Pelican is configurable thanks to a settings file you can pass to the command line:
pelican content -s path/to/your/pelicanconf.py
If you used the pelican-quickstart
command, your primary settings file will be named pelicanconf.py
by default.
Note
When experimenting with different settings (especially the metadata ones) caching may interfere and the changes may not be visible. In such cases disable caching with LOAD_CONTENT_CACHE = False
or use the --ignore-cache
command-line switch.
Settings are configured in the form of a Python module (a file). There is an example settings file available for reference.
All the setting identifiers must be set in all-caps, otherwise they will not be processed. Setting values that are numbers (5, 20, etc.), booleans (True, False, None, etc.), dictionaries, or tuples should not be enclosed in quotation marks. All other values (i.e., strings) must be enclosed in quotation marks.
Unless otherwise specified, settings that refer to paths can be either absolute or relative to the configuration file.
The settings you define in the configuration file will be passed to the templates, which allows you to use your settings to add site-wide content.
Here is a list of settings for Pelican:
USE_FOLDER_AS_CATEGORY = True
When you don't specify a category in your post metadata, set this setting to True
, and organize your articles in subfolders, the subfolder will become the category of your post. If set to False
, DEFAULT_CATEGORY
will be used as a fallback.
DEFAULT_CATEGORY = 'misc'
The default category to fall back on.
DISPLAY_PAGES_ON_MENU = True
Whether to display pages on the menu of the template. Templates may or may not honor this setting.
DISPLAY_CATEGORIES_ON_MENU = True
Whether to display categories on the menu of the template. Templates may or not honor this setting.
DOCUTILS_SETTINGS = {}
Extra configuration settings for the docutils publisher (applicable only to reStructuredText). See Docutils Configuration settings for more details.
DELETE_OUTPUT_DIRECTORY = False
Delete the output directory, and all of its contents, before generating new files. This can be useful in preventing older, unnecessary files from persisting in your output. However, this is a destructive setting and should be handled with extreme care.
OUTPUT_RETENTION = []
A list of filenames that should be retained and not deleted from the output directory. One use case would be the preservation of version control data.
Example:
OUTPUT_RETENTION = [".hg", ".git", ".bzr"]
JINJA_ENVIRONMENT = {'trim_blocks': True, 'lstrip_blocks': True}
A dictionary of custom Jinja2 environment variables you want to use. This also includes a list of extensions you may want to include. See Jinja Environment documentation.
JINJA_FILTERS = {}
A dictionary of custom Jinja2 filters you want to use. The dictionary should map the filtername to the filter function.
Example:
JINJA_FILTERS = {'urlencode': urlencode_filter}
LOG_FILTER = []
A list of tuples containing the logging level (up to warning
) and the message to be ignored.
Example:
LOG_FILTER = [(logging.WARN, 'TAG_SAVE_AS is set to False')]
READERS = {}
A dictionary of file extensions / Reader classes for Pelican to process or ignore.
For example, to avoid processing .html files, set:
READERS = {'html': None}
To add a custom reader for the foo
extension, set:
READERS = {'foo': FooReader}
IGNORE_FILES = ['.#*']
A list of glob patterns. Files and directories matching any of these patterns will be ignored by the processor. For example, the default ['.#*']
will ignore emacs lock files, and ['__pycache__']
would ignore Python 3's bytecode caches.
MARKDOWN = {...}
Extra configuration settings for the Markdown processor. Refer to the Python Markdown documentation's Options section for a complete list of supported options. The extensions
option will be automatically computed from the extension_configs
option.
Defaults to:
MARKDOWN = {
'extension_configs': {
'markdown.extensions.codehilite': {'css_class': 'highlight'},
'markdown.extensions.extra': {},
'markdown.extensions.meta': {},
},
'output_format': 'html5',
}
Note
The dictionary defined in your settings file will update this default one.
OUTPUT_PATH = 'output/'
Where to output the generated files.
PATH
Path to content directory to be processed by Pelican. If undefined, and content path is not specified via an argument to the pelican
command, Pelican will use the current working directory.
PAGE_PATHS = ['pages']
A list of directories and files to look at for pages, relative to PATH
.
PAGE_EXCLUDES = []
A list of directories to exclude when looking for pages in addition to ARTICLE_PATHS
.
