Camera shutter stuck and no capture of raw thermal image (Rpi3b + Purethermal I/O 2)

[basavarajamogi]

I am working on raspberry pi 3b and purethermal 2 input output board. I just need to capture the raw thermal image and save it using python. While I tried to use purethermal1-uvc-capture, it streams the video. And also the camera shutter get stuck many time. When I reset the camera it again restarts. If anyone has any examples and documentation to refer, Please let me know.

[newts]

Probably damaged shutter. Depending on how you mount it the shutter is very delicate and I have seen them damaged. In my case it was stuck open so the calibrations failed. Try replacing with a new camera and see if the problem goes away.

[basavarajamogi]

Thank you Jonathan, and how about a simple raw image capture using Purethermal 2 board?

…

On Sat, 23 Jan 2021, 06:39 Johnathan Vail, ***@***.***> wrote: Probably damaged shutter. Depending on how you mount it the shutter is very delicate and I have seen them damaged. In my case it was stuck open so the calibrations failed. Try replacing with a new camera and see if the problem goes away. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#45 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AIO2GTVW4WEWADG4ODQADTLS3LNSZANCNFSM4WPG3N5A> .

[newts]

I am not familiar with that board but the shutter issue is a problem with the FLIR module itself.