Releases: fvdhoef/aquarius-plus
Aquarius+ Emulator & Firmware V0.30
Emulator
- Correcting line at which v-blank interrupt is generated to align with hardware. (Thanks MackW for reporting!)
Emulator/Firmware
- PlusBASIC v0.22m
Aquarius+ Emulator & Firmware V0.29
Emulator / Firmware
- Updated plusBASIC to v0.22l
Aquarius+ Emulator & Firmware V0.28
NOTE: Unfortunately, GitHub has changed some of its certificates again. This release contains a few additional root certificates so that updategh
will work again, but you need to install this release by hand before the feature will work again.
Firmware
- Added extra root certificates to solve problem with
updategh
not working.
Aquarius+ Emulator & Firmware V0.27
Emulator / Firmware
- plusBASIC v0.22k
Aquarius+ Emulator & Firmware V0.26
NOTE: GitHub has changed its root certificate without notice! This means that the updategh
command in previous versions of the firmware will no longer work. This update will add the required root certificate to restore the functionality of the updategh
command, but updating to this version will have to be done manually. This means that you'll have to update by downloading the aquarius-plus.bin and putting it on the SD card of your Aquarius+. Then use the update
command instead to update from SD card to this version.
Firmware / Emulator
- plusBASIC v0.22g
Firmware
- Added new root certificate for GitHub.
- Updated ESP-IDF to V5.2.1
Aquarius+ Emulator & Firmware V0.25
Firmware / Emulator
- plusBASIC V0.22c
Aquarius+ Emulator & Firmware V0.24c
Firmware
- updategh command now checks for the latest available version and will install that when no version is specified
Aquarius+ Emulator & Firmware V0.24b
Emulator
- Adding option to save screenshots to Screen menu
Emulator/Firmware
- plusBASIC to v0.21w
Aquarius+ Emulator & Firmware V0.24a
Emulator / Firmware
- Added mouse wheel support to ESP GETMOUSE command
- plusBASIC to v0.21j
Aquarius+ Emulator & Firmware V0.24
This release changes the way the systems boots. The FPGA now only contains a small boot loader that in turn will load esp:boot.bin
, which will load plusbasic from esp:sysrom.bin
. This way future releases no longer require resynthesizing the FPGA core each release (only when there are actual FPGA firmware changes).
To be able to test system roms you can put a sysrom.bin
file on the SD card and boot.bin
will load that file instead of loading it from esp:
.
Physical cartridges are now started with system ROM S2 for maximum compatibility.
Important: if you use AQDS, please update your SD card, the older release is not compatible with this release.
Emulator / Firmware
- new boot structure
- plusBASIC v0.21e