ARTICLE_PATHS = ['']
A list of directories and files to look at for articles, relative to PATH
.
ARTICLE_EXCLUDES = []
A list of directories to exclude when looking for articles in addition to PAGE_PATHS
.
OUTPUT_SOURCES = False
Set to True if you want to copy the articles and pages in their original format (e.g. Markdown or reStructuredText) to the specified OUTPUT_PATH
.
OUTPUT_SOURCES_EXTENSION = '.text'
Controls the extension that will be used by the SourcesGenerator. Defaults to .text
. If not a valid string the default value will be used.
PLUGINS = []
The list of plugins to load. See plugins
.
PLUGIN_PATHS = []
A list of directories where to look for plugins. See plugins
.
SITENAME = 'A Pelican Blog'
Your site name
SITEURL
Base URL of your website. Not defined by default, so it is best to specify your SITEURL; if you do not, feeds will not be generated with properly-formed URLs. You should include http://
and your domain, with no trailing slash at the end. Example: SITEURL = 'http://mydomain.com'
STATIC_PATHS = ['images']
A list of directories (relative to PATH
) in which to look for static files. Such files will be copied to the output directory without modification. Articles, pages, and other content source files will normally be skipped, so it is safe for a directory to appear both here and in PAGE_PATHS
or ARTICLE_PATHS
. Pelican's default settings include the "images" directory here.
STATIC_EXCLUDES = []
A list of directories to exclude when looking for static files.
STATIC_EXCLUDE_SOURCES = True
If set to False, content source files will not be skipped when copying files found in STATIC_PATHS
. This setting is for backward compatibility with Pelican releases before version 3.5. It has no effect unless STATIC_PATHS
contains a directory that is also in ARTICLE_PATHS
or PAGE_PATHS
. If you are trying to publish your site's source files, consider using the OUTPUT_SOURCES
setting instead.
TYPOGRIFY = False
If set to True, several typographical improvements will be incorporated into the generated HTML via the Typogrify library, which can be installed via: pip install typogrify
TYPOGRIFY_IGNORE_TAGS = []
A list of tags for Typogrify to ignore. By default Typogrify will ignore pre
and code
tags. This requires that Typogrify version 2.0.4 or later is installed
SUMMARY_MAX_LENGTH = 50
When creating a short summary of an article, this will be the default length (measured in words) of the text created. This only applies if your content does not otherwise specify a summary. Setting to None
will cause the summary to be a copy of the original content.
WITH_FUTURE_DATES = True
If disabled, content with dates in the future will get a default status of draft
. See reading_only_modified_content
for caveats.
INTRASITE_LINK_REGEX = '[{}]'
Regular expression that is used to parse internal links. Default syntax when linking to internal files, tags, etc., is to enclose the identifier, say filename
, in {}
or ||
. Identifier between {
and }
goes into the what
capturing group. For details see ref-linking-to-internal-content
.
PYGMENTS_RST_OPTIONS = []
A list of default Pygments settings for your reStructuredText code blocks. See internal_pygments_options
for a list of supported options.
SLUGIFY_SOURCE = 'title'
Specifies where you want the slug to be automatically generated from. Can be set to title
to use the 'Title:' metadata tag or basename
to use the article's file name when creating the slug.
CACHE_CONTENT = False
If True
, saves content in caches. See reading_only_modified_content
for details about caching.
CONTENT_CACHING_LAYER = 'reader'
If set to 'reader'
, save only the raw content and metadata returned by readers. If set to 'generator'
, save processed content objects.
CACHE_PATH = 'cache'
Directory in which to store cache files.
GZIP_CACHE = True
If True
, use gzip to (de)compress the cache files.
CHECK_MODIFIED_METHOD = 'mtime'
Controls how files are checked for modifications.
LOAD_CONTENT_CACHE = False
If True
, load unmodified content from caches.
WRITE_SELECTED = []
If this list is not empty, only output files with their paths in this list are written. Paths should be either absolute or relative to the current Pelican working directory. For possible use cases see writing_only_selected_content
.
FORMATTED_FIELDS = ['summary']
A list of metadata fields containing reST/Markdown content to be parsed and translated to HTML.
