You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Geekworm has a new dual 2280 M.2 NVMe SSD HAT for the Pi 5, the Geekworm X1004.
It uses an ASMedia ASM1182e PCIe Gen 2 switch (meaning you can't use NVMe at Gen 3 speeds), and two M.2 sockets that hold 2280-size NVMe SSDs.
It doesn't have an external power input, so it needs to pull the 3.5 + 3.5A rated power for the ports through the Pi's FFC + GPIO pins, which it should be able to do as long as the Pi has an adequate power supply.
The pictured cable is also a basic FFC, not impedance-controlled, so I would fear some link errors could happen with that combination. But would have to test to verify.
The text was updated successfully, but these errors were encountered:
Geekworm has a new dual 2280 M.2 NVMe SSD HAT for the Pi 5, the Geekworm X1004.
It uses an ASMedia ASM1182e PCIe Gen 2 switch (meaning you can't use NVMe at Gen 3 speeds), and two M.2 sockets that hold 2280-size NVMe SSDs.
It doesn't have an external power input, so it needs to pull the 3.5 + 3.5A rated power for the ports through the Pi's FFC + GPIO pins, which it should be able to do as long as the Pi has an adequate power supply.
The pictured cable is also a basic FFC, not impedance-controlled, so I would fear some link errors could happen with that combination. But would have to test to verify.
The text was updated successfully, but these errors were encountered: