Skip to content

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

USB OTG Doesn't power HL_PANv2... solved. #25

Closed
gtxaspec opened this issue Apr 30, 2022 · 3 comments
Closed

USB OTG Doesn't power HL_PANv2... solved. #25

gtxaspec opened this issue Apr 30, 2022 · 3 comments
Labels
documentation Improvements or additions to documentation

Comments

@gtxaspec
Copy link
Owner

gtxaspec commented Apr 30, 2022 •
edited
Loading

Curiously, using a USB OTG adapter or micro usb hub, doesn't power the PanV2 at all.

Inspecting the unit inside, the connector has 5 wires coming from the base to the board. if the ID pin is shorted for OTG, could this be preventing the camera from booting?
@gtxaspec
Copy link
Owner Author

gtxaspec commented May 1, 2022 •
edited
Loading

Looks like I was right! Removing the ID pin does allow the USB OTG cable / adapter / hub to power the device. The USB devices work too!

If you have a PANv2 and you want to use USB OTG, for HUB, flash drive, ethernet adapter or whatever, see the attached photos.

Pop open the camera, then facing the T31 processor, you need to remove the 2nd red cable from the connector, I removed the pin and used heat shrink tubing, or go the easy way and cut it and tape the ends off without removing the connector.

It is not needed for normal operation anyway.

this will void your warranty!

@gtxaspec
Copy link
Owner Author

gtxaspec commented May 1, 2022 •
edited
Loading

img2
img1

@gtxaspec gtxaspec added the documentation Improvements or additions to documentation label May 1, 2022
@gtxaspec gtxaspec changed the title USB OTG Doesn't power HL_PANv2 USB OTG Doesn't power HL_PANv2...solved. May 1, 2022
@gtxaspec gtxaspec changed the title USB OTG Doesn't power HL_PANv2...solved. USB OTG Doesn't power HL_PANv2... solved. May 1, 2022
@capncybo
Copy link

capncybo commented May 1, 2022 •
edited
Loading

Thank you for sharing this information, this makes me really want to purchase one.

@gtxaspec gtxaspec pinned this issue May 7, 2022
@gtxaspec gtxaspec closed this as completed May 7, 2022
@gtxaspec gtxaspec unpinned this issue Jul 14, 2022
Repository owner locked and limited conversation to collaborators Jul 15, 2022
@gtxaspec gtxaspec converted this issue into discussion #189 Jul 15, 2022

This issue was moved to a discussion.

You can continue the conversation there. Go to discussion →

Assignees
No one assigned
Labels
documentation Improvements or additions to documentation
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@gtxaspec @capncybo