ath10k-ct: Add 5.10 kernel driver.

5.10 is not yet tested beyound compiling....

Signed-off-by: Ben Greear <greearb@candelatech.com>

ath10k-5.10/Kconfig

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: ISC
+config ATH10K
+	tristate "Atheros 802.11ac wireless cards support"
+	depends on MAC80211 && HAS_DMA
+	select ATH_COMMON
+	select CRC32
+	select WANT_DEV_COREDUMP
+	select ATH10K_CE
+	help
+	  This module adds support for wireless adapters based on
+	  Atheros IEEE 802.11ac family of chipsets.
+
+	  If you choose to build a module, it'll be called ath10k.
+
+config ATH10K_CE
+	bool
+
+config ATH10K_PCI
+	tristate "Atheros ath10k PCI support"
+	depends on ATH10K && PCI
+	help
+	  This module adds support for PCIE bus
+
+config ATH10K_AHB
+	bool "Atheros ath10k AHB support"
+	depends on ATH10K_PCI && OF && RESET_CONTROLLER
+	help
+	  This module adds support for AHB bus
+
+config ATH10K_SDIO
+	tristate "Atheros ath10k SDIO support"
+	depends on ATH10K && MMC
+	help
+	  This module adds support for SDIO/MMC bus.
+
+config ATH10K_USB
+	tristate "Atheros ath10k USB support (EXPERIMENTAL)"
+	depends on ATH10K && USB
+	help
+	  This module adds experimental support for USB bus. Currently
+	  work in progress and will not fully work.
+
+config ATH10K_SNOC
+	tristate "Qualcomm ath10k SNOC support"
+	depends on ATH10K
+	depends on ARCH_QCOM || COMPILE_TEST
+	select QCOM_QMI_HELPERS
+	help
+	  This module adds support for integrated WCN3990 chip connected
+	  to system NOC(SNOC).
+
+config ATH10K_DEBUG
+	bool "Atheros ath10k debugging"
+	depends on ATH10K
+	help
+	  Enables debug support
+
+	  If unsure, say Y to make it easier to debug problems.
+
+config ATH10K_DEBUGFS
+	bool "Atheros ath10k debugfs support"
+	depends on ATH10K && DEBUG_FS
+	help
+	  Enabled debugfs support
+
+	  If unsure, say Y to make it easier to debug problems.
+
+config ATH10K_SPECTRAL
+	bool "Atheros ath10k spectral scan support"
+	depends on ATH10K_DEBUGFS
+	select RELAY
+	default n
+	help
+	  Say Y to enable access to the FFT/spectral data via debugfs.
+
+config ATH10K_TRACING
+	bool "Atheros ath10k tracing support"
+	depends on ATH10K
+	depends on EVENT_TRACING
+	help
+	  Select this to ath10k use tracing infrastructure.
+
+config ATH10K_DFS_CERTIFIED
+	bool "Atheros DFS support for certified platforms"
+	depends on ATH10K && CFG80211_CERTIFICATION_ONUS
+	default n
+	help
+	This option enables DFS support for initiating radiation on
+	ath10k.

ath10k-5.10/Makefile

@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: ISC
+obj-$(CONFIG_ATH10K) += ath10k_core.o
+ath10k_core-y += mac.o \
+		 debug.o \
+		 core.o \
+		 coredump.o \
+		 htc.o \
+		 htt.o \
+		 htt_rx.o \
+		 htt_tx.o \
+		 txrx.o \
+		 wmi.o \
+		 wmi-tlv.o \
+		 bmi.o \
+		 hw.o \
+		 p2p.o \
+		 swap.o
+
+ath10k_core-$(CONFIG_ATH10K_SPECTRAL) += spectral.o
+ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
+ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
+ath10k_core-$(CONFIG_THERMAL) += thermal.o
+ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
+ath10k_core-$(CONFIG_PM) += wow.o
+ath10k_core-$(CONFIG_ATH10K_CE) += ce.o
+
+obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
+ath10k_pci-y += pci.o
+
+ath10k_pci-$(CONFIG_ATH10K_AHB) += ahb.o
+
+obj-$(CONFIG_ATH10K_SDIO) += ath10k_sdio.o
+ath10k_sdio-y += sdio.o
+
+obj-$(CONFIG_ATH10K_USB) += ath10k_usb.o
+ath10k_usb-y += usb.o
+
+obj-$(CONFIG_ATH10K_SNOC) += ath10k_snoc.o
+ath10k_snoc-y += qmi.o \
+		 qmi_wlfw_v01.o \
+		 snoc.o
+
+# for tracing framework to find trace.h
+CFLAGS_trace.o := -I$(src)