DingTalk bot is a robot that post information to DingTalk group.
Documents of DingTalk API is available here.
This project is under construction. There is only a rough run through. Code is constructed and tested under python 3. I will also try to adapt it with python 2 later when we really have something running.
MAKE SURE YOU UNDERSTAND THE DOCUMENTS ABOVE AND CODES PROVIDED IN THIS REPOSITORY, AND TRY IT AT YOUR OWN RISK!
To try it, there are several steps:
-
Add Custom robot: DingTalk - Group - Group Setting - Group Robot - Add Robot - Custom - Add. Name it and give it a profile photo. Make sure you will not scare other members in the group during testing (and usage).
-
Get the
webhood: Again go to Group Robot, in the list of Robot for this group, you should see the robot you just added. The...button on the right-side will lead you to the Settings page. You can update the settings for your robot. And more importantly, copy yourwebhoodhere. -
Setup: Back to your workspace, copy the
config_sample.pyasconfig.pyand create your config with yourwebhood.WebhookConfig,BaseAuthConfig, orEnvironConfig, either way would do. -
Run: You are ready to set off.
python3 -m dtb
... and see? You just received a new message from the bot! It should read
时代的火车向前开
这个即将发布的新版本，创始人 ...
This is taken from example in official documnet.
Take a look at dtb/__main__.py, and you can play with it now.
Do not use the DingTalk SDK python for the bot, because the functionality is not included in current release at all.
get_dingtal_sdk.sh is a script to fetch the SDK.
However, it is not used in this project.
I provide it here just because I did spend some minutes to write it.