Added ultra fine profile and updated standard for use with blue trans…

…parent PLA

README.md

@@ -1,4 +1,6 @@
 Ultimaker_Cura_Profile
 ======================
 
-Cura profile customized for the hacklab Ultimaker
+Cura profile customized for the hacklab Ultimaker
+
+Ultra Fine profile is currently extremely experimental

hacklab_standard.ini

@@ -8,16 +8,16 @@ swap_xz = False
 swap_yz = False
 model_scale = 1
 model_rotate_base = 0
-filament_diameter = 2.75
+filament_diameter = 2.64
 nozzle_size = 0.4
 layer_height = 0.2
 wall_thickness = 0.8
 solid_layer_thickness = 0.6
 fill_density = 20
 skirt_line_count = 2
 skirt_gap = 3.0
-print_speed = 100
-print_temperature = 218
+print_speed = 90
+print_temperature = 220
 support = None
 enable_raft = False
 filament_density = 1.00

hacklab_ultra_fine.ini

@@ -0,0 +1,100 @@
+[profile]
+machine_center_x = 100
+machine_center_y = 100
+flip_x = False
+flip_y = False
+flip_z = False
+swap_xz = False
+swap_yz = False
+model_scale = 1
+model_rotate_base = 0
+filament_diameter = 2.64
+nozzle_size = 0.4
+layer_height = 0.1
+wall_thickness = 1.2
+solid_layer_thickness = 0.6
+fill_density = 0
+skirt_line_count = 2
+skirt_gap = 1.5
+print_speed = 100
+print_temperature = 220
+support = None
+enable_raft = False
+filament_density = 1.00
+retraction_min_travel = 5.0
+retraction_speed = 40.0
+retraction_amount = 2.0
+retraction_extra = 0.0
+travel_speed = 170
+max_z_speed = 3.0
+bottom_layer_speed = 50
+cool_min_layer_time = 5
+fan_enabled = True
+bottom_thickness = 0.3
+enable_skin = True
+extra_base_wall_thickness = 0.0
+cool_min_feedrate = 10
+fan_layer = 1
+fan_speed = 100
+fan_speed_max = 100
+raft_margin = 5
+raft_base_material_amount = 100
+raft_interface_material_amount = 100
+support_rate = 50
+support_distance = 0.5
+infill_type = Line
+solid_top = True
+fill_overlap = 15
+bridge_speed = 60
+sequence = Loops > Perimeter > Infill
+force_first_layer_sequence = True
+joris = False
+retract_on_jumps_only = True
+enable_dwindle = True
+dwindle_pent_up_volume = 0.7
+dwindle_slowdown_volume = 5.0
+
+[alterations]
+start.gcode = ;Sliced {filename} at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	M92 X79.1359 Y79.1359 Z492.307 E933.3940
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G92 X0 Y0 Z0 E0         ;reset software position to front/left/z=0.0
+	G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
+	G92 E0                  ;zero the extruded length
+	G1 F200 E3              ;extrude 3mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	;go to the middle of the platform (disabled, as there is no need to go to the center)
+	;G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+	G1 F{travel_speed}
+end.gcode = ;End GCode
+	M104 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+replace.csv = 
+support_end.gcode = 
+nextobject.gcode = ;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
+	G92 E0
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 F{travel_speed}           ;move Z up a bit and retract filament even more
+	G90                                    ;absolute positioning
+	G1 Z{clear_z} F{max_z_speed}
+	G92 E0
+	G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+	G1 F200 E5
+	G92 E0
+support_start.gcode = 
+