Update y000000000029.cfg (#6373)

* Update y000000000029.cfg

Added ${yealink_call_info_display_method} setting to template

* Update y000000000067.cfg

* Update y000000000107.cfg

* Update y000000000028.cfg

* Update y000000000066.cfg

* Update y000000000108.cfg

* Update y000000000035.cfg

* Update y000000000065.cfg

* Update y000000000109.cfg

* Update y000000000051.cfg

* Update y000000000028.cfg

* Update y000000000029.cfg

* Update y000000000036.cfg

* Update y000000000054.cfg

* Update y000000000065.cfg

* Update y000000000066.cfg

* Update y000000000067.cfg

* Update y000000000068.cfg

* Update y000000000076.cfg

* Update y000000000107.cfg

* Update y000000000108.cfg

* Update y000000000109.cfg

* Update y000000000116.cfg

resources/templates/provision/yealink/t42g/y000000000029.cfg

@@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t42s/y000000000067.cfg

@@ -441,7 +441,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t43u/y000000000107.cfg

@@ -478,7 +478,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t46g/y000000000028.cfg

@@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t46s/y000000000066.cfg

@@ -441,7 +441,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t46u/y000000000108.cfg

@@ -478,7 +478,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t48g/y000000000035.cfg

@@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t48s/y000000000065.cfg

@@ -481,7 +481,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t48u/y000000000109.cfg

@@ -478,7 +478,7 @@ features.password_dial.length=
 features.password_dial.prefix=
 features.password_dial.enable=
 features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
 features.headset_training=
 features.headset_prior=

resources/templates/provision/yealink/t49g/y000000000051.cfg

@@ -858,7 +858,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t4x/y000000000028.cfg

@@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t4x/y000000000029.cfg

@@ -898,7 +898,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t4x/y000000000036.cfg

@@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t4x/y000000000054.cfg

@@ -899,7 +899,7 @@ phone_setting.contact_photo_display.enable = 0
 phone_setting.called_party_info_display.enable = 1
 
 #Configure the call information display method 0 = Name + Number, 1 = Number + Name, 2 = Name, 3 = Number, 4 = Full contact info
-phone_setting.call_info_display_method = 0
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 
 #Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
 phone_setting.inter_digit_time = {$yealink_inter_digit_time}

resources/templates/provision/yealink/t4x/y000000000065.cfg

@@ -454,48 +454,48 @@ features.anonymous_response_code=
 #######################################################################################
 ##                          Call Configuration                                       ##
 #######################################################################################
-phone_setting.incoming_call_when_dialing.priority=
-phone_setting.hold_or_swap.mode=
-features.play_held_tone.interval=
-features.play_held_tone.delay=
-features.play_held_tone.enable=
-features.play_hold_tone.interval=
-features.ignore_incoming_call.enable=
-force.voice.ring_vol=
-features.mute.autoanswer_mute.enable=
+phone_setting.incoming_call_when_dialing.priority =
+phone_setting.hold_or_swap.mode =
+features.play_held_tone.interval =
+features.play_held_tone.delay =
+features.play_held_tone.enable =
+features.play_hold_tone.interval =
+features.ignore_incoming_call.enable =
+force.voice.ring_vol =
+features.mute.autoanswer_mute.enable =
 features.play_hold_tone.delay =
 phone_setting.end_call_net_disconnect.enable =
-features.custom_auto_answer_tone.enable=
-default_input_method.dialing=
-features.speaker_mode.enable=
-features.headset_mode.enable=
-features.handset_mode.enable=
+features.custom_auto_answer_tone.enable =
+default_input_method.dialing =
+features.speaker_mode.enable =
+features.headset_mode.enable =
+features.handset_mode.enable =
 features.conference.local.enable =
-features.off_hook_answer.enable=
-features.caller_name_type_on_dialing=
-phone_setting.show_code403=
-phone_setting.ring_for_tranfailed=
-features.password_dial.length=
-features.password_dial.prefix=
-features.password_dial.enable=
-features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+features.off_hook_answer.enable =
+features.caller_name_type_on_dialing =
+phone_setting.show_code403 =
+phone_setting.ring_for_tranfailed =
+features.password_dial.length =
+features.password_dial.prefix =
+features.password_dial.enable =
+features.group_listen_in_talking_enable =
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
-features.headset_training=
-features.headset_prior=
+features.headset_training =
+features.headset_prior =
 features.dtmf.replace_tran =
 features.dtmf.transfer =
 phone_setting.ringing_timeout = {$yealink_ringing_timeout}
-phone_setting.ringback_timeout=
-features.hold_trans_delay=
+phone_setting.ringback_timeout =
+features.hold_trans_delay =
 transfer.multi_call_trans_enable =
-features.keep_mute.enable=
-linekey.1.shortlabel=
+features.keep_mute.enable =
+linekey.1.shortlabel =
 features.config_dsskey_length.shorten =
 transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode}
-features.auto_linekeys.enable=
-phone_setting.call_appearance.calls_per_linekey=
-features.linekey_call_with_default_account=
+features.auto_linekeys.enable =
+phone_setting.call_appearance.calls_per_linekey =
+features.linekey_call_with_default_account =
 
