live-snapshot.de.1

.\"*******************************************************************
.\"
.\" This file was generated with po4a. Translate the source file.
.\"
.\"*******************************************************************
.TH LIVE\-BOOT 1 24.12.2010 2.0.14 "Debian Live Projekt"

.SH NAME
\fBlive\-snapshot\fP \- simple script to ease persistence usage

.SH SYNTAX
\fBlive\-snapshot\fP [\-c|\-\-cow \fIDIRECTORY] [\-d|\-\-device DEVICE\fP]
[\-e|\-\-exclude\-list \fIFILE\fP] [\-o|\-\-output \fIFILE\fP] [\-t|\-\-type \fITYPE\fP]
.br
\fBlive\-snapshot\fP [\-r|\-\-resync\-string STRING]
.br
\fBlive\-snapshot\fP [\-h|\-\-help]
.br
\fBlive\-snapshot\fP [\-u|\-\-usage]
.br
\fBlive\-snapshot\fP [\-v|\-\-version]

.SH BESCHREIBUNG
live\-snapshot is a script which can be used to build the right types of
persistent image files supported by \fIlive\-boot\fP(7). It is also used on exit
by the live\-boot init script to resync the boot\-found snapshots devices.

.SH OPTIONEN
.IP "\-c, \-\-cow \fIDIRECTORY\fP" 4
specifies the input directory to be cloned in the image file. Its default
value "/live/cow" should be right for most uses. However it could be handy
to specify "/home" and type ext2 for the type to prepare an image file
suited to be directly mounted by live\-boot as home.
.IP "\-d, \-\-device \fIDEVICE\fP" 4
sets the device where the media which the snapshot/persistence
file/partition will be put. If it is not specified, a tmpfs will be used and
linked to the user's desktop to move it where it is needed. If the device
has no filesystem, an ext2 fs will be automatically created and labelled
according to the values specified after the "\-\-output" value or with a sane
default.
.IP "\-e, \-\-exclude\-list \fIFILE\fP" 4
a file containing a list of filenames/paths that should not be saved. This
exclude list will be remebered on the target snapshot media for reuse.
.IP "\-o, \-\-output \fIFILE\fP" 4
the filename/label used for the output file/partition. If left blank,
live\-snapshot will search for a proper file on the device or use the whole
partition.
.IP "\-r, \-\-resync\-string \fISTRING\fP" 4
internally used on resyncs.
.IP "\-f, \-\-refresh" 4
try to do the same operation that should be done at reboot or halt,
resyncing boot\-time auto discovered snapshots. Useful to prevent a crash or
surge power\-off.
.IP "\-t, \-\-type \fITYPE\fP" 4
Type could be one of "cpio", "squashfs", "ext2", "ext3", "ext4", or "jffs2".
.IP "\-h, \-\-help" 4
display help and exit.
.IP "\-u, \-\-usage" 4
show usage and exit.
.IP "\-v, \-\-version" 4
output version information and exit.

.SH DATEIEN
.IP \fB/etc/live.conf\fP 4
Some variables can be configured via this config file (inside the live
system).
.IP \fBlive/filesystem.module\fP 4
This optional file (inside the live media) contains a list of white\-space or
carriage\-return\-separated file names corresponding to disk images in the
"/live" directory. If this file exists, only images listed here will be
merged into the root aufs, and they will be loaded in the order listed
here. The first entry in this file will be the "lowest" point in the aufs,
and the last file in this list will be on the "top" of the aufs, directly
below /cow.  Without this file, any images in the "/live" directory are
loaded in alphanumeric order.
.IP \fB/etc/live\-persistence.binds\fP 4
This optional file (which resides in the rootfs system, not in the live
media) is used as a list of directories which not need be persistent:
ie. their content does not need to survive reboots when using the
persistence features.
.br
This saves expensive writes and speeds up operations on volatile data such
as web caches and temporary files (like e.g. /tmp and .mozilla) which are
regenerated each time. This is achieved by bind mounting each listed
directory with a tmpfs on the original path.
.IP \fB/etc/live\-snapshot.list\fP 4
This optional file, if present changes the behaviour of live\-snapshot: only
files and directories listed there are included (integrally) in the
snapshot. Beware, it is an experimental feature that only works for cpio
targets now.

.SH "SIEHE AUCH"
\fIlive\-boot\fP(1)
.PP
\fIlive\-build\fP(7)
.PP
\fIlive\-config\fP(7)

.SH HOMEPAGE
Weitere Informationen ueber live\-boot und das Debian Live Projekt koennen
auf der Homepage unter <\fIhttp://live.debian.net/\fP> und im Handbuch
unter <\fIhttp://live.debian.net/manual/\fP> gefunden werden.

.SH FEHLER
Fehler koennen durch Einreichen eines Fehlerberichtes fuer das live\-boot
Paket im Debian Bug Tracking System unter
<\fIhttp://bugs.debian.org/\fP> oder durch Senden einer E\-Mail an die
Debian Live Mailing Liste unter <\fIdebian\-live@lists.debian.org\fP>
(englischsprachig) mitgeteilt werden.

.SH AUTOR
live\-boot wurde von Daniel Baumann <\fIdaniel@debian.org\fP> fuer das
Debian Projekt geschrieben.