The first thing to understand is that there are currently two supported methods for URL formation: relative and absolute. Relative URLs are useful when testing locally, and absolute URLs are reliable and most useful when publishing. One method of supporting both is to have one Pelican configuration file for local development and another for publishing. To see an example of this type of setup, use the pelican-quickstart
script as described in the Installation <install>
section, which will produce two separate configuration files for local development and publishing, respectively.
You can customize the URLs and locations where files will be saved. The *_URL
and *_SAVE_AS
variables use Python's format strings. These variables allow you to place your articles in a location such as {slug}/index.html
and link to them as {slug}
for clean URLs (see example below). These settings give you the flexibility to place your articles and pages anywhere you want.
Note
If you specify a datetime
directive, it will be substituted using the input files' date metadata attribute. If the date is not specified for a particular file, Pelican will rely on the file's mtime
timestamp. Check the Python datetime documentation for more information.
Also, you can use other file metadata attributes as well:
- slug
- date
- lang
- author
- category
Example usage:
ARTICLE_URL = 'posts/{date:%Y}/{date:%b}/{date:%d}/{slug}/'
ARTICLE_SAVE_AS = 'posts/{date:%Y}/{date:%b}/{date:%d}/{slug}/index.html'
PAGE_URL = 'pages/{slug}/'
PAGE_SAVE_AS = 'pages/{slug}/index.html'
This would save your articles into something like /posts/2011/Aug/07/sample-post/index.html
, save your pages into /pages/about/index.html
, and render them available at URLs of /posts/2011/Aug/07/sample-post/
and /pages/about/
, respectively.
RELATIVE_URLS = False
Defines whether Pelican should use document-relative URLs or not. Only set this to True
when developing/testing and only if you fully understand the effect it can have on links/feeds.
ARTICLE_URL = '{slug}.html'
The URL to refer to an article.
ARTICLE_SAVE_AS = '{slug}.html'
The place where we will save an article.
ARTICLE_LANG_URL = '{slug}-{lang}.html'
The URL to refer to an article which doesn't use the default language.
ARTICLE_LANG_SAVE_AS = '{slug}-{lang}.html'
The place where we will save an article which doesn't use the default language.
DRAFT_URL = 'drafts/{slug}.html'
The URL to refer to an article draft.
DRAFT_SAVE_AS = 'drafts/{slug}.html'
The place where we will save an article draft.
DRAFT_LANG_URL = 'drafts/{slug}-{lang}.html'
The URL to refer to an article draft which doesn't use the default language.
DRAFT_LANG_SAVE_AS = 'drafts/{slug}-{lang}.html'
The place where we will save an article draft which doesn't use the default language.
PAGE_URL = 'pages/{slug}.html'
The URL we will use to link to a page.
PAGE_SAVE_AS = 'pages/{slug}.html'
The location we will save the page. This value has to be the same as PAGE_URL or you need to use a rewrite in your server config.
PAGE_LANG_URL = 'pages/{slug}-{lang}.html'
The URL we will use to link to a page which doesn't use the default language.
PAGE_LANG_SAVE_AS = 'pages/{slug}-{lang}.html'
The location we will save the page which doesn't use the default language.
CATEGORY_URL = 'category/{slug}.html'
The URL to use for a category.
CATEGORY_SAVE_AS = 'category/{slug}.html'
The location to save a category.
TAG_URL = 'tag/{slug}.html'
The URL to use for a tag.
TAG_SAVE_AS = 'tag/{slug}.html'
The location to save the tag page.
AUTHOR_URL = 'author/{slug}.html'
The URL to use for an author.
AUTHOR_SAVE_AS = 'author/{slug}.html'
The location to save an author.
YEAR_ARCHIVE_SAVE_AS = ''
The location to save per-year archives of your posts.
MONTH_ARCHIVE_SAVE_AS = ''
The location to save per-month archives of your posts.
DAY_ARCHIVE_SAVE_AS = ''
The location to save per-day archives of your posts.
SLUG_SUBSTITUTIONS = ()
Substitutions to make prior to stripping out non-alphanumerics when generating slugs. Specified as a list of 3-tuples of (from, to, skip)
which are applied in order. skip
is a boolean indicating whether or not to skip replacement of non-alphanumeric characters. Useful for backward compatibility with existing URLs.