 
 #######################################################################################

resources/templates/provision/yealink/t4x/y000000000066.cfg

@@ -413,48 +413,48 @@ features.anonymous_response_code=
 #######################################################################################
 ##                          Call Configuration                                       ##
 #######################################################################################
-phone_setting.incoming_call_when_dialing.priority=
-phone_setting.hold_or_swap.mode=
-features.play_held_tone.interval=
-features.play_held_tone.delay=
-features.play_held_tone.enable=
-features.play_hold_tone.interval=
-features.ignore_incoming_call.enable=
-force.voice.ring_vol=
-features.mute.autoanswer_mute.enable=
+phone_setting.incoming_call_when_dialing.priority =
+phone_setting.hold_or_swap.mode =
+features.play_held_tone.interval =
+features.play_held_tone.delay =
+features.play_held_tone.enable =
+features.play_hold_tone.interval =
+features.ignore_incoming_call.enable =
+force.voice.ring_vol =
+features.mute.autoanswer_mute.enable =
 features.play_hold_tone.delay =
 phone_setting.end_call_net_disconnect.enable =
-features.custom_auto_answer_tone.enable=
-default_input_method.dialing=
-features.speaker_mode.enable=
-features.headset_mode.enable=
-features.handset_mode.enable=
+features.custom_auto_answer_tone.enable =
+default_input_method.dialing =
+features.speaker_mode.enable =
+features.headset_mode.enable =
+features.handset_mode.enable =
 features.conference.local.enable =
-features.off_hook_answer.enable=
-features.caller_name_type_on_dialing=
-phone_setting.show_code403=
-phone_setting.ring_for_tranfailed=
-features.password_dial.length=
-features.password_dial.prefix=
-features.password_dial.enable=
-features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+features.off_hook_answer.enable =
+features.caller_name_type_on_dialing =
+phone_setting.show_code403 =
+phone_setting.ring_for_tranfailed =
+features.password_dial.length =
+features.password_dial.prefix =
+features.password_dial.enable =
+features.group_listen_in_talking_enable =
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
-features.headset_training=
-features.headset_prior=
+features.headset_training =
+features.headset_prior =
 features.dtmf.replace_tran =
 features.dtmf.transfer =
 phone_setting.ringing_timeout = {$yealink_ringing_timeout}
-phone_setting.ringback_timeout=
-features.hold_trans_delay=
+phone_setting.ringback_timeout =
+features.hold_trans_delay =
 transfer.multi_call_trans_enable =
-features.keep_mute.enable=
-linekey.1.shortlabel=
+features.keep_mute.enable =
+linekey.1.shortlabel =
 features.config_dsskey_length.shorten =
 transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode}
-features.auto_linekeys.enable=
-phone_setting.call_appearance.calls_per_linekey=
-features.linekey_call_with_default_account=
+features.auto_linekeys.enable =
+phone_setting.call_appearance.calls_per_linekey =
+features.linekey_call_with_default_account =
 
 
 #######################################################################################

resources/templates/provision/yealink/t4x/y000000000067.cfg

@@ -413,48 +413,48 @@ features.anonymous_response_code=
 #######################################################################################
 ##                          Call Configuration                                       ##
 #######################################################################################
-phone_setting.incoming_call_when_dialing.priority=
-phone_setting.hold_or_swap.mode=
-features.play_held_tone.interval=
-features.play_held_tone.delay=
-features.play_held_tone.enable=
-features.play_hold_tone.interval=
-features.ignore_incoming_call.enable=
-force.voice.ring_vol=
-features.mute.autoanswer_mute.enable=
+phone_setting.incoming_call_when_dialing.priority =
+phone_setting.hold_or_swap.mode =
+features.play_held_tone.interval =
+features.play_held_tone.delay =
+features.play_held_tone.enable =
+features.play_hold_tone.interval =
+features.ignore_incoming_call.enable =
+force.voice.ring_vol =
+features.mute.autoanswer_mute.enable =
 features.play_hold_tone.delay =
 phone_setting.end_call_net_disconnect.enable =
-features.custom_auto_answer_tone.enable=
-default_input_method.dialing=
-features.speaker_mode.enable=
-features.headset_mode.enable=
-features.handset_mode.enable=
+features.custom_auto_answer_tone.enable =
+default_input_method.dialing =
+features.speaker_mode.enable =
+features.headset_mode.enable =
+features.handset_mode.enable =
 features.conference.local.enable =
-features.off_hook_answer.enable=
-features.caller_name_type_on_dialing=
-phone_setting.show_code403=
-phone_setting.ring_for_tranfailed=
-features.password_dial.length=
-features.password_dial.prefix=
-features.password_dial.enable=
-features.group_listen_in_talking_enable=
-phone_setting.call_info_display_method = 0
+features.off_hook_answer.enable =
+features.caller_name_type_on_dialing =
+phone_setting.show_code403 =
+phone_setting.ring_for_tranfailed =
+features.password_dial.length =
+features.password_dial.prefix =
+features.password_dial.enable =
+features.group_listen_in_talking_enable =
+phone_setting.call_info_display_method = ${yealink_call_info_display_method}
 phone_setting.called_party_info_display.enable = 1
-features.headset_training=
-features.headset_prior=
+features.headset_training =
+features.headset_prior =
 features.dtmf.replace_tran =
 features.dtmf.transfer =
 phone_setting.ringing_timeout = {$yealink_ringing_timeout}
-phone_setting.ringback_timeout=
-features.hold_trans_delay=
+phone_setting.ringback_timeout =
+features.hold_trans_delay =
 transfer.multi_call_trans_enable =
-features.keep_mute.enable=
-linekey.1.shortlabel=
+features.keep_mute.enable =
+linekey.1.shortlabel =
 features.config_dsskey_length.shorten =
 transfer.dsskey_deal_type = {$yealink_dsskey_transfer_mode}
-features.auto_linekeys.enable=
-phone_setting.call_appearance.calls_per_linekey=
-features.linekey_call_with_default_account=
+features.auto_linekeys.enable =
+phone_setting.call_appearance.calls_per_linekey =
+features.linekey_call_with_default_account =
 
 
 #######################################################################################