improve description of number of parts to print

gregsaun · Aug 22, 2018 · a7beaad · a7beaad
1 parent 0d44ed0
commit a7beaad
Show file tree

Hide file tree

Showing 8 changed files with 20 additions and 20 deletions.
diff --git a/full_upgrade/for_mk2.5/manual/bom.md b/full_upgrade/for_mk2.5/manual/bom.md
@@ -33,7 +33,7 @@
 | Part     | Quantity |
 |----------|:--------:|
 | build_helper_96mm      | 1 |
-| end_caps               | 2 |
+| end_caps               | 2 (total of 4 parts) |
 | end_cap_z_axis         | 2 |
 | foot                   | 4 |
 | lcd_support_a          | 1 |
@@ -48,8 +48,8 @@
 | y_idler                | 1 |
 | y_motor_mount          | 1 |
 | z_motor_mount_front    | 2 |
-| z_motor_mounts         | 1 |
-| z_tops                 | 1 |
+| z_motor_mounts         | 1 (total of 2 parts) |
+| z_tops                 | 1 (total of 2 parts) |
 | cable_clip_lcd         | 6 |
 | cable_clip_round       | 5 |
 | cable_clip_ziptie      | 3 |
diff --git a/full_upgrade/for_mk2.5/manual/print_settings.md b/full_upgrade/for_mk2.5/manual/print_settings.md
@@ -19,7 +19,7 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | Part | Quantity | Layer Height | Infill | Perimeters | Top/Bottom Layers |
 |:-----|:--------:|:------------:|:------:|:----------:|:-----------------:|
 | build_helper_96mm      | 1 | 0.20mm | 20% | 2 | 5 |
-| end_caps               | 2 | 0.20mm | 20% | 4 | 5 |
+| end_caps               | 2 (total of 4 parts) | 0.20mm | 20% | 4 | 5 |
 | end_cap_z_axis         | 2 | 0.20mm | 20% | 3 | 5 |
 | foot                   | 4 | 0.20mm | 30% | 3 | 5 |
 | lcd_support_a          | 1 | 0.20mm | 20% | 3 | 5 |
@@ -34,8 +34,8 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | y_idler                | 1 | 0.20mm | 30% | 3 | 5 |
 | y_motor_mount          | 1 | 0.20mm | 30% | 3 | 5 |
 | z_motor_mount_front    | 2 | 0.20mm | 30% | 3 | 5 |
-| z_motor_mounts         | 1 | 0.20mm | 30% | 3 | 5 |
-| z_tops                 | 1 | 0.20mm | 30% | 3 | 5 |
+| z_motor_mounts         | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
+| z_tops                 | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
 | cable_clip_lcd         | 6 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_round       | 5 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_ziptie      | 3 | 0.15mm | 30% | 3 | 5 |

diff --git a/full_upgrade/for_mk2_mk2s/manual/bom.md b/full_upgrade/for_mk2_mk2s/manual/bom.md
@@ -33,7 +33,7 @@
 | Part     | Quantity |
 |----------|:--------:|
 | build_helper_96mm      | 1 |
-| end_caps               | 2 |
+| end_caps               | 2 (total of 4 parts) |
 | end_cap_z_axis         | 2 |
 | foot                   | 4 |
 | lcd_support_a          | 1 |
@@ -48,8 +48,8 @@
 | y_idler                | 1 |
 | y_motor_mount          | 1 |
 | z_motor_mount_front    | 2 |
-| z_motor_mounts         | 1 |
-| z_tops                 | 1 |
+| z_motor_mounts         | 1 (total of 2 parts) |
+| z_tops                 | 1 (total of 2 parts) |
 | cable_clip_lcd         | 6 |
 | cable_clip_round       | 5 |
 | cable_clip_ziptie      | 3 |
diff --git a/full_upgrade/for_mk2_mk2s/manual/print_settings.md b/full_upgrade/for_mk2_mk2s/manual/print_settings.md
@@ -19,7 +19,7 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | Part | Quantity | Layer Height | Infill | Perimeters | Top/Bottom Layers |
 |:-----|:--------:|:------------:|:------:|:----------:|:-----------------:|
 | build_helper_96mm      | 1 | 0.20mm | 20% | 2 | 5 |
-| end_caps               | 2 | 0.20mm | 20% | 4 | 5 |
+| end_caps               | 2 (total of 4 parts) | 0.20mm | 20% | 4 | 5 |
 | end_cap_z_axis         | 2 | 0.20mm | 20% | 3 | 5 |
 | foot                   | 4 | 0.20mm | 30% | 3 | 5 |
 | lcd_support_a          | 1 | 0.20mm | 20% | 3 | 5 |
@@ -34,8 +34,8 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | y_idler                | 1 | 0.20mm | 30% | 3 | 5 |
 | y_motor_mount          | 1 | 0.20mm | 30% | 3 | 5 |
 | z_motor_mount_front    | 2 | 0.20mm | 30% | 3 | 5 |
-| z_motor_mounts         | 1 | 0.20mm | 30% | 3 | 5 |
-| z_tops                 | 1 | 0.20mm | 30% | 3 | 5 |
+| z_motor_mounts         | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
+| z_tops                 | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
 | cable_clip_lcd         | 6 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_round       | 5 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_ziptie      | 3 | 0.15mm | 30% | 3 | 5 |