AUTHOR_SUBSTITUTIONS = ()
Substitutions for authors. SLUG_SUBSTITUTIONS
is not taken into account here!
CATEGORY_SUBSTITUTIONS = ()
Added to SLUG_SUBSTITUTIONS
for categories.
TAG_SUBSTITUTIONS = ()
Added to SLUG_SUBSTITUTIONS
for tags.
Note
If you do not want one or more of the default pages to be created (e.g., you are the only author on your site and thus do not need an Authors page), set the corresponding *_SAVE_AS
setting to ''
to prevent the relevant page from being generated.
Note
Substitutions are applied in order with the side effect that keeping non-alphanum characters applies to the whole string when a replacement is made.
For example if you have the following setting:
SLUG_SUBSTITUTIONS = (('C++', 'cpp'), ('keep dot', 'keep.dot', True))
the string Keep Dot
will be converted to keep.dot
, however C++ will keep dot
will be converted to cpp will keep.dot
instead of cpp-will-keep.dot
!
If you want to keep non-alphanum characters only for tags or categories but not other slugs then configure TAG_SUBSTITUTIONS
and CATEGORY_SUBSTITUTIONS
respectively!
Pelican can optionally create per-year, per-month, and per-day archives of your posts. These secondary archives are disabled by default but are automatically enabled if you supply format strings for their respective _SAVE_AS
settings. Period archives fit intuitively with the hierarchical model of web URLs and can make it easier for readers to navigate through the posts you've written over time.
Example usage:
YEAR_ARCHIVE_SAVE_AS = 'posts/{date:%Y}/index.html'
MONTH_ARCHIVE_SAVE_AS = 'posts/{date:%Y}/{date:%b}/index.html'
With these settings, Pelican will create an archive of all your posts for the year at (for instance) posts/2011/index.html
and an archive of all your posts for the month at posts/2011/Aug/index.html
.
Note
Period archives work best when the final path segment is index.html
. This way a reader can remove a portion of your URL and automatically arrive at an appropriate archive of posts, without having to specify a page name.
DIRECT_TEMPLATES
work a bit differently than noted above. Only the _SAVE_AS
settings are available, but it is available for any direct template.
ARCHIVES_SAVE_AS = 'archives.html'
The location to save the article archives page.
YEAR_ARCHIVE_SAVE_AS = ''
The location to save per-year archives of your posts.
MONTH_ARCHIVE_SAVE_AS = ''
The location to save per-month archives of your posts.
DAY_ARCHIVE_SAVE_AS = ''
The location to save per-day archives of your posts.
AUTHORS_SAVE_AS = 'authors.html'
The location to save the author list.
CATEGORIES_SAVE_AS = 'categories.html'
The location to save the category list.
TAGS_SAVE_AS = 'tags.html'
The location to save the tag list.
INDEX_SAVE_AS = 'index.html'
The location to save the list of all articles.
URLs for direct template pages are theme-dependent. Some themes use corresponding *_URL
setting as string, while others hard-code them: 'archives.html'
, 'authors.html'
, 'categories.html'
, 'tags.html'
.
TIMEZONE
The timezone used in the date information, to generate Atom and RSS feeds.
If no timezone is defined, UTC is assumed. This means that the generated Atom and RSS feeds will contain incorrect date information if your locale is not UTC.
Pelican issues a warning in case this setting is not defined, as it was not mandatory in previous versions.
Have a look at the wikipedia page to get a list of valid timezone values.
DEFAULT_DATE = None
The default date you want to use. If 'fs'
, Pelican will use the file system timestamp information (mtime) if it can't get date information from the metadata. If given any other string, it will be parsed by the same method as article metadata. If set to a tuple object, the default datetime object will instead be generated by passing the tuple to the datetime.datetime
constructor.
DEFAULT_DATE_FORMAT = '%a %d %B %Y'
The default date format you want to use.
DATE_FORMATS = {}
If you manage multiple languages, you can set the date formatting here.
If no DATE_FORMATS
are set, Pelican will fall back to DEFAULT_DATE_FORMAT
. If you need to maintain multiple languages with different date formats, you can set the DATE_FORMATS
dictionary using the language name (lang
metadata in your post content) as the key.
