LED driver for the dome project. Each board can control 8 LED strips, each of which is
A python server that listens on UDP for a serialized 24bit RGB stream (8 bits per channel) that describes a 24 wide by 160 high image from top left to bottom right. (Yo dawg your aspect ratio is wrong). The data is then output to a Teensy over a high-speed serial port.
Usage:
cd host
python host.py -p /dev/tty.usb*
PCB design for the breakout board
Firmware that should be compiled using the Makefile, then uploaded to the teensy using the teensy utility.