meta-rpi3
=========

This layer file contains information on the contents of the
rpi3 layer for Raspberry Pi 3 B devices and official 7" touchscreen


Dependencies
============

This layer depends on:

  URI: git://git.yoctoproject.org/poky.git
  URI: git://git.openembedded.org/meta-openembedded
  URI: git://git.yoctoproject.org/meta-raspberrypi
  URI: git://git.yoctoproject.org/meta-qt5

  
Patches
=======

Please submit any patches against the rpi3 layer to the maintainer.

Maintainer: Sandeep Gundlupet Raju <grsandeep85@gmail.com>

Table of Contents
=================

  I. Adding the rpi3 layer to your build
 II. Build Instructions


I. Adding the rpi3 layer to your build
======================================

In order to use this layer, you need to make the build system has 
following layers

BBLAYERS ?= " \
    <path-to-layer>/poky/meta \
    <path-to-layer>/poky/meta-poky \
    <path-to-layer>/meta-openembedded/meta-oe \
    <path-to-layer>/meta-openembedded/meta-multimedia \
    <path-to-layer>/meta-openembedded/meta-networking \
    <path-to-layer>/meta-openembedded/meta-python \
    <path-to-layer>/meta-qt5 \
    <path-to-layer>/meta-raspberrypi \
    <path-to-layer>/meta-rpi3 \
  "

II. Build Instructions
======================

1. Initialize a build using the 'oe-init-build-env' script in openembedded
$ source <path-to-layer>/poky/oe-init-build-env

2. Copy the bblayers configuration to build
$ cp <path-to-layer>/meta-rpi3/conf/bblayers.conf.sample build/conf/bblayers.conf

3. Copy the local configuration configuration to build
$ cp <path-to-layer>/meta-rpi3/conf/local.conf.sample build/conf/local.conf 

4. Build the Qt image
$ bitbake core-image-qt5

5. Prepare the SD card image. sdX is the sd card partition disk label
$ sudo dd if=tmp/deploy/images/raspberrypi3/core-image-qt5-raspberrypi3.rpi-sdimg of=/dev/sdX