Commits on Jan 14, 2022

1. nrf5x: Fix EP OUT race conditions …

   When dcd_edpt_xfer() starts new transfer two separate problems were observed.
   For both problems stream of OUT packets was pouring from host.
   
   First problem was that total_len and actual_len were not atomic.
   In case where incoming OUT packets are less (63) than MPS (64), actual_len and total_len
   are set 63.
   Then transfer complete from USBD is called that will schedule next 64 bytes transfer.
   At that point incoming packet would start DMA if there is place in RAM, normally
   it does not happen since actual_len == total_len.
   If packets arrives and interrupt is raised after total_len is set (64) but actual_len is still 63 from
   previous transfer, interrupt code sees that there is place in ram (1 byte) and transfer this 1 byte
   to buffer that was already filled with previous packet.
   To remedy this USB interrupt is blocked during transfer setup.
   
   Second problem can happen when dcd_edpt_xfer setups xfer->total_len and actual_len correctly
   but then context switch happens before xfer->data_received is checked.
   If during this time two packets arrive one will be copied to RAM second will stay in endpoint with
   data_received set to 1.
   Then when xfer_edpt_xfer() checks data_receive flag it starts DMA again overwriting data.
   To remedy this, data_received is checked together with check if data was already transferred.
   If transfer was complete, there is no need to start DMA yet.
   In such case data_received will be handled in same place by next xfer_edpt_xfer() correctly.

   

   kasjer committed Jan 14, 2022
   Configuration menu

   • View commit details
   • Copy full SHA for da44fe3
   • Browse repository at this point

   Copy the full SHA

   da44fe3 View commit details

   Browse the repository at this point in the history