In addition to the standard C89 strftime format codes that are listed in Python strftime documentation, you can use the -
character between %
and the format character to remove any leading zeros. For example, %d/%m/%Y
will output 01/01/2014
whereas %-d/%-m/%Y
will result in 1/1/2014
.
- DATE_FORMATS = {
'en': '%a, %d %b %Y', 'jp': '%Y-%m-%d(%a)',
}
It is also possible to set different locale settings for each language by using a (locale, format)
tuple as a dictionary value which will override the LOCALE
setting:
# On Unix/Linux DATE_FORMATS = { 'en': ('en_US','%a, %d %b %Y'), 'jp': ('ja_JP','%Y-%m-%d(%a)'), }
# On Windows DATE_FORMATS = { 'en': ('usa','%a, %d %b %Y'), 'jp': ('jpn','%Y-%m-%d(%a)'), }
LOCALE
Change the locale1. A list of locales can be provided here or a single string representing one locale. When providing a list, all the locales will be tried until one works.
You can set locale to further control date format:
- LOCALE = ('usa', 'jpn', # On Windows
'en_US', 'ja_JP' # On Unix/Linux
)
For a list of available locales refer to locales on Windows or on Unix/Linux, use the locale -a
command; see manpage locale(1) for more information.
TEMPLATE_PAGES = None
A mapping containing template pages that will be rendered with the blog entries. See template_pages
.
If you want to generate custom pages besides your blog entries, you can point any Jinja2 template file with a path pointing to the file and the destination path for the generated file.
For instance, if you have a blog with three static pages — a list of books, your resume, and a contact page — you could have:
TEMPLATE_PAGES = {'src/books.html': 'dest/books.html',
'src/resume.html': 'dest/resume.html',
'src/contact.html': 'dest/contact.html'}
DIRECT_TEMPLATES = ['index', 'categories', 'authors', 'archives']
List of templates that are used directly to render content. Typically direct templates are used to generate index pages for collections of content (e.g., tags and category index pages). If the tag and category collections are not needed, set DIRECT_TEMPLATES = ['index', 'archives']
PAGINATED_DIRECT_TEMPLATES = ['index']
Provides the direct templates that should be paginated.
EXTRA_TEMPLATES_PATHS = []
A list of paths you want Jinja2 to search for templates. Can be used to separate templates from the theme. Example: projects, resume, profile ... These templates need to use DIRECT_TEMPLATES
setting.
AUTHOR
Default author (usually your name).
DEFAULT_METADATA = {}
The default metadata you want to use for all articles and pages.
FILENAME_METADATA = '(?P<date>d{4}-d{2}-d{2}).*'
The regexp that will be used to extract any metadata from the filename. All named groups that are matched will be set in the metadata object. The default value will only extract the date from the filename.
For example, to extract both the date and the slug:
FILENAME_METADATA = '(?P<date>\d{4}-\d{2}-\d{2})_(?P<slug>.*)'
See also SLUGIFY_SOURCE
.
PATH_METADATA = ''
Like FILENAME_METADATA
, but parsed from a page's full path relative to the content source directory.
EXTRA_PATH_METADATA = {}
Extra metadata dictionaries keyed by relative path. Relative paths require correct OS-specific directory separators (i.e. / in UNIX and \ in Windows) unlike some other Pelican file settings.
Not all metadata needs to be embedded in source file itself
<internal_metadata>
. For example, blog posts are often named following a YYYY-MM-DD-SLUG.rst
pattern, or nested into YYYY/MM/DD-SLUG
directories. To extract metadata from the filename or path, set FILENAME_METADATA
or PATH_METADATA
to regular expressions that use Python's group name notation (?P<name>…)
. If you want to attach additional metadata but don't want to encode it in the path, you can set EXTRA_PATH_METADATA
:
- EXTRA_PATH_METADATA = {
- 'relative/path/to/file-1': {
'key-1a': 'value-1a', 'key-1b': 'value-1b', },
- 'relative/path/to/file-2': {
'key-2': 'value-2', },
}
This can be a convenient way to shift the installed location of a particular file:
# Take advantage of the following defaults # STATIC_SAVE_AS = '{path}' # STATIC_URL = '{path}' STATIC_PATHS = [ 'static/robots.txt', ] EXTRA_PATH_METADATA = { 'static/robots.txt': {'path': 'robots.txt'}, }
By default, Pelican uses Atom feeds. However, it is also possible to use RSS feeds if you prefer.