diff --git a/full_upgrade/for_mk3/manual/bom.md b/full_upgrade/for_mk3/manual/bom.md
@@ -33,7 +33,7 @@
 | Part     | Quantity |
 |----------|:------:|
 | build_helper_106mm     | 1 |
-| end_caps               | 2 |
+| end_caps               | 2 (total of 4 parts)  |
 | end_cap_z_axis         | 2 |
 | foot                   | 4 |
 | lcd_support_a          | 1 |
@@ -48,8 +48,8 @@
 | y_idler                | 1 |
 | y_motor_mount          | 1 |
 | z_motor_mount_front    | 2 |
-| z_motor_mounts         | 1 |
-| z_tops                 | 1 |
+| z_motor_mounts         | 1 (total of 2 parts) |
+| z_tops                 | 1 (total of 2 parts) |
 | cable_clip_lcd         | 6 |
 | cable_clip_round       | 5 |
 | cable_clip_ziptie      | 3 |
diff --git a/full_upgrade/for_mk3/manual/print_settings.md b/full_upgrade/for_mk3/manual/print_settings.md
@@ -19,7 +19,7 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | Part | Quantity | Layer Height | Infill | Perimeters | Top/Bottom Layers |
 |:-----|:--------:|:------------:|:------:|:----------:|:-----------------:|
 | build_helper_106mm     | 1 | 0.20mm | 20% | 2 | 5 |
-| end_cap                | 2 | 0.20mm | 20% | 4 | 5 |
+| end_cap                | 2 (total of 4 parts) | 0.20mm | 20% | 4 | 5 |
 | end_cap_z_axis         | 2 | 0.20mm | 20% | 3 | 5 |
 | foot                   | 4 | 0.20mm | 30% | 3 | 5 |
 | lcd_support_a          | 1 | 0.20mm | 20% | 3 | 5 |
@@ -34,8 +34,8 @@ To ensure your prints are good, be sure to have a very well calibrated machine a
 | y_idler                | 1 | 0.20mm | 30% | 3 | 5 |
 | y_motor_mount          | 1 | 0.20mm | 30% | 3 | 5 |
 | z_motor_mount_front    | 2 | 0.20mm | 30% | 3 | 5 |
-| z_motor_mounts         | 1 | 0.20mm | 30% | 3 | 5 |
-| z_tops                 | 1 | 0.20mm | 30% | 3 | 5 |
+| z_motor_mounts         | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
+| z_tops                 | 1 (total of 2 parts) | 0.20mm | 30% | 3 | 5 |
 | cable_clip_lcd         | 6 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_round       | 5 | 0.15mm | 30% | 3 | 5 |
 | cable_clip_ziptie      | 3 | 0.15mm | 30% | 3 | 5 |

diff --git a/half_upgrade/manual/bom.md b/half_upgrade/manual/bom.md
@@ -44,7 +44,7 @@
 | psu_upper_mount   | 2 |
 | lcd_support_a     | 1 |
 | lcd_support_b     | 1 |
-| end_caps          | 2 |
+| end_caps          | 2 (total of 4 parts) |
 | foot              | 4 |
 | cable_clip_lcd    | 7 |
 | cable_clip_ziptie | 4 |
diff --git a/half_upgrade/manual/print_settings.md b/half_upgrade/manual/print_settings.md
@@ -22,7 +22,7 @@ All those parts are optimized for PETG. If you print in ABS you might end up wit
 | y_motor_mount     | 1 | 0.20mm | 30% | 3 | 5 | Recommended |
 | lcd_support_a     | 1 | 0.20mm | 20% | 3 | 5 | No |
 | lcd_support_b     | 1 | 0.20mm | 20% | 3 | 5 | No |
-| end_caps          | 2 | 0.20mm | 20% | 4 | 5 | No |
+| end_caps          | 2 (total of 2 parts) | 0.20mm | 20% | 4 | 5 | No |
 | foot              | 4 | 0.20mm | 30% | 3 | 5 | No |
 | cable_clip_lcd    | 7 | 0.15mm | 30% | 3 | 5 | No |
 | cable_clip_ziptie | 4 | 0.15mm | 30% | 3 | 5 | No |