3D Print

The STL Files are located on Thingiverse: here

I have printed all Parts with PLA (gears can also prunted in ABS) on an Prusa i3 MK3 printer with following quantity and settings:

Rafts: No Support: as needed, mostly no

Resolution: 0.1 Infill: 80%

• 1 x Bearingblock_Back_Bottom.stl
• 1 x Bearingblock_Back_Top.stl
• 1 x Bearingblock_Front_Bottom.stl
• 1 x Bearingblock_Front_Top.stl
• 1 x IR_Sensor_Pitch_Encoder.stl (needs to be printed in black color)
• 2 x Motor_775_Gear.stl
• 1 x Pitch_Gear.stl
• 1 x Yoke_Gear_150.stl
• 1 x Yoke_Pipe_Encoder.stl (needs to be printed in black color)

Resolution: 0.2 Infill: 60%

• 4 x LinearGuide_EndStop.stl
• 1 x LinearGuide_Plate.stl
• 2 x Motor_775_Holder.stl
• 2 x Sensor_Height_Block_Pitch.stl
• 1 x Yoke_Pipe_EndRing.stl
• 1 x Yoke_Pipe_EndRing_Sensor.stl
• 3 x Yoke_Pipe_Ring.stl
• 1 x Yoke_Pipe_Ring_Long.stl
• 1 x IR_Sensor_Holder_Pitch_Center
• 1 x IR_Sensor_Holder_Roll_Center
• 1 x IR_Sensor_Holder_Pitch_Center

for Housing

• 1 x LCD_Cover.stl
• 4 x LCD_Cover_Distance.stl
• 4 x Mainboard_Distance.stl
• 4 x Motordriver_Distance.stl
• 1 x Ventilator_Cover.stl