Pelican generates category feeds as well as feeds for all your articles. It does not generate feeds for tags by default, but it is possible to do so using the TAG_FEED_ATOM
and TAG_FEED_RSS
settings:
FEED_DOMAIN = None, i.e. base URL is "/"
The domain prepended to feed URLs. Since feed URLs should always be absolute, it is highly recommended to define this (e.g., "http://feeds.example.com"). If you have already explicitly defined SITEURL (see above) and want to use the same domain for your feeds, you can just set: FEED_DOMAIN = SITEURL
.
FEED_ATOM = None, i.e. no Atom feed
Relative URL to output the Atom feed.
FEED_RSS = None, i.e. no RSS
Relative URL to output the RSS feed.
FEED_ALL_ATOM = 'feeds/all.atom.xml'
Relative URL to output the all-posts Atom feed: this feed will contain all posts regardless of their language.
FEED_ALL_RSS = None, i.e. no all-posts RSS
Relative URL to output the all-posts RSS feed: this feed will contain all posts regardless of their language.
CATEGORY_FEED_ATOM = 'feeds/%s.atom.xml'
Where to put the category Atom feeds.2
CATEGORY_FEED_RSS = None, i.e. no RSS
Where to put the category RSS feeds.
AUTHOR_FEED_ATOM = 'feeds/%s.atom.xml'
Where to put the author Atom feeds.3
AUTHOR_FEED_RSS = 'feeds/%s.rss.xml'
Where to put the author RSS feeds.4
TAG_FEED_ATOM = None, i.e. no tag feed
Relative URL to output the tag Atom feed. It should be defined using a "%s" match in the tag name.
TAG_FEED_RSS = None, i.e. no RSS tag feed
Relative URL to output the tag RSS feed
FEED_MAX_ITEMS
Maximum number of items allowed in a feed. Feed item quantity is unrestricted by default.
RSS_FEED_SUMMARY_ONLY = True
Only include item summaries in the description
tag of RSS feeds. If set to False
, the full content will be included instead. This setting doesn't affect Atom feeds, only RSS ones.
If you don't want to generate some or any of these feeds, set the above variables to None
.
If you want to use FeedBurner for your feed, you will likely need to decide upon a unique identifier. For example, if your site were called "Thyme" and hosted on the www.example.com domain, you might use "thymefeeds" as your unique identifier, which we'll use throughout this section for illustrative purposes. In your Pelican settings, set the FEED_ATOM
attribute to thymefeeds/main.xml
to create an Atom feed with an original address of http://www.example.com/thymefeeds/main.xml
. Set the FEED_DOMAIN
attribute to http://feeds.feedburner.com
, or http://feeds.example.com
if you are using a CNAME on your own domain (i.e., FeedBurner's "MyBrand" feature).
There are two fields to configure in the FeedBurner interface: "Original Feed" and "Feed Address". In this example, the "Original Feed" would be http://www.example.com/thymefeeds/main.xml
and the "Feed Address" suffix would be thymefeeds/main.xml
.
The default behaviour of Pelican is to list all the article titles along with a short description on the index page. While this works well for small-to-medium sites, sites with a large quantity of articles will probably benefit from paginating this list.
You can use the following settings to configure the pagination.
DEFAULT_ORPHANS = 0
The minimum number of articles allowed on the last page. Use this when you don't want the last page to only contain a handful of articles.
DEFAULT_PAGINATION = False
The maximum number of articles to include on a page, not including orphans. False to disable pagination.
PAGINATION_PATTERNS
A set of patterns that are used to determine advanced pagination output.
