Pandoc does support citation locators, manubot not

It *does* support them, but they are not shown with the default CSL: manubot/rootstock#362 (comment)

content/04.materials.methods.md

@@ -11,11 +11,11 @@ Afterwards, the teeth were placed for one hour in a 3% hydrogen peroxide ultraso
 
 ### Micro-CT-based morphological analysis
 
-The 104 samples were imaged on a [Bruker SkyScan 1272 @https://www.bruker.com/products/microtomography/micro-ct-for-sample-scanning/skyscan-1272/overview.html] high-resolution micro-CT machine (Control software version 1.1.19, [Bruker microCT](https://bruker-microct.com/), Kontich, Belgium).
+The 104 samples were imaged on a [Bruker SkyScan 1272](https://www.bruker.com/products/microtomography/micro-ct-for-sample-scanning/skyscan-1272/overview.html) high-resolution micro-CT machine (Control software version 1.1.19, [Bruker microCT](https://www.bruker.com/products/microtomography.html), Kontich, Belgium).
 To facilitate the scanning of this large batch of samples, we used the automatic sample changer to enable us to scan batches of 16 teeth without any intervention.
 In addition to the sample changer, the machine is equipped with a Hamamatsu L11871\_20 X-ray source and a XIMEA xiRAY16 camera.
 We used a custom-made sample-holder to scan the teeth on the sample changer.
-The sample holder was 3D-printed on a [Form 2 @https://formlabs.com/3d-printers/form-2/] desktop stereolithography printer ([Formlabs](https://formlabs.com/), Somerville, Massachusetts, USA) and is freely available online (https://git.io/JJbAZ) as part of a library of sample holders [@doi:10.5281/zenodo.2587555.].
+The sample holder was 3D-printed on a [Form 2](https://formlabs.com/3d-printers/form-2/) desktop stereolithography printer ([Formlabs](https://formlabs.com/), Somerville, Massachusetts, USA) and is freely available online (https://git.io/JJbAZ) as part of a library of sample holders [@doi:10.5281/zenodo.2587555.].
 The X-ray source was set to a tube voltage of 80.0 kV and a tube current of 125.0 µA, the x-ray spectrum was filtered by 1mm of Aluminium prior to incidence onto the sample. For each sample, depending on the sample height, we recorded a set of either 4 or 5 stacked scans overlapping its height.
 Each stack was recorded with 482 TIFF projections of 1632 x 1092 pixels at every 0.4° over a 180° sample rotation.
 Every single projection was exposed for 950 ms and 3 projections were averaged to greatly reduce image noise.