Merge pull request #96 from waveform80/pwm-toggle-motor-reverse

Fix #91

gpiozero/boards.py

@@ -360,6 +360,16 @@ def right(self, speed=1):
         self._left.forward(speed)
         self._right.backward(speed)
 
+    def reverse(self):
+        """
+        Reverse the robot's current motor directions. If the robot is currently
+        running full speed forward, it will run full speed backward. If the
+        roboto is turning left at half-speed, it will turn right at half-speed.
+        If the robot is currently stopped it will remain stopped.
+        """
+        self._left.value = -self._left.value
+        self._right.value = -self._right.value
+
     def stop(self):
         """
         Stop the robot.

gpiozero/output_devices.py

@@ -255,6 +255,15 @@ def value(self, value):
         self._stop_blink()
         self._write(value)
 
+    def toggle(self):
+        """
+        Toggle the state of the device. If the device is currently off
+        (`value` is 0.0), this changes it to "fully" on (`value` is 1.0).  If
+        the device has a duty cycle (`value`) of 0.1, this will toggle it to
+        0.9, and so on.
+        """
+        self.value = 1.0 - self.value
+
     @property
     def is_active(self):
         """
@@ -414,6 +423,14 @@ def backward(self, speed=1):
         self._forward.off()
         self._backward.value = speed
 
+    def reverse(self):
+        """
+        Reverse the current direction of the motor. If the motor is currently
+        idle this does nothing. Otherwise, the motor's direction will be
+        reversed at the current speed.
+        """
+        self.value = -self.value
+
     def stop(self):
         """
         Stop the motor