The PAGINATION_PATTERNS
setting can be used to configure where subsequent pages are created. The setting is a sequence of three element tuples, where each tuple consists of:
(minimum page, URL setting, SAVE_AS setting,)
For example, if you wanted the first page to just be /
, and the second (and subsequent) pages to be /page/2/
, you would set PAGINATION_PATTERNS
as follows:
PAGINATION_PATTERNS = (
(1, '{base_name}/', '{base_name}/index.html'),
(2, '{base_name}/page/{number}/', '{base_name}/page/{number}/index.html'),
)
This would cause the first page to be written to {base_name}/index.html
, and subsequent ones would be written into page/{number}
directories.
Pelican offers a way to translate articles. See the Content <content>
section for more information.
DEFAULT_LANG = 'en'
The default language to use.
TRANSLATION_FEED_ATOM = 'feeds/all-%s.atom.xml'
Where to put the Atom feed for translations.5
TRANSLATION_FEED_RSS = None, i.e. no RSS
Where to put the RSS feed for translations.
NEWEST_FIRST_ARCHIVES = True
Order archives by newest first by date. (False: orders by date with older articles first.)
REVERSE_CATEGORY_ORDER = False
Reverse the category order. (True: lists by reverse alphabetical order; default lists alphabetically.)
ARTICLE_ORDER_BY = 'reversed-date'
Defines how the articles (articles_page.object_list
in the template) are sorted. Valid options are: metadata as a string (use reversed-
prefix the reverse the sort order), special option 'basename'
which will use the basename of the file (without path) or a custom function to extract the sorting key from articles. The default value, 'reversed-date'
, will sort articles by date in reverse order (i.e. newest article comes first).
PAGE_ORDER_BY = 'basename'
Defines how the pages (PAGES
variable in the template) are sorted. Options are same as ARTICLE_ORDER_BY
. The default value, 'basename'
will sort pages by their basename.
Creating Pelican themes is addressed in a dedicated section (see theming-pelican
). However, here are the settings that are related to themes.
THEME
Theme to use to produce the output. Can be a relative or absolute path to a theme folder, or the name of a default theme or a theme installed via pelican-themes
(see below).
THEME_STATIC_DIR = 'theme'
Destination directory in the output path where Pelican will place the files collected from THEME_STATIC_PATHS. Default is theme.
THEME_STATIC_PATHS = ['static']
Static theme paths you want to copy. Default value is static, but if your theme has other static paths, you can put them here. If files or directories with the same names are included in the paths defined in this settings, they will be progressively overwritten.
CSS_FILE = 'main.css'
Specify the CSS file you want to load.
By default, two themes are available. You can specify them using the THEME
setting or by passing the -t
option to the pelican
command:
- notmyidea
- simple (a synonym for "plain text" :)
There are a number of other themes available at https://github.com/getpelican/pelican-themes. Pelican comes with pelican-themes
, a small script for managing themes.
You can define your own theme, either by starting from scratch or by duplicating and modifying a pre-existing theme. Here is a guide on how to create your theme <themes>
.
Following are example ways to specify your preferred theme:
# Specify name of a built-in theme
THEME = "notmyidea"
# Specify name of a theme installed via the pelican-themes tool
THEME = "chunk"
# Specify a customized theme, via path relative to the settings file
THEME = "themes/mycustomtheme"
# Specify a customized theme, via absolute path
THEME = "/home/myuser/projects/mysite/themes/mycustomtheme"
The built-in notmyidea
theme can make good use of the following settings. Feel free to use them in your themes as well.
SITESUBTITLE
A subtitle to appear in the header.
DISQUS_SITENAME
Pelican can handle Disqus comments. Specify the Disqus sitename identifier here.
GITHUB_URL
Your GitHub URL (if you have one). It will then use this information to create a GitHub ribbon.
GOOGLE_ANALYTICS
Set to UA-XXXXX-Y
Property's tracking ID to activate Google Analytics.
GA_COOKIE_DOMAIN
Set cookie domain field of Google Analytics tracking code. Defaults to auto
.
GOSQUARED_SITENAME
Set to 'XXX-YYYYYY-X' to activate GoSquared.
MENUITEMS
A list of tuples (Title, URL) for additional menu items to appear at the beginning of the main menu.
PIWIK_URL
URL to your Piwik server - without 'http://' at the beginning.
PIWIK_SSL_URL
If the SSL-URL differs from the normal Piwik-URL you have to include this setting too. (optional)
PIWIK_SITE_ID
ID for the monitored website. You can find the ID in the Piwik admin interface > Settings > Websites.
