Slight default parameter changes to make a better "uncalibrated" mode…

…l for sagehen example. (bit more ET, smaller tmin_lapse)

examples/sagehen/hru_params/prms_parameters.csv

@@ -24,7 +24,7 @@ fastcoef_lin,calibration_parameters,one,2,0.1,,,,,,,,,,,,,,,,,,,,,
 fastcoef_sq,calibration_parameters,one,2,0.8,,,,,,,,,,,,,,,,,,,,,
 freeh2o_cap,default_values,one,2,0.05,,,,,,,,,,,,,,,,,,,,,
 gwflow_coef,calibration_parameters,one,2,0.014,,,,,,,,,,,,,,,,,,,,,
-gwsink_coef,default_values,one,2,0,,,,,,,,,,,,,,,,,,,,,
+gwsink_coef,default_values,one,2,0.01,,,,,,,,,,,,,,,,,,,,,
 gwstor_init,default_values,one,2,2,,,,,,,,,,,,,,,,,,,,,
 gwstor_min,default_values,one,2,0,,,,,,,,,,,,,,,,,,,,,
 gw_up_id,cascade,ncascdgw,1,crt_file,,,,,,,,,,,,,,,,,,,,,
@@ -49,7 +49,7 @@ hru_tsta,calibration_parameters,nhru,1,config_file,,,,,,,,,,,,,,,,,,,,,
 hru_type,gis_derived_parameters,nhru,1,HRU_TYPE,,,,,,,,,,,,,,,,,,,,,
 hru_up_id,cascade,ncascade,1,crt_file,,,,,,,,,,,,,,,,,,,,,
 imperv_stor_max,default_values,one,2,0.05,,,,,,,,,,,,,,,,,,,,,
-jh_coef,calibration_parameters,nmonths,2,0.016301,0.016301,0.016301,0.016301,0.011559,0.011559,0.010966,0.010225,0.00904,0.009633,0.014819,0.014819,,,,,,,,,,
+jh_coef,calibration_parameters,nmonths,2,0.02200635,0.02200635,0.02200635,0.02200635,0.01560465,0.01560465,0.0148041,0.01380375,0.012204,0.01300455,0.02000565,0.02000565,,,,,,,,,,
 jh_coef_hru,gis_derived_parameters,nhru,2,JH_COEF,,,,,,,,,,,,,,,,,,,,,
 lake_hru_id,gis_derived_parameters,nhru,1,LAKE_ID,,,,,,,,,,,,,,,,,,,,,
 mapvars_freq,default_values,one,1,1,,,,,,,,,,,,,,,,,,,,,

examples/sagehen/sagehen_parameters.ini

@@ -188,7 +188,7 @@ tsta_elev = 6340
 
 # If using temp_1sta module, manually define monthly lapse rates
 tmax_lapse = 9, 9, 7, 7, 6, 5, 5, 4, 6, 7, 8, 9
-tmin_lapse = 9, 9, 7, 7, 6, 5, 5, 4, 6, 7, 8, 9
+tmin_lapse = 4.5, 4.5, 3.5, 3.5, 3, 2.5, 2.5, 2, 3, 3.5, 4, 4.5
 
 
 ## Miscellaneous