creates printing qube called core-print. This qube has two modes of operation, with and without preview of file to be printed:

• Without preview, any pdf file sent via qvm-copy will be automatically sent to default printer. Nice for small home printers that don't really have printing options.
• With preview enabled, any file sent to print qube will be opened in pdf previewer (zathura-pdf-poppler by default), you can then print it from there to any installed printer and with any options. In addition to creating core-print qube, setup script can create "Qubes Printer" for selected qubes, that is based on cups-pdf. You can then print to this printer, and resulting pdf will be sent to core-print automatically. In case you don't enable print file preview, this creates almost seamless printing experience with printer shared across multiple qubes.

Mail

Liteqube mail setup assumes you have offline qube with mail reader (e.g. Thunderbird) that uses two separate qubes, core-getmail and core-sendmail to receive and sent mail; getmail and msmtp are used for this. Installer will create needed configs for you, and you can tweak those later if desired. Getmail configs are in core-getmail qube in /home/user/getmail dir; with one dir per account and getmailrcconfig file in each folder. Please note that default config assumes deleting received mail from server. Msmtp config is located in /etc/protect/template.core-sendmail/home/user/.msmtprc.in debian-core qube.

Since some mail readers (e.g. Thunderbird) cannot use command line to receive and send mail, a small adapter is created, that emulates pop3 and smtp server on ports 1110 and 1025 respectively. The adapter is put into /home/user/.mail folder in your mail qube. To use it, run Thunderbird through it (~/.mail/lq-mailer thunderbird) and create an account that receives mail via pop3 on localhost:1110 (you can use any username and password) and sends mail through localhost:1025 {Connection security: None, Authentication method: No authentication}.

To automatically check mail every 30 minutes (configurable), a systemd user service can be created in dom0.

Templating mechanism

This is the key service allowing Liteqube to run different disposable qubes off the same template. It runs very early on boot and checks private partition to ensure it contains only the files needed. Any file not fitting the configuration is put into quarantine or deleted. Setup is driven by /etc/protect folder that has 4 components:

• Main script vm-boot-protect.sh, and per-vm settings.<vm name> is where you can set global or vm-specific settings. Main script is reasonably well-documented.
• File dispatcher: template.ALL and template.<qube name> hold files that shall be present in /rw folder. Permissions and content of the files/folders will be set exactly as in /etc/protect folder. Qube-specific files take precedence over template.ALL files.
• File checker: checksum.ALL and checksum.<vm name> hold checksums of the files that shall be present in /rw folder but cannot be held in debian-core for confidentiality reasons. Permissions of the files/folders will be set exactly as in /etc/protect folder. Each checksum file contains 2 lines, sha256 and sha512 checksum. Vm-specific files take precedence over checksum.ALL files.
• In case you need to ignore a file, it shall be put into whitelist.<vm name>. To ignore all files or all dirs in a certain dir, put .any_file or .any_dir file into a dir.

Using 'core-keys' for key or password storage

As of Liteqube 0.93, core-keys supports providing files, passwords, ssh and gpg keys (collectively called key material) to other qubes on request. You can use lq-addkey command in dom0 to put key material into core-keys qube. This script provides instructions on how to retrieve key material in the qube that needs to use it. Here are some details on the underlying setup in case you want to do some customisations:

• Files: In core-keys, you need to save a file under /home/user/<qube name>/<filename>, this file can then be requested only by that qube through liteqube.SplitFile service. Don't forget that this file needs to be added to /etc/protect dir (either as checksum or whitelist) otherwise it will be quarantined during the next core-keys start.
• Passwords: /home/user dir contains password-<qube name> scripts, receiving token (e.g. username) as command line option and printing password to stdout. It is called by liteqube.SplitPassword service that can be used by other qubes for password provisioning. If there is no password present in core-keys, a it will call liteqube.SplitPassword in dom0, you will then be prompted for password and also prompted if it shall be saved into core-keys.
• SSH keys: this is based on ability of ssh to use ssh-agent over a socket that can be passed from a different qube. You store your ssh keys in core-keys in /home/user/.ssh as you would do normally. In a qube that needs to use these keys you should start liteqube-split-ssh.socket and you should not start local ssh-agent.
• GPG keys: similar to ssh-agent, this is based on gpg-agent being able to work over socket passed from another qube. This setup assumes your master key is located in vault and you use subkey of that key for email encryption and signing. Add your private and public subkeys to gpg in core-keys qube, and add your public key to a qube that needs to use private subkey securely. In that qube you should start liteqube-split-gpg.socket and you should not start local gpg-agent.