LINKS
A list of tuples (Title, URL) for links to appear on the header.
SOCIAL
A list of tuples (Title, URL) to appear in the "social" section.
TWITTER_USERNAME
Allows for adding a button to articles to encourage others to tweet about them. Add your Twitter username if you want this button to appear.
LINKS_WIDGET_NAME
Allows override of the name of the links widget. If not specified, defaults to "links".
SOCIAL_WIDGET_NAME
Allows override of the name of the "social" widget. If not specified, defaults to "social".
In addition, you can use the "wide" version of the notmyidea
theme by adding the following to your configuration:
CSS_FILE = "wide.css"
Sometimes, a long list of warnings may appear during site generation. Finding the meaningful error message in the middle of tons of annoying log output can be quite tricky. In order to filter out redundant log messages, Pelican comes with the LOG_FILTER
setting.
LOG_FILTER
should be a list of tuples (level, msg)
, each of them being composed of the logging level (up to warning
) and the message to be ignored. Simply populate the list with the log messages you want to hide, and they will be filtered out.
For example:
[(logging.WARN, 'TAG_SAVE_AS is set to False')]
It is possible to filter out messages by a template. Check out source code to obtain a template.
For example:
[(logging.WARN, 'Empty alt attribute for image %s in %s')]
Warning
Silencing messages by templates is a dangerous feature. It is possible to unintentionally filter out multiple message types with the same template (including messages from future Pelican versions). Proceed with caution.
Note
This option does nothing if --debug
is passed.
To speed up the build process, Pelican can optionally read only articles and pages with modified content.
When Pelican is about to read some content source file:
- The hash or modification time information for the file from a previous build are loaded from a cache file if
LOAD_CONTENT_CACHE
isTrue
. These files are stored in theCACHE_PATH
directory. If the file has no record in the cache file, it is read as usual. The file is checked according to
CHECK_MODIFIED_METHOD
:- If set to
'mtime'
, the modification time of the file is checked. - If set to a name of a function provided by the
hashlib
module, e.g.'md5'
, the file hash is checked. - If set to anything else or the necessary information about the file cannot be found in the cache file, the content is read as usual.
- If set to
- If the file is considered unchanged, the content data saved in a previous build corresponding to the file is loaded from the cache, and the file is not read.
- If the file is considered changed, the file is read and the new modification information and the content data are saved to the cache if
CACHE_CONTENT
isTrue
.
If CONTENT_CACHING_LAYER
is set to 'reader'
(the default), the raw content and metadata returned by a reader are cached. If this setting is instead set to 'generator'
, the processed content object is cached. Caching the processed content object may conflict with plugins (as some reading related signals may be skipped) and the WITH_FUTURE_DATES
functionality (as the draft
status of the cached content objects would not change automatically over time).
Checking modification times is faster than comparing file hashes, but it is not as reliable because mtime
information can be lost, e.g., when copying content source files using the cp
or rsync
commands without the mtime
preservation mode (which for rsync
can be invoked by passing the --archive
flag).
The cache files are Python pickles, so they may not be readable by different versions of Python as the pickle format often changes. If such an error is encountered, it is caught and the cache file is rebuilt automatically in the new format. The cache files will also be rebuilt after the GZIP_CACHE
setting has been changed.
The --ignore-cache
command-line option is useful when the whole cache needs to be regenerated, such as when making modifications to the settings file that will affect the cached content, or just for debugging purposes. When Pelican runs in autoreload mode, modification of the settings file will make it ignore the cache automatically if AUTORELOAD_IGNORE_CACHE
is True
.
Note that even when using cached content, all output is always written, so the modification times of the generated *.html
files will always change. Therefore, rsync
-based uploading may benefit from the --checksum
option.
When only working on a single article or page, or making tweaks to your theme, it is often desirable to generate and review your work as quickly as possible. In such cases, generating and writing the entire site output is often unnecessary. By specifying only the desired files as output paths in the WRITE_SELECTED
list, only those files will be written. This list can be also specified on the command line using the --write-selected
option, which accepts a comma-separated list of output file paths. By default this list is empty, so all output is written. See site_generation
for more details.
../samples/pelican.conf.py