Generic:
- Futurocoind >=1.0.2
- Python >=2.7
- Twisted >=13.0.0
- Zope.interface >=3.8.0
Linux:
sudo apt-get install python-zope.interface python-twisted python-twisted-web python-dev
sudo apt-get install gcc g++
Download the required submodules:
git submodule init
git submodule update
dash_hash:
cd dash_hash
python setup.py install --user
To use P2Pool, you must be running your own local futurocoind and set rpcuser and rpcpassword in futurocoin.conf. For standard configurations, using P2Pool should be as simple as:
python run_p2pool.py
Then run your miner, connecting to pool IP adress on port 7903 with username set to your futurocoin address and any password.
If you are behind a NAT, you should enable TCP port forwarding on your router. Forward port 9998 to the host running P2Pool.
Run for additional options.
python run_p2pool.py --help
run_p2pool.py with option -n ADDR[:PORT] will allow to connect to an existing p2pool pool.futurocoin.org address is 149.202.197.10 you can use it to connect your p2pool if you want, optional use PORT 8999
-n ADDR[:PORT], --p2pool-node ADDR[:PORT]
If you have any problem, please use option -h, -- help
https://en.bitcoin.it/wiki/P2Pool
- https://github.com/hardcpp/P2PoolExtendedFrontEnd
- https://github.com/johndoe75/p2pool-node-status
- https://github.com/justino/p2pool-ui-punchy
Thanks to:
- The Bitcoin Foundation for its generous support of P2Pool
- The Litecoin Project for its generous donations to P2Pool
- The Vertcoin Community for its great contribution to P2Pool
- jakehaas, vertoe, chaeplin, dstorm, poiuty, elbereth and mr.slaveg from the Darkcoin/Dash Community