Using Tor Browser with 'core-tor'

1. Create an AppVM for Tor Browser
2. Set 'core-tor' as netvm for your AppVM
3. Install Tor Browser into AppVM. For this instruction '~/.torbrowser' is assumed to be your installation path.
4. In 'debian-core' run 'tor --hash-password 'your password'
5. In 'debian-core' edit '/etc/tor/torrc' and add the following lines:

    ControlPort 10.x.x.x:9051 # where ip is your 'core-tor' ip
    HashedControlPassword xxxxxxxxxx # with password hash you obtained in step 4

6. In AppVM create the following Tor Browser launcher script, e.g. '~/torbrowser.sh'

    #!/bin/sh
    TOR_CONTROL_PASSWD='"xxxxxxxxxx"'   # Note nested quotes around password
    exec ~/.torbrowser/Browser/start-tor-browser --detach --allow-remote

7. Run Tor Browser
8. Got to 'about:config' and change the following settings:

    network.proxy.socks = 10.x.x.x (ip of 'core-tor')
    network.proxy.socks_port = 9050
    extensions.torbutton.inserted_button true
    extensions.torbutton.launch_warning false
    extensions.torbutton.loglevel 2
    extensions.torbutton.logmethod 0
    extensions.torlauncher.control_port 9051
    extensions.torlauncher.loglevel 2
    extensions.torlauncher.logmethod 0
    extensions.torlauncher.prompt_at_startup false
    extensions.torlauncher.start_tor false

9. Restart Tor Browser

Credits for this instruction go to @dostisurta on github

Using Thunderbird with split-gpg

Since version 78, Thunderbird uses built-in PGP implementation that does not work with split gpg. Here are the steps needed switch to using external gpg binary, assuming you already imported your gpg keys into core-keys and Thunderbird qubes:

1. Go to the Thunderbird preferences. In the "General" section you will find config editor at the bottom of the page.
2. Search for the 'mail.openpgp.allow_external_gnupg' key. Double click it in order to set it to true.
3. Find key id by running gpg --list-secret-keys --keyid-format longThe output will look similar to this, with key id being FEDCBA9876543210 in the last line:

    sec#  rsa4096/0123456789ABCDEF 2023-01-01 [C]
          0123456789ABCDEF0123456789ABCDEF01234567
    uid                 [ unknown] Your Name <your.name@mailserver.com>
    ssb   rsa4096/FEDCBA9876543210 2023-01-01 [SE] [expires: 2026-01-01]

4. Tell Thunderbird to use your private key for a specific account: open account settings, go the the End-To-End Encryption section and under the section OpenPGP click Add Key; Select External GnuPG key and enter key id from the previous step.
5. Export your public key by running gpg --armor --export <key id>! > <filename>
6. Import your public key: go to Tools->OpenPGP Key Manager, click on File->Import Public Key(s) from file and select the previously exported GPG key.
7. If you have additional identities and want to enable GPG encryption for those you can go to Account Settings->Main page->Manage Identities (at the bottom)->Add. Once identity is saved, edit it, go to the End-To-End Encryption Tab and set your key repeating steps 3-6 above.
8. In Account Settings->End-To-End Encryption set your default encrypt/sign settings
9. Restart Thunderbird and send a test email to check your new setup.

Further development

The only bit to add before 1.0 release is tray applet providing user-friendly access to liteqube functionality.

The following components will be added after 1.0 release:

• RDP/VNC: polish vnc support
• USB: add bluetooth support
• Dispvm core-net: suggest saving new WiFi accesspoints
• Base: add plausible deniability support for luks password, core-keys and vault qubes
• Base: add secure boot support and ability to store luks key on TPM chip
• GUI: create core-gui qube that works with video card directly

The following improvements can be made to further enhance security, stability and performance of the setup, but are currently not a priority:

• Improve security of Liteqube systemd services using builtin systemd tools.
• Use SELinux (preferred but very difficult due to lack of default profiles) or AppArmour (easier but possibly less secure) to improve security of the apps (networkmanager, tor, exim, getmail, etc) used.
• Add accelerated (see #130) mirage firewall.
• Move from shell scripts to Salt. Liteqube for Qubes 4.1 was started as a set of salt scripts but I switched to pure shell once I realised I spend more time fighting with salt formulas than improving Liteqube.

Changelog

25 December 2021, version 0.90 'Bare Essentials':

• Initial relese
• Includes base system, network and usb components

12 February 2022, version 0.91 'Almost There':

• All changes to debian-core are now persistent and survive system updates
• Added vpn, storage, vnc/rdp and audio qubes

26 June 2022, version 0.92

• Added printing support
• Added mirage firewall working on Qubes 4.1, switched to mirage firewall by default
• Fixed empty folders not pulled into git repo, ruining the installation

01 January 2023, version 0.93:

• Added mail qubes support
• Complete functionality (files, passwords, ssh and gpg keys) for core-keys, lq-addkey script to make it easy for the users
• Improved vpn to support OpenVPN, DNS-over-HTTP and on-the-fly connection switch
• Added mic sharing for audio qube
• Adjusted memory allocation for Qubes 4.1