Arduino/SteamVR motion capture gloves. Check out more of my free motion capture tools and apps at www.MocapFusion.com
Files for assembling and programming these super low latency "DIY" motion capture glove using an Arduino and 5x SEN-08606 Flex Sensor 4.5" for each finger and a Vive tracker that is strapped to the 3D printed hand strap.
Parts:
nRF24 wireless radio (RP-SMA): https://www.sparkfun.com/products/705
nRF24 wireless radio: https://www.sparkfun.com/products/691
SEN-08606 Flex Sensor: https://www.sparkfun.com/products/8606
Knit Gloves: https://www.amazon.com/OPT-Brand-Winter-Gloves-Wholesale/dp/B07XZL1ZK8
Dynaflex (black): https://www.amazon.com/18280-DYNAFLEX-Black-Building-Material/dp/B000BQWXEO
Boneduino with nRF24 raido: http://duinopeak.com/index.php?route=product/product&manufacturer_id=9&product_id=30
Wiring Diagrams:
Example #1 requires only a single Arduino Mega and is wired directly to the mocap PC through USB.
Example #2 Uses a Arduino Mega for for the gloves and sends the finger data wirelessly to a receiving Arduion Uno connected to the mocap PC through USB.
Example #3 two Arduino Unos or Boneduinos connected to each glove individually, both send the finger data wirelessly to a receiving Arduino Uno connected to the mocap PC through USB.